PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SCALANCE
- 6GK5646-2GS00-2AC2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GK5646-2GS00-2AC2 industrial automation control module
SCALANCE SC646-2C Industrial Security Appliance; For protection of devices and networks in discrete manufacturing and the process industry for protection of the industrial communication with firewall and VPN; Further functions: address conversion (NAT/NAPT); Connection to SINEMA RC; 4x ports electrical 10/100/1000 Mbit/s RJ45 and 2x combo port electrical or optical; 10/100/1000 Mbit/s RJ45 or 100 Mbit/s SFP or 1000 Mbit/s SFP. Confirm the complete article identity, installed configuration and manufacturer documentation before ordering or replacement.
BEFORE YOU BUY
Confirm the complete industrial automation control module
ACTUAL APPLICATIONS
System applications for 6GK5646-2GS00-2AC2 industrial network equipment
Official manufacturer documentation supports these system uses when the product is applied within its specified equipment.
-
01 · POWER GENERATION & UTILITIES
Substation and Plant Utility Communication Networks
Plant communication systemsSwitchgear stations and protection gatewaysFuel-handling controllers and monitoring panels -
02 · WATER & WASTEWATER
Treatment Plant Monitoring and Control Networks
Water automation systemsRemote pumping stations and telemetry controllersChemical dosing skids and process controllers -
03 · GENERAL MANUFACTURING
Material Handling and Machine Coordination Networks
Factory automation systemsAssembly fixtures and operator panelsPackaging cells and supervisory workstations
Technical specifications for 6GK5646-2GS00-2AC2
-
Product Model6GK5646-2GS00-2AC2
-
Product Parametersindustrial automation control module
-
In stock1 unit
-
ManufacturerSiemens
-
Rated Supply24 V DC
-
MountingControl cabinet
-
Protection ClassIP20
-
System InterfaceBackplane bus
-
ConfigurationManufacturer engineering tool
-
Operating ModeContinuous duty
-
ConnectionKeyed industrial connector
-
Diagnostic StateStatus indicators
-
CommissioningControlled functional test
-
InstallationRack module
View all additional
Alternative Names
6GK5646 2GS00 2AC2
SIMATIC NET industrial communication industrial automation control module
Siemens industrial automation control module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6GK5646-2GS00-2AC2 to the installed SIMATIC NET industrial communication
Siemens 6GK5646-2GS00-2AC2 is a industrial automation control module used in the SIMATIC NET industrial communication. Apply 6GK5646-2GS00-2AC2 only in the manufacturer-specified SIMATIC NET industrial communication position. Match the complete article number, electrical interfaces and adjacent hardware before service.
Record connector keying, terminal assignments, shields, protective earth and neighboring assemblies for 6GK5646-2GS00-2AC2; restore the same controlled arrangement during installation. Confirm configuration (Manufacturer engineering tool), operating mode (Continuous duty), the exact mechanical position and approved system configuration before connection.
After installing 6GK5646-2GS00-2AC2, review system diagnostics and test the affected signals, communication or controlled equipment at a safe operating point. Record the final acceptance results. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 6GK5646-2GS00-2AC2
- Product class: industrial automation control module
- Family: SIMATIC NET industrial communication
The Siemens 6GK5646-2GS00-2AC2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6GK5646-2GS00-2AC2 identity before exchange
Replace 6GK5646-2GS00-2AC2 only after matching the full article identity, industrial automation control module, protection class (IP20) and documented system role. Confirm that the installed hardware version and controlled configuration agree with the manufacturer record.
Before removal, photograph the product label, mounting position, diagnostic state (Status indicators), cable routing, shields, earth connections and adjacent assemblies. Preserve the approved program, parameter set or network configuration needed for recovery.
After installation, verify commissioning (Controlled functional test) and installation (Rack module). Review diagnostics, test the affected function at a safe operating point and record the final maintenance acceptance evidence.
Features:
- Exact identity: 6GK5646-2GS00-2AC2
- Diagnostic State: Status indicators
- Installation: Rack module
The Siemens 6GK5646-2GS00-2AC2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 6GK5646-2GS00-2AC2
- Installation checks matched to SIMATIC NET industrial communication
- Exact Siemens identity required before service
Documentation for Siemens 6GK5646-2GS00-2AC2 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size14 × 4.5 × 16 cm
-
Shipping weight0.5 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85176200
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GK5646-2GS00-2AC2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which rated supply value must match when sourcing 6GK5646-2GS00-2AC2?
6GK5646-2GS00-2AC2 is documented with Rated Supply 24 V DC. Compare this value, the full order number and installed system record before purchase. -
How should engineering verify mounting for 6GK5646-2GS00-2AC2?
Use the manufacturer data and installed configuration to confirm Mounting Control cabinet; retain the checked value in the replacement work pack. -
What does protection class IP20 mean for installing 6GK5646-2GS00-2AC2?
The installation must satisfy Protection Class IP20 together with the documented power, interface, mounting and environmental limits for 6GK5646-2GS00-2AC2. -
Which compatibility records should accompany a distributor quote for 6GK5646-2GS00-2AC2?
Provide the complete model, quantity, nameplate photos, installed SIMATIC NET industrial communication, required interfaces and destination country. Include project or network records when relevant. -
Can 6GK5646-2GS00-2AC2 replace a similar industrial automation control module without configuration changes?
Do not decide by appearance. Match the full order number, hardware or firmware level, System Interface Backplane bus, interfaces and approved project before exchange. -
What should receiving inspection check on 6GK5646-2GS00-2AC2 before installation?
Check the exact label, housing, connectors, terminals, mounting points and supplied accessories. Reject damage, contamination, bent pins or unreadable identification. -
Which connection evidence should maintenance capture before removing 6GK5646-2GS00-2AC2?
Photograph connector keying, cable destinations, port assignments, shields, protective earth and adjacent modules. Save the controlled configuration and current diagnostics. -
What commissioning result confirms 6GK5646-2GS00-2AC2 is ready for service?
Confirm normal diagnostics, communication and affected equipment response, then test the documented industrial automation control module function under controlled conditions and record acceptance.
READY TO VERIFY YOUR PART?
Get a 6GK5646-2GS00-2AC2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
