PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3200-0SP01-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3200-0SP01-0AA0 CIM power supply assembly
Siemens 6SL3200-0SP01-0AA0 is a CIM power supply assembly in the SINAMICS PM240. It is used to supply the specified operating power to the connected automation hardware.
Its documented configuration includes component class of CIM PM-IF power supply, drive family of SINAMICS PM240, primary function of Powers control interface electronics, and power architecture of Control-interface supply assembly. During operation, the CIM power supply assembly converts and distributes the specified supply voltage to the connected hardware.
Its documented configuration includes component class of CIM PM-IF power supply, drive family of SINAMICS PM240, primary function of Powers control interface electronics, and power architecture of Control-interface supply assembly. During operation, the CIM power supply assembly converts and distributes the specified supply voltage to the connected hardware.
BEFORE YOU BUY
Confirm the complete CIM power supply assembly
ACTUAL APPLICATIONS
Where 6SL3200-0SP01-0AA0 Fits Across Major Industry Sectors
Uses span textiles, logistics and power, subject to verified compatibility, operating conditions and project requirements.
-
01 · TEXTILE MANUFACTURING
Synthetic Fiber Manufacturing and Industrial Tire Cord Production
Manmade fiber production and processing within the textile industry.Tire cord manufacturing for industrial textile and reinforcement products. -
02 · TRANSPORT & LOGISTICS
Rail Freight Handling and Industrial Lifting Operations
Rail freight transportation and cargo handling within logistics operations.Industrial material handling and lifting for goods movement operations. -
03 · POWER GENERATION
Wind Energy Generation and Commercial Hydroelectric Power Production
Wind energy generation supplying electricity for regional utility networks.Hydroelectric power production supporting industrial and public electricity demand.
Technical specifications for 6SL3200-0SP01-0AA0
-
Product Model6SL3200-0SP01-0AA0
-
Product ParametersCIM power supply assembly
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassCIM PM-IF power supply
-
Drive FamilySINAMICS PM240
-
Primary FunctionPowers control interface electronics
-
Power ArchitectureControl-interface supply assembly
-
Voltage ClassPM240 frame-size GX class
-
Current RatingSignal and auxiliary supply
-
Line FrequencyConverter-dependent switching
-
Power SectionCIM PM-IF section
-
Mechanical DesignBoard and mounting kit
-
Electrical InterfacePM240 FSGX CIB interface
-
Cooling IntegrationInstalled inside power module
-
Board ProtectionFactory electronic assembly
-
Busbar TreatmentInternal low-voltage distribution
-
Service ClassificationSiemens spare part
-
Commissioning CheckVerify FSGX mounting arrangement
View all additional
Alternative Names
6SL3200 0SP01 0AA0
SINAMICS PM240 CIM power supply assembly
Siemens CIM power supply assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3200-0SP01-0AA0 to the installed SINAMICS PM240
Siemens 6SL3200-0SP01-0AA0 is a CIM power supply assembly used in the SINAMICS PM240.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SL3200-0SP01-0AA0
- Product class: CIM power supply assembly
- Family: SINAMICS PM240
The Siemens 6SL3200-0SP01-0AA0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3200-0SP01-0AA0 identity before exchange
Replace 6SL3200-0SP01-0AA0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SL3200-0SP01-0AA0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SL3200-0SP01-0AA0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SL3200-0SP01-0AA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3200-0SP01-0AA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size55 × 34 × 22 cm
-
Shipping weight3.6 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3200-0SP01-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function does the PM240 FSGX CIM supply perform?
In 6SL3200-0SP01-0AA0, it performs powers control interface electronics within the documented SINAMICS PM240 configuration. -
Which electrical rating applies to the PM240 FSGX CIM supply?
For 6SL3200-0SP01-0AA0, verify PM240 frame-size GX class and Signal and auxiliary supply against the installed power section. -
How should the CIM PM-IF section be recorded for the PM240 FSGX CIM supply?
Before removing 6SL3200-0SP01-0AA0, photograph the exact section position, labels and adjacent assemblies. -
Which connection checks matter for the PM240 FSGX CIM supply?
Inspect PM240 FSGX CIB interface on 6SL3200-0SP01-0AA0 for orientation, contact condition, clearance and correct seating. -
How is cooling preserved for the PM240 FSGX CIM supply?
For 6SL3200-0SP01-0AA0, preserve the documented thermal path, seals, airflow or coolant arrangement: Installed inside power module. -
Can the PM240 FSGX CIM supply replace a similar Siemens component?
Match the full 6SL3200-0SP01-0AA0 article number, section role, board designation and mechanical interface; appearance is insufficient. -
Which test releases the PM240 FSGX CIM supply to service?
For 6SL3200-0SP01-0AA0: Verify FSGX mounting arrangement. Then verify insulation, diagnostics and the affected drive function. -
What quotation details identify the PM240 FSGX CIM supply?
Provide the 6SL3200-0SP01-0AA0 nameplate, installed CIM PM-IF section, PM240 FSGX CIB interface, quantity, photographs and destination.
READY TO VERIFY YOUR PART?
Get a 6SL3200-0SP01-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
