PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens LOGO!
- 6ED1055-1CB10-0BA2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Eight DC input and output channels for LOGO! 8
Siemens 6ED1055-1CB10-0BA2 is a LOGO! DM16 24 digital expansion module. Its eight digital inputs and eight sourcing transistor outputs extend a compatible LOGO! 8 installation operating from a nominal 24 V DC supply.
The four-module-width enclosure measures 71.5 × 90 × 58 mm and mounts on a 35 mm DIN rail. Allow for the expansion position, DC supply capacity and 0.3 A per-output limit when allocating the additional control points.
The four-module-width enclosure measures 71.5 × 90 × 58 mm and mounts on a 35 mm DIN rail. Allow for the expansion position, DC supply capacity and 0.3 A per-output limit when allocating the additional control points.
BEFORE YOU BUY
Allocate channels and supply capacity before ordering
ACTUAL APPLICATIONS
Where 6ED1055-1CB10-0BA2 fits in compact automation
Siemens LOGO! application examples inform these system-level uses. The expansion module adds I/O; the base program, wiring and connected loads require separate validation.
-
01 · PROCESS SEQUENCING
Additional vessel and drive-command signals
Siemens includes cream-stirrer control among LOGO! applications. A DM16 24 can extend discrete vessel-status signals and appropriately interfaced drive commands in an engineered stirring sequence. -
02 · TEXTILE TREATMENT
Interlocks for heating and conveyor stages
The Siemens textile heat-treatment example combines heating with conveyor sequencing. Additional DC points can serve the validated interlocks and external switching interfaces; process control remains in the base program. -
03 · ENERGY MONITORING
Discrete states for solar-utilization timing
Siemens lists solar-utilization monitoring as a LOGO! application. This digital expansion can collect operating-state contacts for timing in the base controller; analog measurements require a separate suitable interface.
Technical specifications for 6ED1055-1CB10-0BA2
-
Product Model6ED1055-1CB10-0BA2
-
Product ParametersLOGO! DM16 24 Expansion Module
-
In stock1 unit
-
ManufacturerSiemens
-
Supply voltage24 V DC; permissible range 20.4–28.8 V DC
-
Digital inputs8 non-isolated DC inputs
-
Input thresholdsSignal 0: below 5 V DC; signal 1: above 12 V DC
-
Input currentSignal 1 typ. 2.0 mA; signal 0 max. 0.85 mA
-
Input delayRising and falling max. 1.5 ms
-
Digital outputs8 sourcing transistors; max. 0.3 A per channel
-
Output protectionShort-circuit and overload protection
-
Switching frequencyMax. 10 Hz resistive; 0.5 Hz inductive
-
Mounting35 mm DIN rail; four module widths
-
Operating temperature−20 to +55 °C; no condensation
View all additional
Alternative Names
6ED1055-1CB10-0BA2
LOGO! DM16 24
Siemens LOGO! 8DI 8DO Expansion
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
LOGO! 8 DIGITAL EXPANSION
Extend the digital I/O budget with a DM16 block
6ED1055-1CB10-0BA2 adds eight DC inputs and eight sourcing outputs to the LOGO! 8 expansion bus. Check the complete system allocation against the LOGO! maximum of 24 digital inputs and 20 digital outputs.
The module occupies four module widths. Siemens permits two matching DM8 expansions to be replaced by a corresponding DM16 without a program change; the actual terminal schedule, voltage class and installation must still be checked.
The exact datasheet specifies typical high-state input current of 2.0 mA and a maximum low-state current of 0.85 mA. Match the connected signal devices and shared DC reference to the documented input limits.
Features:
- Exact Siemens order code: 6ED1055-1CB10-0BA2
- LOGO! DM16 24 with 8 DI and 8 transistor outputs
- Check the 24 DI / 20 DO system limits
The Siemens 6ED1055-1CB10-0BA2 LOGO! DM16 24 requires its supply, terminal assignment and base-module arrangement to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Identify the complete 6ED1055-1CB10-0BA2 article before allocating an eight-input/eight-output replacement. A relay-output DM16 is not the same electrical interface as this sourcing-transistor version.
A move from two matching DM8 24 modules to one DM16 24 changes physical terminal locations even when the base program can remain unchanged. Prepare and verify the updated terminal schedule before removal.
Inspect the side connector, expansion order and power supply after replacement. Confirm normal RUN indication and prove the eight input and eight output assignments against the installed project.
Features:
- Match the complete 6ED1055-1CB10-0BA2 order code
- Eight-channel terminal allocation and I/O budget
- DC load supply capacity and reference wiring
The Siemens 6ED1055-1CB10-0BA2 LOGO! DM16 24 requires replacement verification of electrical ratings, expansion order, field wiring and the base-module project before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Selected official pages are included in the Amikon document packages. Accessories, cables, software and certificates are supplied only when listed in the quotation.
Features:
- Available Siemens document references are confirmed before order
- Software licensing and project backups remain the customer's responsibility
- Accessories are supplied only when listed in the quotation
Documentation for the Siemens 6ED1055-1CB10-0BA2 LOGO! DM16 24 documents must match the complete article number and installed expansion arrangement; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size9.30 × 10.80 × 7.50 cm
-
Shipping weightApprox. 0.17 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginChina
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ED1055-1CB10-0BA2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can one DM16 24 replace two DM8 24 expansions without rewriting the program?
Siemens allows two matching DM8 modules to be replaced by the corresponding DM16 without a program change. Confirm voltage and output type, retain the intended I/O sequence, and rework the terminal schedule because the physical connections differ. -
What current budget should be checked for a fully loaded DM16 24?
The manual lists 25–50 mA with unloaded digital outputs and a maximum-load figure of 2.4 A at 24 V DC. Size the supply and wiring for the complete installation, including other modules and connected loads. -
Will all eight added outputs remain addressable in an already expanded system?
Not necessarily. LOGO! supports a maximum of 24 digital inputs and 20 digital outputs. Count the base and existing expansions before reserving channels for this DM16. -
How much additional rail space is needed compared with one DM8?
This module is 71.5 mm wide, whereas a DM8 is 35.5 mm wide. Check the actual cabinet layout and required installation clearances before substituting the larger block. -
What does a red RUN/STOP indicator suggest after installation?
The manual associates red STOP with no communication with the module to the left. With power safely isolated, inspect the expansion connector and arrangement, then verify supplies and the base operating state. -
Does the DM16 need a separate IP address in the network plan?
No. It has no independent Ethernet port or IP configuration. The LOGO! base module handles supported network functions while the DM16 exchanges I/O through the side expansion interface. -
Can an unused DM16 input accept a 0–10 V process measurement?
No. These are digital inputs with documented low and high thresholds, not analog measurement channels. Allocate a suitable LOGO! analog input interface for that signal. -
What cable-length limit should the panel designer use for the unshielded I/O run?
The manual lists a maximum unshielded line length of 100 m. That limit does not remove the need to check voltage drop, interference, routing and the installation conditions for the actual field circuit.
READY TO VERIFY YOUR PART?
Get a 6ED1055-1CB10-0BA2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
