PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMODRIVE
- 6SN1118-0DM31-0AA2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SN1118-0DM31-0AA2 SIMODRIVE axis control board
Siemens 6SN1118-0DM31-0AA2 is a SIMODRIVE axis control board used in the SIMODRIVE 611 drive systems. It regulates motor current, speed and position for one machine axis and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC control class, Axis-defined motor rating, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC control class, Axis-defined motor rating, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete SIMODRIVE axis control board
ACTUAL APPLICATIONS
Application context for 6SN1118-0DM31-0AA2
Manufacturer documentation places the Simodrive Axis Control Board in practical drive applications. The three cases below describe different operating tasks in which 6SN1118-0DM31-0AA2 performs its documented product-family role with the configured companion equipment.
-
01 · PULP & PAPER
Sequence stock preparation with Simodrive Axis
Across the pulp chests and refiners, 6SN1118-0DM31-0AA2 provides its specified system function as a Simodrive Axis Control Board. During grade change, the system uses this function to coordinate flow, consistency and equipment permissives, helping it deliver stable stock to the machine. -
02 · PLASTICS & PACKAGING
Align web transport with Simodrive Axis process control
Across the unwinders, dancers and pull rolls, 6SN1118-0DM31-0AA2 serves its documented function as a Simodrive Axis Control Board. During format change, the system uses this function to synchronize the driven sections with product position, helping it protect web tension and print registration. -
03 · MINING & METALS
Synchronize strip transport with Simodrive Axis
During operation of the bridle rolls and coilers, 6SN1118-0DM31-0AA2 operates in its approved product-family role as a Simodrive Axis Control Board. During threading, the system uses this function to balance speed and torque between connected sections, helping it maintain strip tension through the line.
Technical specifications for 6SN1118-0DM31-0AA2
-
Product Model6SN1118-0DM31-0AA2
-
Product ParametersSIMODRIVE axis control board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassSIMODRIVE axis control board
-
Drive FamilySIMODRIVE 611 drive systems
-
Primary FunctionRegulates motor current, speed and position for one machine axis
-
Power ArchitectureDigital closed-loop control
-
Voltage Class24 V DC control class
-
Current RatingAxis-defined motor rating
-
Power Section611 axis control section
-
Mechanical DesignPlug-in control board
-
Electrical InterfaceEncoder, enable and setpoint interfaces
-
Commissioning CheckRestore axis data and test feedback direction
View all additional
Alternative Names
6SN1118 0DM31 0AA2
SIMODRIVE 611 drive systems SIMODRIVE axis control board
Siemens 611 axis control board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SN1118-0DM31-0AA2 to the installed SIMODRIVE 611 drive systems
Siemens 6SN1118-0DM31-0AA2 is a SIMODRIVE axis control board used in the SIMODRIVE 611 drive systems to regulate motor current, speed and position for one machine axis. Its digital closed-loop control role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC control class, Axis-defined motor rating, the 611 axis control section, plug-in control board and encoder, enable and setpoint interfaces. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete restore axis data and test feedback direction, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SN1118-0DM31-0AA2
- Function: Regulates motor current, speed and position for one machine axis
- Family: SIMODRIVE 611 drive systems
The Siemens 6SN1118-0DM31-0AA2 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SN1118-0DM31-0AA2 identity before exchange
Treat 6SN1118-0DM31-0AA2 as a configuration-specific SIMODRIVE axis control board for the SIMODRIVE 611 drive systems. Match the complete Siemens article number, installed 611 axis control section, board or module revision, mechanical design and approved replacement record before removal.
Photograph encoder, enable and setpoint interfaces, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in control board and any cooling or discharge provisions while the drive is isolated.
After installation, restore axis data and test feedback direction. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SN1118-0DM31-0AA2
- Installed section: 611 axis control section
- Release check: Restore axis data and test feedback direction
The Siemens 6SN1118-0DM31-0AA2 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SN1118-0DM31-0AA2
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SN1118-0DM31-0AA2 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 20 × 5 cm
-
Shipping weight0.6 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SN1118-0DM31-0AA2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is the operating scope of 6SN1118-0DM31-0AA2 for axis loop regulation in SIMODRIVE 611 drive systems?
Use 6SN1118-0DM31-0AA2 only for regulates motor current, speed and position for one machine axis in the documented SIMODRIVE 611 drive systems. Engineering must confirm the installed 611 axis control section, 24 V DC control class and controlled drawing before work. -
Which measurements help diagnose encoder feedback path faults around the 611 axis control board?
For 6SN1118-0DM31-0AA2, review drive alarms, DC-link or supply readings, command status, encoder, enable and setpoint interfaces and the physical condition of the 611 axis control board. Compare results with a known-good channel where the site procedure permits. -
What must engineers capture before removing 6SN1118-0DM31-0AA2 from the 611 axis control section?
Before removing 6SN1118-0DM31-0AA2, save parameters where applicable and photograph the plug-in control board, connector keys, cable labels, shield and protective-earth routes, adjacent assemblies and full nameplate. -
Which post-replacement tests release the 611 axis control board back to service?
After installation, restore axis data and test feedback direction. Maintenance should then review diagnostics, prove the machine-axis commissioning under controlled conditions and record the final result before production release. -
Which configuration evidence confirms 6SN1118-0DM31-0AA2 as the correct 611 axis control board?
Match the complete 6SN1118-0DM31-0AA2 article, 611 axis control board, 24 V DC control class, Axis-defined motor rating, hardware suffix and installed SIMODRIVE 611 drive systems configuration. A similar appearance or shortened article number is insufficient. -
Which revision, condition and accessory details should a seller state for 6SN1118-0DM31-0AA2?
The offer for 6SN1118-0DM31-0AA2 should state label revision, new or surplus condition, visible inspection result and whether connectors, memory, software, manuals or other accessories are included. Unlisted accessories are excluded. -
What stock, dispatch and packing information does a buyer need for the 611 axis control board?
For 6SN1118-0DM31-0AA2, request confirmed stock status, dispatch time, ship-from location, packed size, shipping weight and courier options. The written quotation controls the final delivery terms. -
What paperwork should procurement request with the 611 axis control board?
A 6SN1118-0DM31-0AA2 quotation should identify the supplied Data Sheet and Installation Instructions, 12-month AMIKON warranty, HS reference, origin, return conditions and any document or licence limitations.
READY TO VERIFY YOUR PART?
Get a 6SN1118-0DM31-0AA2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
