PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SCALANCE
- 6GK5206-2BD00-2AC2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GK5206-2BD00-2AC2 scalance x206 managed switch
Siemens 6GK5206-2BD00-2AC2 is a scalance x206 managed switch for the SIMATIC NET industrial communication. It is used to scalance X206 Managed Switch. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete scalance x206 managed switch
ACTUAL APPLICATIONS
System applications for 6GK5206-2BD00-2AC2 industrial network equipment
Official manufacturer documentation supports these system uses when the product is applied within its specified equipment.
-
01 · POWER GENERATION & UTILITIES
Generation Unit Monitoring and Control Networks
Plant communication systemsBoiler control panels and auxiliary controllersFuel-handling controllers and monitoring panels -
02 · WATER & WASTEWATER
Pumping and Treatment Process Communication Networks
Treatment communication systemsReservoir stations and level controllersSludge handling controls and drive panels -
03 · GENERAL MANUFACTURING
Production Cell Monitoring and Control Networks
Factory automation systemsConveyor controllers and barcode stationsTest stands and quality database servers
Technical specifications for 6GK5206-2BD00-2AC2
-
Product Model6GK5206-2BD00-2AC2
-
Product Parametersscalance x206 managed switch
-
In stock1 unit
-
ManufacturerSiemens
-
Product FamilySIMATIC NET industrial communication
-
Country of OriginGermany
-
Supply Voltage24 V DC
-
Network StandardIndustrial Ethernet
-
Data Rate10 / 100 Mbit/s
-
Port FunctionManaged communication
-
MountingDIN rail or panel
-
Connector CheckKeying and pin condition
-
Grounding CheckProtective earth continuity
-
Configuration RecordSaved engineering project
-
Diagnostic CheckModule status and fault memory
-
Commissioning TestControlled functional test
View all additional
Alternative Names
6GK5206 2BD00 2AC2
SIMATIC NET industrial communication scalance x206 managed switch
Siemens scalance x206 managed switch
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6GK5206-2BD00-2AC2 to the installed SIMATIC NET industrial communication
Siemens 6GK5206-2BD00-2AC2 is a scalance x206 managed switch used in the SIMATIC NET industrial communication. Apply 6GK5206-2BD00-2AC2 in the specified SIMATIC NET industrial communication position and confirm the complete Siemens order number, installed hardware revision, power supply and approved engineering project before service.
Photograph terminal labels, connector keying, network or signal cabling, shields, protective earth and neighboring modules. Preserve the documented slot and configuration during exchange. Confirm germany, 24 v dc, the exact mechanical position and the approved system configuration before connection.
After fitting 6GK5206-2BD00-2AC2, restore the controlled project, review module diagnostics and test the affected I/O, HMI, network, weighing or drive function at a safe operating point. Record final acceptance results. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 6GK5206-2BD00-2AC2
- Product class: scalance x206 managed switch
- Family: SIMATIC NET industrial communication
The Siemens 6GK5206-2BD00-2AC2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6GK5206-2BD00-2AC2 identity before exchange
Replace 6GK5206-2BD00-2AC2 only after matching the full article identity, scalance x206 managed switch, installed 10 / 100 mbit/s and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, din rail or panel, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete controlled functional test. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 6GK5206-2BD00-2AC2
- Connection: DIN rail or panel
- Test: Controlled functional test
The Siemens 6GK5206-2BD00-2AC2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 6GK5206-2BD00-2AC2
- Installation checks matched to SIMATIC NET industrial communication
- Exact Siemens identity required before service
Documentation for Siemens 6GK5206-2BD00-2AC2 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size60 × 125 × 147 cm
-
Shipping weight0.54 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GK5206-2BD00-2AC2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What configuration backup is needed before replacing 6GK5206-2BD00-2AC2?
Archive the current project, parameter set, network addresses, diagnostics and connection photographs before removing 6GK5206-2BD00-2AC2. -
How is the installed system position confirmed for 6GK5206-2BD00-2AC2?
Use the cabinet drawing, rack or panel designation, original slot record and cable labels to confirm the 6GK5206-2BD00-2AC2 position. -
How should protective earth be verified for 6GK5206-2BD00-2AC2?
Restore every documented earth conductor and shield termination, then verify continuity before powering 6GK5206-2BD00-2AC2. -
What service evidence should remain with 6GK5206-2BD00-2AC2?
Keep receiving inspection, wiring evidence, backup, diagnostic results, functional test and approval for 6GK5206-2BD00-2AC2. -
How should cable labels be preserved when removing 6GK5206-2BD00-2AC2?
Photograph and tag every cable connected to 6GK5206-2BD00-2AC2, retaining terminal, shield and destination references. -
Which terminals must maintenance document on 6GK5206-2BD00-2AC2?
Record terminal numbers, connector keys, cable destinations, shields and protective-earth conductors used by 6GK5206-2BD00-2AC2. -
What diagnostics should be reviewed after fitting 6GK5206-2BD00-2AC2?
Review module status, controller faults, network state and affected equipment response after fitting 6GK5206-2BD00-2AC2. -
Which project file belongs with 6GK5206-2BD00-2AC2?
Keep the approved engineering project and hardware configuration that explicitly identifies 6GK5206-2BD00-2AC2.
READY TO VERIFY YOUR PART?
Get a 6GK5206-2BD00-2AC2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
