PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SCALANCE
- 6GK5116-0BA00-2AB2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GK5116-0BA00-2AB2 scalance x116 unmanaged switch
Siemens 6GK5116-0BA00-2AB2 is a scalance x116 unmanaged switch for the SIMATIC NET industrial communication. It is used to scalance X116 Unmanaged Switch. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete scalance x116 unmanaged switch
ACTUAL APPLICATIONS
Application context for 6GK5116-0BA00-2AB2
Manufacturer documentation places the Scalance X116 Unmana d Switch in practical network applications. The three cases below describe different operating tasks in which 6GK5116-0BA00-2AB2 performs its documented product-family role with the configured companion equipment.
-
01 · GENERAL MANUFACTURING
Coordinate conveyor-control networking during routing-table update
During operation of the zone controllers, scanners and merge stations, 6GK5116-0BA00-2AB2 serves its documented function as a Scalance X116 Unmana d Switch. During routing-table update, the system uses this function to exchange destination and congestion status between conveyor zones, helping it move material without losing its route. -
02 · INFORMATION TECHNOLOGY
Protect remote-station communication with Scalance X116
In the automation chain for the distributed I/O and supervisory servers, 6GK5116-0BA00-2AB2 supports the configured automation role as a Scalance X116 Unmana d Switch. During station reconnection, the system uses this function to restore cyclic data exchange with the remote station, helping it return the station to the controller scan. -
03 · WATER & WASTEWATER
Verify treatment-area fiber ring with Scalance X116
In the automation chain for the managed switches and process-area controllers, 6GK5116-0BA00-2AB2 serves its documented function as a Scalance X116 Unmana d Switch. During single-link interruption, the system uses this function to move process traffic over the remaining network path, helping it keep the treatment process visible during the link event.
Technical specifications for 6GK5116-0BA00-2AB2
-
Product Model6GK5116-0BA00-2AB2
-
Product Parametersscalance x116 unmanaged switch
-
In stock1 unit
-
ManufacturerSiemens
-
ManufacturerSiemens
-
Order Number6GK5116-0BA00-2AB2
-
Product TypeScalance X116 Unmanaged Switch
-
Product FamilySIMATIC NET industrial communication
-
Country of OriginGermany
-
Supply Voltage24 V DC
-
Network StandardIndustrial Ethernet
-
Data Rate10 / 100 Mbit/s
-
Port FunctionManaged communication
-
MountingDIN rail or panel
-
Connector CheckKeying and pin condition
-
Grounding CheckProtective earth continuity
-
Configuration RecordSaved engineering project
-
Diagnostic CheckModule status and fault memory
-
Commissioning TestControlled functional test
View all additional
Alternative Names
6GK5116 0BA00 2AB2
SIMATIC NET industrial communication scalance x116 unmanaged switch
Siemens scalance x116 unmanaged switch
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6GK5116-0BA00-2AB2 to the installed SIMATIC NET industrial communication
Siemens 6GK5116-0BA00-2AB2 is a scalance x116 unmanaged switch used in the SIMATIC NET industrial communication. Apply 6GK5116-0BA00-2AB2 in the specified SIMATIC NET industrial communication position and confirm the complete Siemens order number, installed hardware revision, power supply and approved engineering project before service.
Photograph terminal labels, connector keying, network or signal cabling, shields, protective earth and neighboring modules. Preserve the documented slot and configuration during exchange. Confirm germany, 24 v dc, the exact mechanical position and the approved system configuration before connection.
After fitting 6GK5116-0BA00-2AB2, restore the controlled project, review module diagnostics and test the affected I/O, HMI, network, weighing or drive function at a safe operating point. Record final acceptance results. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 6GK5116-0BA00-2AB2
- Product class: scalance x116 unmanaged switch
- Family: SIMATIC NET industrial communication
The Siemens 6GK5116-0BA00-2AB2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6GK5116-0BA00-2AB2 identity before exchange
Replace 6GK5116-0BA00-2AB2 only after matching the full article identity, scalance x116 unmanaged switch, installed 10 / 100 mbit/s and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, din rail or panel, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete controlled functional test. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 6GK5116-0BA00-2AB2
- Connection: DIN rail or panel
- Test: Controlled functional test
The Siemens 6GK5116-0BA00-2AB2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6GK5116-0BA00-2AB2
- Installation checks matched to SIMATIC NET industrial communication
- Exact Siemens identity required before service
Documentation for Siemens 6GK5116-0BA00-2AB2 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size32 × 24 × 10 cm
-
Shipping weight0.8 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GK5116-0BA00-2AB2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should protective earth be verified for 6GK5116-0BA00-2AB2?
Restore every documented earth conductor and shield termination, then verify continuity before powering 6GK5116-0BA00-2AB2. -
What service evidence should remain with 6GK5116-0BA00-2AB2?
Keep receiving inspection, wiring evidence, backup, diagnostic results, functional test and approval for 6GK5116-0BA00-2AB2. -
How should cable labels be preserved when removing 6GK5116-0BA00-2AB2?
Photograph and tag every cable connected to 6GK5116-0BA00-2AB2, retaining terminal, shield and destination references. -
Which terminals must maintenance document on 6GK5116-0BA00-2AB2?
Record terminal numbers, connector keys, cable destinations, shields and protective-earth conductors used by 6GK5116-0BA00-2AB2. -
What diagnostics should be reviewed after fitting 6GK5116-0BA00-2AB2?
Review module status, controller faults, network state and affected equipment response after fitting 6GK5116-0BA00-2AB2. -
Which project file belongs with 6GK5116-0BA00-2AB2?
Keep the approved engineering project and hardware configuration that explicitly identifies 6GK5116-0BA00-2AB2. -
Which companion hardware must match 6GK5116-0BA00-2AB2?
Verify the controller, rack, interface, power supply and adjacent modules documented for 6GK5116-0BA00-2AB2. -
What isolation procedure applies before servicing 6GK5116-0BA00-2AB2?
Follow the site lockout procedure, prove absence of hazardous voltage and secure stored energy before servicing 6GK5116-0BA00-2AB2.
READY TO VERIFY YOUR PART?
Get a 6GK5116-0BA00-2AB2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
