PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SENTRON
- 7KM9300-0AE01-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
7KM9300-0AE01-0AA0 SENTRON switched Ethernet PROFINET module
The Siemens 7KM9300-0AE01-0AA0 is a plug in switched Ethernet PROFINET expansion module for compatible SENTRON PAC meters and 3VA communication units. Two RJ45 ports provide an integrated network path that supports line and switched Ethernet topologies without a separate local switch.
Power is supplied by the host instrument, allowing the module to extend the meter or communication unit with PROFINET data exchange while preserving galvanic separation at the network interface. It is intended for energy transparency and power distribution systems that bring electrical measurements into an industrial Ethernet automation environment.
Power is supplied by the host instrument, allowing the module to extend the meter or communication unit with PROFINET data exchange while preserving galvanic separation at the network interface. It is intended for energy transparency and power distribution systems that bring electrical measurements into an industrial Ethernet automation environment.
BEFORE YOU BUY
Confirm the complete SENTRON switched Ethernet PROFINET module
ACTUAL APPLICATIONS
Application fields for 7KM9300-0AE01-0AA0
7KM9300-0AE01-0AA0 is used across compatible installations in the following broad industrial application fields, subject to verified system design and operating requirements.
-
01 · POWER GENERATION
Thermal, Hydroelectric and Renewable Power Generation
Thermal and hydroelectric power productionRenewable generation and energy integration -
02 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Continuous Production
Discrete manufacturing and assembly productionContinuous industrial production operations -
03 · COMMERCIAL BUILDINGS
Commercial and Institutional Building Operations
Commercial property operationsInstitutional facility services
Technical specifications for 7KM9300-0AE01-0AA0
-
Product Model7KM9300-0AE01-0AA0
-
Product ParametersSENTRON switched Ethernet PROFINET module
-
In stock1 unit
-
ManufacturerSiemens
-
Product designationSwitched Ethernet PROFINET expansion module
-
Compatible metersSENTRON PAC3200 and PAC4200
-
Compatible communication units3VA COM100 and COM800
-
Network protocolPROFINET
-
Ethernet ports2 RJ45 sockets
-
Supply methodVia host device
-
Galvanic isolation500 V AC maximum
-
Protection classIP20
-
Flammability classUL 94 V 0
-
Pollution degree2
-
Mounting methodPlug in
-
Operating temperature minimum−5 °C
-
Operating temperature maximum55 °C
-
Storage temperature minimum−25 °C
-
Storage temperature maximum70 °C
View all additional
Alternative Names
Siemens SENTRON switched Ethernet PROFINET module
SENTRON PAC and 3VA communication
SENTRON switched Ethernet PROFINET module for SENTRON PAC and 3VA communication
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 7KM9300-0AE01-0AA0 SENTRON switched Ethernet PROFINET module
7KM9300-0AE01-0AA0 is integrated in the SENTRON PAC and 3VA communication architecture as the plug in PROFINET communication expansion for compatible SENTRON PAC meters and 3VA communication units. The manufacturer documentation treats this function as part of the complete station or drive arrangement, so its behavior depends on the associated host hardware, approved module sequence and project configuration rather than the article operating as an independent device.
The integration design must coordinate host device compatibility, the two port Ethernet topology, device naming, network addressing and the automation controller data record configuration. Connector coding, conductor identification, shielding, grounding and mechanical seating should follow the applicable manufacturer drawings so that the installed assembly retains the electrical separation, signal integrity and service access intended for the platform.
Commissioning should assign the documented PROFINET identity, establish cyclic communication and compare transmitted measurements, status and diagnostics with the values shown by the host device. The observed device status, controller diagnostics and functional response should be compared with the saved project and manufacturer sequence before the installation is released for normal service, with any unexpected indication resolved at the relevant station, channel or network level.
Features:
- Exact identity: 7KM9300-0AE01-0AA0
- Family: SENTRON PAC and 3VA communication
- Documented integration and testing
7KM9300-0AE01-0AA0 requires documented system integration before energising the installation.
INTERCHANGEABILITY
Verify 7KM9300-0AE01-0AA0 before replacement
Replacement selection for 7KM9300-0AE01-0AA0 must be based on the complete article identity and its documented role as the plug in PROFINET communication expansion for compatible SENTRON PAC meters and 3VA communication units. A component from the same SENTRON PAC and 3VA communication family can have a similar enclosure while using a different electrical interface, terminal arrangement, firmware level or supported host, so family resemblance alone does not establish interchangeability.
Before removal, record the installed position and all details associated with host device compatibility, the two port Ethernet topology, device naming, network addressing and the automation controller data record configuration. Preserve the controller or drive project, diagnostic state, cable labels, connector orientation and any licensed or stored configuration that belongs to the original assembly, because these records provide the reference for rebuilding the documented system relationship.
After the replacement is fitted, assign the documented PROFINET identity, establish cyclic communication and compare transmitted measurements, status and diagnostics with the values shown by the host device. Final acceptance should include a comparison of indications, diagnostics and controlled functional behavior with the earlier records and the manufacturer documentation, confirming that no adjacent module, field circuit, communication path or configured function was unintentionally changed.
Features:
- Match 7KM9300-0AE01-0AA0 exactly
- Record connections and settings before removal
- Complete controlled post-installation tests
7KM9300-0AE01-0AA0 requires replacement verification against the installed hardware and configuration.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Match documents to the complete product identity
- Use the applicable manufacturer family instructions
- Additional documents are supplied only when quoted
Documentation for 7KM9300-0AE01-0AA0 must be checked against the installed configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size4.3 × 6.3 × 2.2 cm
-
Net weight0.09 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8517623990
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 7KM9300-0AE01-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is 7KM9300-0AE01-0AA0?
7KM9300-0AE01-0AA0 is a SENTRON switched Ethernet PROFINET module for the SENTRON PAC and 3VA communication. -
Which identity must be used when ordering 7KM9300-0AE01-0AA0?
Use the complete 7KM9300-0AE01-0AA0 marking and compare it with the installed label and project records. -
Can a similar family item replace 7KM9300-0AE01-0AA0?
Do not confirm substitution from a family name or similar appearance. Verify the complete code, interfaces, revision and approved configuration. -
What should be recorded before removing 7KM9300-0AE01-0AA0?
Record the installed position, connections, cable labels, settings and diagnostic state. -
What should be inspected when 7KM9300-0AE01-0AA0 arrives?
Inspect the label, housing, connectors, terminals and packaging for correct identity and condition. -
Which checks follow installation?
Restore the approved configuration and complete controlled power-up, diagnostic and functional tests. -
What information should accompany a quotation?
Provide the complete model, quantity, clear label photographs, destination and required delivery date. -
Which documentation applies?
Use the manufacturer documentation for SENTRON PAC and 3VA communication and confirm that its scope covers the installed configuration.
READY TO VERIFY YOUR PART?
Get a 7KM9300-0AE01-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
