
























Kindly Reminder
Can't Find Your Required Components?
If your specific control system parts are not listed on our website, contact us immediately.
Our procurement specialists will source genuine new components tailored to your technical requirements.
All Amikon-supplied automation parts include:
12 Months Warranty
24h /7 online Service ( info@amikon.cn | +86 18020776786 )
Original new Factory Sealed
Synchronous servo motor
SIMOTICS S synchronous servo motor
1FK7 Compact 6.0 Nm, 100K, 4500 rpm 1.74 kW
naturally cooled IM B5 (IM V1, IM V3)
power/signal connector plug rotatable by 270°
ABSOLUTE ENCODER 2048 P/REV (ENCODER A-2048)
WITH DRIVE-CLIQ INTERFACE
PERFORMANCE REDUCTION BY 10% DUE TO
ABSOLUTE ENCODER
PLAIN SHAFT, TOLERANCE N
WITH HOLDING BRAKE DEGREE
OF PROTECTION IP64
Replacement IPD card
SINAMICS S120
Replacement IPD card
for air-cooled Motor Module
500-690V
450kW
Replacement IPD card
SINAMICS S150
Replacement IPD card
for air-cooled Motor Module
basic unit 380-480V
110kW
Replacement IPD card
SINAMICS S120
Replacement IPD card
for air-cooled Motor Module
500-690V, 710kW
Replacement IPD card
SINAMICS S120
Replacement IPD card
for air-cooled Basic Line Module
560kW 500-690V
3AC/680A
Replacement IPD card
SINAMICS S120
Replacement IPD card
for air-cooled Basic Line Module
560kW 500-690V
3AC/680A
G120 Standard Control Unit
SINAMICS G120 CONTROL UNIT
CU240E-2 E-TYPE SAFETY INTEGRATED
STO RS485-INTERFACE
USS-PROTOCOL 6DI, 3DO, 2AI, 2AO
MAX 1F-DI PTC/KTY INTERFACE
USB- AND SD/MMC-INTERFACE
PROTECTION IP20
AMBIENT TEMP 0 TO +50 DEG C
WITHOUT POWER MODULE AND PANEL
Driver Board
HV-IGBT modules: 1900A
Input Voltage Range:+24V DC
Isolation Voltage:min. 4000 V RMS
IGBT Voltage Monitoring:±5%
Gate Drivers Per Phase:2 channels
Current Transformer
CURRENT TRANSFORMER
2000 AMP
15-24VDC
AC Input Range: 0–2000 A AC
Overload Capacity: 130% of Ipn for 10 sec
DC Voltage or Current:4–20 mA (Two-Wire Loop)
Input Voltage: 15–24 V DC ±10%
Power Consumption: <2 W
BUSBAR CURRENT TRANSFORMER
Primary Current (Ipn): Range 50–600 A
Secondary Current (Isn):1 A or 5 A
Frequency: 50/60 Hz
Insulation Voltage:720 V AC
Operating: -25°C to +60°C
Storage: -40°C to +70°C
PSB11-BOARD
PSB11-BOARD/R3 SIC
HP/MC - SINAMICS COMPONENTS (LD)
Link Voltage (DC): Supports 600/510–720 V D
Output Voltage (AC): Up to 480 V AC 3-phase
Continuous Motor Current: Up to 1,600 A
Peak Current: Short-term 2,500 A
Switching Freq: Up to 5–20 kHz
DOUBLE MOTOR MODULE
SINAMICS S120 DOUBLE MOTOR MODULE
INPUT: DC 600V
OUTPUT: 3AC 400V, 3A/3A
FRAME SIZE: BOOKSIZE D-TYPE
INTERNAL AIR COOLING OPTIMIZED PULSE SAMPLE
AND SUPPORT OF THE EXTENDED SAFETY
INTEGRATED FUNCTIONS
INCL. DRIVE-CLIQ CABLE
CPU BOARD
CPU BOARD ELECTRONIC MODULE
FOR CONVERTER
RAM ≤ 256 MB
Flash ≤ 512 MB
Digital I/O:24 VDC, ±10%
Analog Inputs: 0–10 V/4–20 mA
Input Voltage: 24 VDC ±10%
Isolation: Reinforced (3000 VAC)
Max Power Draw: 20–50 W
REPLACEMENT IPD CARD
SINAMICS S120
Replacement IPD card
for air-cooled Basic Line Module
710kW 380-480V 3AC/1500A
Interface Module
SIMATIC ET 200SP
PROFIBUS bundle IM
IM 155-6DP HF, max
32 I/O modules and 16 ET 200AL modules
Multi-hotswap
bundle consists of: Interface module (6ES7155-6BU01-0CN0)
Server module (6ES7193-6PA00-0AA0)
PROFIBUS connector (6ES7972-0BB70-0XA0)
SINAMICS S120 CONTROL UNIT
SINAMICS S120
CONTROL UNIT CU310-2 PN
WITH PROFINET INTERFACE
WITHOUT COMPACTFLASH CARD
Adapter Cable
SINAMICS S120
C/D Type Adapter Cable
FOR MOTOR CONNECTION
2,5MM2 FOR MOTOR MODULES 3-18A
GH180 Power cell
SINAMICS PERFECT HARMONY
GH180 Power cell 200 A GenIV
Power supply unit SL10 230 V
AC/48V DC Pulse
Smart Line Module
SINAMICS S120
Smart Line Module
380-480V 3AC, 50/60 Hz
Output: 510-650 V DC, 1300 A
Rated power: 630kW Built-in unit
IP00 Internal air cooling
incl. Drive-CLiQ cable
CompactFlash card
SINAMICS S120
CompactFlash card
incl. performance expansion
V5.2 Service Pack 3
Replacement power block
SINAMICS Replacement power block
for 380-480V 3AC, 50/60 Hz
1700A Smart Line Module
rectifier Painted modules
and nickel-plated busbars

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.