PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOREG
- 6RX1700-0AK00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6RX1700-0AK00 CUD2 Terminal Expansion Module
Siemens 6RX1700-0AK00 is the CUD2 terminal expansion option for SIMOREG DC-MASTER 6RA70. It adds selectable analog inputs and outputs, additional binary connections, a motor-temperature sensor input and the third serial interface to the control arrangement. Siemens identifies the corresponding CUD2 board as C98043-A7006.
The two selectable analog inputs accept +/-10 V at 52 kohms and provide +/-10-bit resolution. The two analog outputs provide 0 to +/-10 V with a maximum 2 mA load and +/-11-bit resolution. The additional serial interface supports two-wire or four-wire RS485; the plug-in screw terminals accept conductors up to 1.5 mm2.
The two selectable analog inputs accept +/-10 V at 52 kohms and provide +/-10-bit resolution. The two analog outputs provide 0 to +/-10 V with a maximum 2 mA load and +/-11-bit resolution. The additional serial interface supports two-wire or four-wire RS485; the plug-in screw terminals accept conductors up to 1.5 mm2.
BEFORE YOU BUY
Confirm the complete 6RX1700-0AK00 identity
ACTUAL APPLICATIONS
Application fields for 6RX1700-0AK00
These broad application fields reflect the documented function and technical characteristics of 6RX1700-0AK00.
-
01 · OIL & GAS
Oil, Natural Gas and Renewable Energy
Oil and natural gas and renewable energyPetroleum and industrial thermal energy integration -
02 · WATER & WASTEWATER
Municipal Water and Environmental Treatment
Municipal water and environmental wastewater treatmentIndustrial water reclamation and municipal wastewater treatment -
03 · PHARMACEUTICALS
Pharmacy and Public Health
Pharmacy, healthcare and public healthGeneral pharmaceuticals and public healthcare
Technical specifications for 6RX1700-0AK00
-
Product Model6RX1700-0AK00
-
Product ParametersCUD2 Terminal Expansion Module
-
In stock1 unit
-
ManufacturerSiemens
-
Selectable analog inputs2
-
Analog input range+/-10 V
-
Analog input resistance52 kohms
-
Analog input resolution+/-10 bits
-
Analog common-mode allowance+/-15 V
-
Selectable analog outputs2
-
Analog output range0 to +/-10 V
-
Maximum analog output load2 mA
-
Analog output resolution+/-11 bits
-
Digital output channels2
-
Digital output current100 mA; short-circuit protected
-
Binary-input high level+13 to +33 V
-
Binary-input low level-33 to +3 V or open
-
Serial interface 3RS485; two-wire or four-wire
-
Maximum terminal conductor1.5 mm2
View all additional
Alternative Names
6RX1700-0AK00
SIMOREG DC-MASTER 6RA70
CUD2 Terminal Expansion Module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6RX1700-0AK00 within SIMOREG DC-MASTER 6RA70
Integrate CUD2 with the applicable 6RA70 control electronics and use the terminal-expansion function diagrams for the installed converter. Assign the selectable analog and binary connections in the drive parameters. This order code identifies the terminal-expansion option, rather than a converter program-memory module.
Wire the analog inputs and outputs to their X164 terminals with the documented reference connections. Match the +/-10 V ranges and keep analog output loading within 2 mA. Use shielded motor-temperature sensor wiring grounded as specified, and choose the sensor setting through the documented P490 index 2 arrangement.
Connect serial interface 3 at X162 for the intended two-wire or four-wire RS485 network. Set its baud rate with P803 and protocol with P800. The manual specifies 600 m at 187.5 kbaud or 1200 m at 93.75 kbaud, with data-reference potential limits that may require equipotential bonding.
Features:
- Selectable analog inputs: 2
- Analog input range: +/-10 V
- SIMOREG DC-MASTER 6RA70
Use 6RX1700-0AK00 only within the documented SIMOREG DC-MASTER 6RA70 arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace 6RX1700-0AK00 within SIMOREG DC-MASTER 6RA70
Back up the drive parameters and identify all CUD2 terminal connections before replacement. Record the 6RX1700-0AK00 option and C98043-A7006 board identity, together with the base converter. Retain analog scaling, selected binary functions, temperature-sensor configuration and serial interface 3 settings as separate project records.
Follow the SIMOREG isolation procedure before handling the control electronics or terminal plugs. Label X161, X162, X163 and X164 and inspect the reference-potential jumpers and shielding. Restore the documented terminal positions and do not exceed the 1.5 mm2 conductor limit or the applicable terminal ratings.
After replacement, check the analog values and output scaling, binary signals and motor-temperature reading in a controlled state. Re-establish the RS485 protocol and baud rate and confirm communication with the intended peer. Investigate F018 or A018 indications against the shared internal supply load limits before returning the converter to duty.
Features:
- 6RX1700-0AK00 complete order code
- Maximum terminal conductor: 1.5 mm2
- Retain the documented SIMOREG DC-MASTER 6RA70 connection arrangement
Use 6RX1700-0AK00 only within the documented SIMOREG DC-MASTER 6RA70 arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for 6RX1700-0AK00
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for 6RX1700-0AK00 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size1.30 x 12.50 x 26.40 cm
-
Net weight0.40 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504909000
-
OriginAustria
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6RX1700-0AK00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is 6RX1700-0AK00 a program-memory module?
No. Siemens identifies 6RX1700-0AK00 as the CUD2 terminal expansion option for SIMOREG DC-MASTER 6RA70. -
What analog input range does 6RX1700-0AK00 support?
6RX1700-0AK00 provides two selectable +/-10 V analog inputs with 52 kohm input resistance. -
What load can an analog output of 6RX1700-0AK00 drive?
6RX1700-0AK00 specifies up to 2 mA on its 0 to +/-10 V analog outputs. -
Which serial interface is added by 6RX1700-0AK00?
6RX1700-0AK00 provides serial interface 3, using RS485 in two-wire or four-wire form. -
Which parameters configure the serial port of 6RX1700-0AK00?
For 6RX1700-0AK00, the manual assigns baud rate to P803 and protocol to P800. -
What conductor limit applies to 6RX1700-0AK00 terminals?
6RX1700-0AK00 uses plug-in screw terminals with a maximum 1.5 mm2 connection cross-section. -
What should a distributor identify in an 6RX1700-0AK00 quotation?
Identify 6RX1700-0AK00 as the CUD2 expansion option and state whether its terminal plugs and mounting hardware are included. -
Which records help assess an 6RX1700-0AK00 replacement?
Provide the 6RX1700-0AK00 board identity, base converter code, terminal photographs and parameter backup, including analog scaling and serial settings.
READY TO VERIFY YOUR PART?
Get a 6RX1700-0AK00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6RX1700-0AK00CUD2 Terminal Expansion ModuleManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
