PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SCALANCE
- 6GK5208-0BA00-2AC2
In Stock
Fast Shipping Available
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Managed Fast Ethernet connections for automation networks
Siemens 6GK5208-0BA00-2AC2 is the SCALANCE XC208 managed Layer 2 Industrial Ethernet switch with eight 10/100 Mbit/s RJ45 ports. It connects automation devices within a configured network and provides a console interface, diagnostic indications and support for redundant DC power connections.
The switch supports industrial network integration using functions such as VLAN and RSTP, with PROFINET IO device capability. Select the correct topology, security configuration, cabling and mounting arrangement for the installation. This exact variant is a Fast Ethernet device, not a Gigabit or PoE model.
The switch supports industrial network integration using functions such as VLAN and RSTP, with PROFINET IO device capability. Select the correct topology, security configuration, cabling and mounting arrangement for the installation. This exact variant is a Fast Ethernet device, not a Gigabit or PoE model.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Managed network connections across industrial automation
Siemens identifies manufacturing, automotive and food-processing networks as X-200 application fields. The examples below describe suitable network roles, subject to engineering checks; they do not claim verified installation of this order code at a named factory.
-
01 · MACHINE AUTOMATION
Connecting controllers and local automation devices
Within a machine control network, the XC208 provides managed copper Ethernet connections between compatible controllers, operator panels and distributed devices. Its eight Fast Ethernet ports must be sized against the required traffic, while network configuration and diagnostics support commissioning and fault location. -
02 · AUTOMOTIVE PRODUCTION
Separating communication within a production cell
In an engineered production-cell network, VLAN configuration can separate selected traffic groups while managed switching connects the relevant automation equipment. The plant network design must define permitted paths, redundancy and security; this switch is not a substitute for a firewall or machine safety system. -
03 · FOOD PROCESSING AUTOMATION
Linking enclosed process-control equipment
Inside an appropriate control enclosure, the switch can link compatible process controllers and field-network equipment in a food-processing installation. Its IP20 construction requires environmental protection; redundant DC connections and network diagnostics can support the engineered availability strategy without implying cabinet-free washdown suitability.
Technical specifications for 6GK5208-0BA00-2AC2
-
Product Model6GK5208-0BA00-2AC2
-
Product ParametersManaged Industrial Ethernet Switch
-
In stock1 unit
-
ManufacturerSiemens
-
Ethernet ports8 RJ45 ports, 10/100 Mbit/s
-
Switching methodLayer 2, store-and-forward
-
Console interface1 RJ11 port
-
Supply voltage12-24 V DC nominal; permitted 9.6-31.2 V DC
-
Supply redundancyTwo DC inputs; the higher-voltage source carries the load
-
Power consumption4.2 W
-
Signaling contact rating24 V DC maximum, 100 mA maximum
-
Operating ambient temperature-40 to +70 C up to 2000 m altitude
-
Storage and transport temperature-40 to +85 C
-
Degree of protectionIP20
-
Mounting optionsWall, DIN rail, S7-300 rail or S7-1500 rail; application restrictions apply
-
MAC address table8192 entries
-
QoS priority queues4
-
Network management functionsVLAN and RSTP; PROFINET IO device integration
View all additional
Alternative Names
6GK52080BA002AC2
SCALANCE XC208
XC208 managed Ethernet switch
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SCALANCE XC-200 / INDUSTRIAL ETHERNET
Integrate the managed switch into the engineered network topology
Use the eight Fast Ethernet ports to connect compatible automation devices within the approved network design. Check required traffic and port allocation; this XC208 order code does not provide the Gigabit or PoE functions of other family members.
Configure the required addressing, VLAN and redundancy functions in accordance with the network plan. PROFINET integration and diagnostic use require the correct project and firmware support; they are not established simply by connecting Ethernet cables.
Both DC inputs and any signaling-contact connection must meet the manual ratings. Provide a suitable enclosure, installation method and protective measures, and maintain an industrial security concept for management access and connected network paths.
Features:
- Exact article: 6GK5208-0BA00-2AC2
- Check 10/100 Mbit/s bandwidth against network demand
- Plan topology, redundancy and security configuration
The Siemens 6GK5208-0BA00-2AC2 XC208 managed Industrial Ethernet switch requires port bandwidth, DC supply, firmware, topology and network configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match 6GK5208-0BA00-2AC2, including the final suffix, rather than substituting a similarly numbered XB or XC switch. Compare physical ports, power requirements, protocols and supported network functions before approving an alternative.
Preserve the installed network configuration and document port assignments before replacement. Isolate affected equipment as required, then restore the approved addressing, VLAN, redundancy and diagnostic settings under a controlled maintenance plan.
The reviewed official record identifies the XC208 product as active; no unverified successor is proposed. Confirm the current firmware and security guidance, and test communication and fault signaling before restoring production network service.
Features:
- Match the complete 6GK5208-0BA00-2AC2 article
- Match the complete 2AC2 order-code suffix
- Verify supply, enclosure and mounting conditions
The Siemens 6GK5208-0BA00-2AC2 XC208 managed Industrial Ethernet switch requires replacement verification against port bandwidth, DC supply, firmware, topology and network configuration before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon reference PDFs are prepared from Siemens documentation; the manual package retains the selected original Siemens pages. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Three model-specific PDF previews are available
- Engineering software, licenses and project backups remain the customer's responsibility
- Accessories are supplied only when listed in the quotation
Documentation for the Siemens 6GK5208-0BA00-2AC2 XC208 managed Industrial Ethernet switch must match the installed article and applicable version; check document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size60 x 125 x 147 mm (Siemens packaging)
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85176200; verify locally
-
OriginGermany; confirm label
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GK5208-0BA00-2AC2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Are the eight RJ45 ports Gigabit or PoE ports?
No. The exact XC208 order code provides eight 10/100 Mbit/s RJ45 ports. Gigabit and PoE capabilities described elsewhere in the broader XC-200 portfolio must not be assigned to this variant. -
Can the switch operate from two separate DC supplies?
Yes. It supports redundant DC inputs. The manual states that the supply with the higher output voltage powers the device alone; the two sources do not share the load. Both supplies and their combination must meet the documented safety requirements. -
Is 24 V AC acceptable at the power connector?
No. The documented supply is DC, nominally 12-24 V, with a permitted range of 9.6-31.2 V. Siemens expressly prohibits operation with AC at this connector. -
Can it be installed outside a control cabinet?
Do not treat it as a sealed field switch. The XC208 has IP20 protection and requires an installation environment meeting the manual's enclosure, access and ambient-condition requirements. Choose a suitably protected arrangement for dust, moisture or washdown exposure. -
What does the signaling contact do during a fault?
The floating contact opens to indicate a configured error state and is closed during normal operation. Respect the device operating voltage and the 100 mA maximum contact load, and configure the required monitored conditions. -
Is DIN-rail mounting suitable for severe vibration?
Siemens warns that a 35 mm DIN rail is not adequate in shipbuilding or under extreme vibration above 10 g. The manual specifies S7 standard-rail mounting for those conditions; select the mounting method for the actual environment. -
Can it be monitored as part of a PROFINET system?
The exact product record identifies PROFINET IO device capability. Configure the network and engineering project for that role, and verify firmware and device-description compatibility rather than assuming network diagnostics work without configuration. -
Does managed switching remove the need for network security controls?
No. Siemens requires a maintained industrial security concept. Limit access, use appropriate secure configuration and network segmentation, and follow current firmware and security guidance; the switch is only one component of the complete protection strategy.
READY TO VERIFY YOUR PART?
Get a 6GK5208-0BA00-2AC2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
