PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E02915323 MICROMASTER power drive module
Siemens A5E02915323 is a MICROMASTER power drive module for the MICROMASTER 440 drives. It is used to control 18.5–37 kW motor output. Confirm the exact article, electrical class, interfaces, companion hardware and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete MICROMASTER power drive module
ACTUAL APPLICATIONS
Application context for A5E02915323
Manufacturer documentation places the Micromaster Power Drive Module in practical drive applications. The three cases below describe different operating tasks in which A5E02915323 performs its documented product-family role with the configured companion equipment.
-
01 · AUTOMOTIVE
Govern robotic joining with Micromaster Power
During operation of the robots, fixtures and clamp groups, A5E02915323 supports the configured automation role as a Micromaster Power Drive Module. During station restart, the system uses this function to confirm tooling readiness before the cycle starts, helping it prevent an incomplete joining cycle. -
02 · WATER & WASTEWATER
Regulate sludge-pump control with Micromaster Power
At the control layer of the positive-displacement pumps and flow feedback, A5E02915323 performs its assigned control role as a Micromaster Power Drive Module. During solids-loading change, the system uses this function to hold the commanded feed rate as process load changes, helping it keep sludge transfer stable. -
03 · MACHINERY MANUFACTURING
Protect test-stand control with Micromaster Power
In the automation chain for the load actuators and measurement channels, A5E02915323 operates in its approved product-family role as a Micromaster Power Drive Module. During test-point transition, the system uses this function to move the test article through commanded operating points, helping it capture comparable results at each condition.
Technical specifications for A5E02915323
-
Product ModelA5E02915323
-
Product ParametersMICROMASTER power drive module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassMICROMASTER power drive module
-
Drive FamilyMICROMASTER 440 drives
-
Primary FunctionControls 18.5–37 kW motor output
-
Power ArchitectureDigital converter electronics
-
Voltage Class380–480 V AC ±10%
-
Current Rating18.5 / 22 / 37 kW range
-
Control Supply50/60 Hz three-phase input
-
Power SectionInverter power section
-
Mechanical DesignPlug-in service assembly
-
Electrical InterfaceMains, motor and control plugs
-
Cooling IntegrationCabinet cooling arrangement
-
Board DesignationA5E02915323 assembly
-
Service RoleSiemens service component
-
Product StatusVerify installed revision
-
Commissioning CheckRun diagnostics and functional test
View all additional
Alternative Names
A5E02915323
MICROMASTER 440 drives MICROMASTER power drive module
Siemens MICROMASTER power drive module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E02915323 to the installed MICROMASTER 440 drives
Siemens A5E02915323 is a MICROMASTER power drive module used in the MICROMASTER 440 drives to control 18.5–37 kW motor output. Its digital converter electronics architecture must match the documented drive configuration, controlled hardware arrangement and assigned inverter power section.
Before integration, confirm the 380–480 v ac ±10%, 18.5 / 22 / 37 kw range and 50/60 hz three-phase input. Compare the complete article, plug-in service assembly and mains, motor and control plugs with the installed equipment, cable schedule and the technical data recorded in the product PDF.
Maintain the documented cabinet cooling arrangement, isolate all hazardous energy and apply ESD protection before handling the component. Complete the specified action to run diagnostics and functional test, then review Siemens diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: A5E02915323
- Operating role: Controls 18.5–37 kW motor output
- Connection class: Mains, motor and control plugs
The Siemens A5E02915323 requires documented system integration for its inverter power section, with the final run diagnostics and functional test result recorded before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E02915323 configuration before exchange
Treat A5E02915323 as a configuration-specific MICROMASTER power drive module for the MICROMASTER 440 drives. Match the complete Siemens article identity, A5E02915323 assembly, installed hardware revision, siemens service component and documented inverter power section before removing the original component.
Photograph the plug-in service assembly, mains, motor and control plugs, cable labels, shielding, protective-earth points and adjacent assemblies. Record the 380–480 v ac ±10%, 18.5 / 22 / 37 kw range and 50/60 hz three-phase input so the replacement can be checked against the controlled drive documentation.
After installation, run diagnostics and functional test. Restore only the approved project data and interface assignments, review power-stage or controller diagnostics, test the control or power path associated with controls 18.5–37 kw motor output at a controlled operating point and retain the measured results in the maintenance record.
Features:
- Article and board: A5E02915323 assembly
- Interface record: Mains, motor and control plugs
- Release test: Run diagnostics and functional test
The Siemens A5E02915323 requires documented replacement verification for its inverter power section, with the final run diagnostics and functional test result recorded before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for A5E02915323
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E02915323 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size27.7 × 15 × 1.8 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85044090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E02915323
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What equipment accepts the MM440 power drive module?
The MM440 power drive module is used in the documented MICROMASTER 440 drives configuration for controls 18.5–37 kw motor output. -
How should the 380–480 V AC · 37 kW rating be confirmed for the MM440 power drive module?
For the MM440 power drive module, match 380–480 V AC ±10% and 18.5 / 22 / 37 kW range to the installed equipment nameplate. -
What happens inside the inverter power section for the MM440 power drive module?
The MM440 power drive module performs controls 18.5–37 kw motor output through the digital converter electronics. -
Which marking separates the MM440 power drive module?
For the MM440 power drive module, record A5E02915323 assembly together with the complete article and installed revision. -
Why must mains, motor and control plugs be photographed for the MM440 power drive module?
On the MM440 power drive module, inspect mains, motor and control plugs for keying, damage, contamination, routing and secure seating. -
What is verified on the 50/60 hz three-phase input for the MM440 power drive module?
Before energizing the MM440 power drive module, measure 50/60 hz three-phase input and confirm the documented polarity or phase condition. -
When is substitution of the MM440 power drive module unsafe?
A MM440 power drive module replacement must match its electrical class, section role, companion hardware and mechanical interface. -
Which result completes commissioning for the MM440 power drive module?
For the MM440 power drive module, run diagnostics and functional test; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a A5E02915323 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
