PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3060-4AB20-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3060-4AB20-0AA0 sinamics drive cliq cable
Siemens 6SL3060-4AB20-0AA0 is a sinamics drive cliq cable in the SINAMICS drive systems. It is used to control the connected motor or drive function within the configured machine.
Its documented configuration includes rated voltage of ≤30 V DC, operating voltage of 24 V DC, cable system of DRIVE-CLiQ, and connector type of DRIVE-CLiQ plugs. During operation, the sinamics drive cliq cable processes the configured drive commands and regulates the connected motor or power section.
Its documented configuration includes rated voltage of ≤30 V DC, operating voltage of 24 V DC, cable system of DRIVE-CLiQ, and connector type of DRIVE-CLiQ plugs. During operation, the sinamics drive cliq cable processes the configured drive commands and regulates the connected motor or power section.
BEFORE YOU BUY
Confirm the complete sinamics drive cliq cable
ACTUAL APPLICATIONS
Where 6SL3060-4AB20-0AA0 Fits Across Major Industry Sectors
Uses span paper, printing and plastics, subject to verified compatibility, operating conditions and project requirements.
-
01 · PULP & PAPER
Paper Manufacturing, Material Processing and Paper Converting
Paper manufacturing and processing for commercial paper product markets.Paper converting and finishing within industrial paper production operations. -
02 · PRINTING & PACKAGING
Commercial Printing Facilities and Industrial Packaging Production
Commercial printing and production of printed materials for businesses.Industrial product packaging and packing across manufacturing production processes. -
03 · PLASTICS PROCESSING
Plastic Product Molding and Commercial Polymer Material Processing
Injection molding of plastic products for commercial manufacturing markets.Blow molding and thermoforming for industrial plastic product manufacturing.
Technical specifications for 6SL3060-4AB20-0AA0
-
Product Model6SL3060-4AB20-0AA0
-
Product Parameterssinamics drive cliq cable
-
In stock1 unit
-
ManufacturerSiemens
-
Rated Voltage≤30 V DC
-
Operating Voltage24 V DC
-
Cable SystemDRIVE-CLiQ
-
Connector TypeDRIVE-CLiQ plugs
-
Product FamilySINAMICS
-
Operating Temperature0 °C to +55 °C
-
Storage Temperature-40 °C to +70 °C
-
Relative Humidity≤95%, non-condensing
-
InstallationControl cabinet
-
Lifecycle ClassSiemens spare part
-
Export ControlAL:N / ECCN:N
-
Quantity Unit1 piece
View all additional
Alternative Names
6SL3060 4AB20 0AA0
SINAMICS drive systems sinamics drive cliq cable
Siemens sinamics drive cliq cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6SL3060-4AB20-0AA0 to the installed SINAMICS drive systems
Siemens 6SL3060-4AB20-0AA0 is a sinamics drive cliq cable used in the SINAMICS drive systems. Apply 6SL3060-4AB20-0AA0 only in the documented SINAMICS drive systems equipment position. Match the article marking, power class, controlled section and approved system drawings before any installation work begins.
Photograph connector keying, cable labels, shields, protective earth and adjacent assemblies for 6SL3060-4AB20-0AA0. Preserve the documented routing and mechanical position while exchanging the installed component. Confirm installed equipment voltage class, model-specific channel current, the exact mechanical position and the approved system configuration before connection.
After fitting 6SL3060-4AB20-0AA0, restore the controlled settings, review diagnostics and test the connected motor, converter or interface at a safe operating point. Keep the measured results in the maintenance record. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 6SL3060-4AB20-0AA0
- Product class: sinamics drive cliq cable
- Family: SINAMICS drive systems
The Siemens 6SL3060-4AB20-0AA0 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6SL3060-4AB20-0AA0 identity before exchange
Replace 6SL3060-4AB20-0AA0 only after matching the full article identity, sinamics drive cliq cable, installed sinamics drive systems service section and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, 6sl3060-4ab20-0aa0 keyed connector set, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete validate 6sl3060-4ab20-0aa0 diagnostics and function. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 6SL3060-4AB20-0AA0
- Connection: 6SL3060-4AB20-0AA0 keyed connector set
- Test: Validate 6SL3060-4AB20-0AA0 diagnostics and function
The Siemens 6SL3060-4AB20-0AA0 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SL3060-4AB20-0AA0
- Installation checks matched to SINAMICS drive systems
- Exact Siemens identity required before service
Documentation for Siemens 6SL3060-4AB20-0AA0 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size25.5 × 18.5 × 3 cm
-
Shipping weight1.34 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3060-4AB20-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can 6SL3060-4AB20-0AA0 be selected from its physical outline alone?
For 6SL3060-4AB20-0AA0, no. Confirm the complete article identity, sinamics drive cliq cable role, electrical class, interface and companion hardware before deciding interchangeability. -
What grounding and shielding checks apply when installing 6SL3060-4AB20-0AA0?
For 6SL3060-4AB20-0AA0, restore every documented shield termination and protective-earth conductor, then check continuity before applying power. -
What photos are most useful when requesting 6SL3060-4AB20-0AA0 from a distributor?
For 6SL3060-4AB20-0AA0, provide clear images of the whole label, connectors, installed slot, adjacent assemblies and cable markings together with the exact order code. -
Which system family check prevents misapplication of 6SL3060-4AB20-0AA0?
For 6SL3060-4AB20-0AA0, confirm that the installed system is SINAMICS drive systems and that the product function and equipment section match the controlled drawings. -
Which nameplate details distinguish 6SL3060-4AB20-0AA0 from nearby Siemens service parts?
For 6SL3060-4AB20-0AA0, match the full article number, manufacturer marking, documented revision and installed SINAMICS drive systems equipment position; a partial code is not enough. -
Which connector records reduce risk when replacing 6SL3060-4AB20-0AA0?
Record 6SL3060-4AB20-0AA0 keyed connector set, connector keying, terminal numbers, cable destinations, shielding and protective-earth points. -
How should technicians verify companion hardware for 6SL3060-4AB20-0AA0?
Verify 6SL3060-4AB20-0AA0 exact designation, the controller or converter section, connector keying and the current Siemens equipment documentation. -
How should the documented revision of 6SL3060-4AB20-0AA0 be evaluated?
For 6SL3060-4AB20-0AA0, compare the documented revision and interface requirements with the installed equipment record; do not infer equivalence from appearance.
READY TO VERIFY YOUR PART?
Get a 6SL3060-4AB20-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
