PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SCALANCE
- 6GK5216-0BA00-2AC2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GK5216-0BA00-2AC2 managed Industrial Ethernet switch
Siemens 6GK5216-0BA00-2AC2 SCALANCE XC216 managed Layer 2 Industrial Ethernet switch connects sixteen 10/100 Mbit/s copper network devices. Its compact IP20 housing integrates redundant 24 V DC supply inputs, a signaling contact, an RJ11 console interface, diagnostic LEDs and a C-PLUG slot.
The switch forwards production-network traffic while supporting PROFINET diagnostics, EtherNet/IP communication, VLAN functions and ring redundancy. This architecture links controllers, distributed I/O, operator stations and field devices while preserving managed segmentation and network availability.
The switch forwards production-network traffic while supporting PROFINET diagnostics, EtherNet/IP communication, VLAN functions and ring redundancy. This architecture links controllers, distributed I/O, operator stations and field devices while preserving managed segmentation and network availability.
BEFORE YOU BUY
Confirm the complete SCALANCE XC216
ACTUAL APPLICATIONS
Industrial Network Roles for SCALANCE XC216
Official SCALANCE references support managed industrial networking across production cells, process lines, and distributed control cabinets.
-
01 · AUTOMOTIVE
Press Shop Controllers and Field Device Networks
Production communication and monitoringPress conveyor coordinationStamping sensor monitoring -
02 · FOOD & BEVERAGE
Brewing Filling and Packaging Production Lines
Process data and line coordinationFermentation tank monitoringBottling line synchronization -
03 · GENERAL MANUFACTURING
Distributed Cabinets and Production Network Backbones
Field connectivity and network availabilityExtrusion press networkingConveyor line failover
Technical specifications for 6GK5216-0BA00-2AC2
-
Product Model6GK5216-0BA00-2AC2
-
Product Parametersmanaged Industrial Ethernet switch
-
In stock1 unit
-
ManufacturerSiemens
-
Electrical Ports16 × RJ45
-
Transfer Rates10 and 100 Mbit/s
-
Console Interface1 × RJ11
-
Rated Supply24 V DC
-
Supply Range9.6–31.2 V DC
-
Rated Current275 mA at 24 V DC
-
Power Loss6.6 W
-
Signaling Contact24 V DC, 100 mA maximum
-
Operating Temperature-40 to +70 °C
-
Storage Temperature-40 to +85 °C
-
Relative Humidity95% at 25 °C, non-condensing
-
Protection DegreeIP20
-
Maximum Frame Length1632 bytes
-
VLAN Capacity257
-
MTBF>48 years
View all additional
Alternative Names
6GK5216 0BA00 2AC2
SCALANCE XC216 managed switch
Siemens XC216 Industrial Ethernet switch
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6GK5216-0BA00-2AC2 to the installed SCALANCE network
Siemens 6GK5216-0BA00-2AC2 SCALANCE XC216 provides sixteen 10/100 Mbit/s RJ45 ports for managed Layer 2 Industrial Ethernet networks. Redundant 24 V DC inputs, the signaling contact and C-PLUG slot support cabinet integration and controlled configuration storage.
Confirm the 9.6–31.2 V DC supply range, protective grounding, 100 mm convection clearances and selected DIN rail, S7 rail or wall mounting method. Match port assignments, VLANs, PROFINET device settings, EtherNet/IP communication and ring-redundancy roles to the approved network design.
Commission through the documented management interface, verify both supply paths and fault signaling, then test link status, diagnostics and each required redundancy transition. Archive the final configuration and acceptance results with the network record.
Features:
- Exact identity: 6GK5216-0BA00-2AC2
- Ports: 16 × 10/100 Mbit/s RJ45
- Environment: -40 to +70 °C, IP20
The Siemens 6GK5216-0BA00-2AC2 requires documented system integration before energising the network equipment.
REPLACEMENT CONTROL
Verify the complete 6GK5216-0BA00-2AC2 identity before exchange
Replace 6GK5216-0BA00-2AC2 only after matching the full order code, SCALANCE XC216 designation, enclosure format and installed firmware baseline. A similar port count does not establish functional interchangeability.
Photograph the terminal blocks, grounding point, signaling contact, C-PLUG, RJ45 assignments and management labels. Export the controlled switch configuration and record ring, VLAN, PROFINET and EtherNet/IP settings before removal.
After fitting the verified switch, restore the approved configuration and confirm both power inputs, signaling contact, management access, port links, diagnostic LEDs and every required redundancy path before release.
Features:
- Exact identity: 6GK5216-0BA00-2AC2
- Product class: managed Layer 2 switch
- Configuration: preserve C-PLUG and network settings
The Siemens 6GK5216-0BA00-2AC2 requires documented replacement verification before energising the network equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6GK5216-0BA00-2AC2
- Siemens SCALANCE XC-200 instructions attached
- Exact switch identity required before installation
Documentation for Siemens 6GK5216-0BA00-2AC2 must match the SCALANCE XC216 hardware and controlled network configuration; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size14.0 × 12.5 × 15.0 cm
-
Shipping weight0.80 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85176200
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GK5216-0BA00-2AC2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How many copper Ethernet ports does the SCALANCE XC216 provide?
The switch provides sixteen RJ45 ports, each supporting 10 and 100 Mbit/s Industrial Ethernet communication. -
Which power supply must be prepared for this switch?
Prepare a 24 V DC supply within the documented 9.6–31.2 V DC range and wire the redundant input path according to the Siemens instructions. -
Can this article operate in low-temperature outdoor cabinets?
Its documented operating range is -40 to +70 °C, but the IP20 enclosure still requires a suitable protected cabinet and controlled environmental design. -
Which mounting arrangements are approved for the XC216?
Siemens documents wall mounting, a 35 mm DIN rail, an S7-300 standard rail and an S7-1500 standard rail. -
Does the switch support PROFINET diagnostics?
Yes. The product operates as a PROFINET IO device and supports PROFINET diagnostics with conformity class B. -
How is the saved configuration transferred during replacement?
Record the controlled configuration and verify the C-PLUG before removal; restore only the approved settings to the exact replacement article. -
Which checks are required before reconnecting the network?
Verify grounding, both power inputs, the signaling contact, port assignments, VLANs, management access and every required redundancy path. -
What details should distributors confirm for a quotation?
Provide the complete 6GK5216-0BA00-2AC2 order code, required quantity, delivery destination and any requested documentation or testing records.
READY TO VERIFY YOUR PART?
Get a 6GK5216-0BA00-2AC2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
