PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens Robicon
- A5E01161649
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E01161649 ROBICON power control board
Siemens A5E01161649 is a ROBICON power control board used in the ROBICON Perfect Harmony drives. It controls and monitors power-cell switching within the medium-voltage drive and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC control class, Cell-defined power rating, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC control class, Cell-defined power rating, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete ROBICON power control board
ACTUAL APPLICATIONS
Application context for A5E01161649
Manufacturer documentation places the Robicon Power Control Board in practical drive applications. The three cases below describe different operating tasks in which A5E01161649 performs its documented product-family role with the configured companion equipment.
-
01 · AUTOMOTIVE
Regulate body transfer with Robicon Power process control
Within the skid conveyors and lift stations, A5E01161649 provides its specified system function as a Robicon Power Control Board. During model change, the system uses this function to coordinate motion requests and station interlocks, helping it keep the assembly takt moving. -
02 · PULP & PAPER
Align reel and winder operation with Robicon Power
Within the reels, slitters and winding drums, A5E01161649 supports the configured automation role as a Robicon Power Control Board. During roll change, the system uses this function to synchronize winding torque with roll diameter, helping it build a roll with controlled tension. -
03 · MACHINERY MANUFACTURING
Manage press sequencing with Robicon Power process control
Inside the feed systems, dies and safety interfaces, A5E01161649 handles its designated signal or control duty as a Robicon Power Control Board. During part change, the system uses this function to apply the selected product recipe to the sequence, helping it produce the intended part without skipping an interlock.
Technical specifications for A5E01161649
-
Product ModelA5E01161649
-
Product ParametersROBICON power control board
-
In stock1 unit
-
ManufacturerSiemens Robicon
-
Component ClassROBICON power control board
-
Drive FamilyROBICON Perfect Harmony drives
-
Primary FunctionControls and monitors power-cell switching within the medium-voltage drive
-
Power ArchitecturePower-cell control electronics
-
Voltage Class24 V DC control class
-
Current RatingCell-defined power rating
-
Power SectionPower-cell electronics section
-
Mechanical DesignService circuit-board assembly
-
Electrical InterfaceGate, fibre and feedback interfaces
-
Commissioning CheckCheck cell communication and firing response
View all additional
Alternative Names
A5E01161649
ROBICON Perfect Harmony drives ROBICON power control board
Siemens ROBICON power board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E01161649 to the installed ROBICON Perfect Harmony drives
Siemens A5E01161649 is a ROBICON power control board used in the ROBICON Perfect Harmony drives to control and monitors power-cell switching within the medium-voltage drive. Its power-cell control electronics role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC control class, Cell-defined power rating, the power-cell electronics section, service circuit-board assembly and gate, fibre and feedback interfaces. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete check cell communication and firing response, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: A5E01161649
- Function: Controls and monitors power-cell switching within the medium-voltage drive
- Family: ROBICON Perfect Harmony drives
The Siemens A5E01161649 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E01161649 identity before exchange
Treat A5E01161649 as a configuration-specific ROBICON power control board for the ROBICON Perfect Harmony drives. Match the complete Siemens article number, installed power-cell electronics section, board or module revision, mechanical design and approved replacement record before removal.
Photograph gate, fibre and feedback interfaces, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented service circuit-board assembly and any cooling or discharge provisions while the drive is isolated.
After installation, check cell communication and firing response. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: A5E01161649
- Installed section: Power-cell electronics section
- Release check: Check cell communication and firing response
The Siemens A5E01161649 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for A5E01161649
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E01161649 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 20 × 4 cm
-
Shipping weight0.5 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E01161649
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
When should a technician select A5E01161649 for power-cell switching in ROBICON Perfect Harmony drives?
Use A5E01161649 only for controls and monitors power-cell switching within the medium-voltage drive in the documented ROBICON Perfect Harmony drives. Engineering must confirm the installed power-cell electronics section, 24 V DC control class and controlled drawing before work. -
What symptoms should maintenance record before blaming A5E01161649 for a fibre communication path fault?
For A5E01161649, review drive alarms, DC-link or supply readings, command status, gate, fibre and feedback interfaces and the physical condition of the ROBICON power board. Compare results with a known-good channel where the site procedure permits. -
Which wiring and hardware records are needed before a A5E01161649 replacement?
Before removing A5E01161649, save parameters where applicable and photograph the service circuit-board assembly, connector keys, cable labels, shield and protective-earth routes, adjacent assemblies and full nameplate. -
Which post-replacement tests release the ROBICON power board back to service?
After installation, check cell communication and firing response. Maintenance should then review diagnostics, prove the cell firing test under controlled conditions and record the final result before production release. -
What should a reseller compare for A5E01161649 as the correct ROBICON power board?
Match the complete A5E01161649 article, ROBICON power board, 24 V DC control class, Cell-defined power rating, hardware suffix and installed ROBICON Perfect Harmony drives configuration. A similar appearance or shortened article number is insufficient. -
What should a distributor disclose about the condition and revision of A5E01161649?
The offer for A5E01161649 should state label revision, new or surplus condition, visible inspection result and whether connectors, memory, software, manuals or other accessories are included. Unlisted accessories are excluded. -
Which delivery details should appear on a quotation for A5E01161649?
For A5E01161649, request confirmed stock status, dispatch time, ship-from location, packed size, shipping weight and courier options. The written quotation controls the final delivery terms. -
What paperwork should procurement request with the ROBICON power board?
A A5E01161649 quotation should identify the supplied Data Sheet and Installation Instructions, 12-month AMIKON warranty, HS reference, origin, return conditions and any document or licence limitations.
READY TO VERIFY YOUR PART?
Get a A5E01161649 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
