PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOREG
- 6RY1701-0AA04
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6RY1701-0AA04 DC drive control module
Siemens 6RY1701-0AA04 is a DC drive control module for the SIMOREG DC converter systems. It is used to processes regulator commands and feedback. Confirm the exact article, electrical class, interfaces, companion hardware and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete DC drive control module
ACTUAL APPLICATIONS
Application context for 6RY1701-0AA04
Manufacturer documentation places the Dc Drive Control Module in practical drive applications. The three cases below describe different operating tasks in which 6RY1701-0AA04 performs its documented product-family role with the configured companion equipment.
-
01 · PULP & PAPER
Protect dryer-section control with Dc Drive process control
At the control layer of the steam groups and dryer drives, 6RY1701-0AA04 operates in its approved product-family role as a Dc Drive Control Module. During moisture correction, the system uses this function to align thermal and drive response with the running sheet, helping it support the target moisture profile. -
02 · PLASTICS & PACKAGING
Synchronize carton forming with Dc Drive process control
Inside the blank feeders and folding stations, 6RY1701-0AA04 performs its assigned control role as a Dc Drive Control Module. During registration correction, the system uses this function to apply the selected format to the machine sequence, helping it produce the intended package geometry. -
03 · MACHINERY MANUFACTURING
Stabilize press sequencing with Dc Drive process control
At the control layer of the feed systems, dies and safety interfaces, 6RY1701-0AA04 supports the configured automation role as a Dc Drive Control Module. During part change, the system uses this function to apply the selected product recipe to the sequence, helping it produce the intended part without skipping an interlock.
Technical specifications for 6RY1701-0AA04
-
Product Model6RY1701-0AA04
-
Product ParametersDC drive control module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassDC drive control module
-
Drive FamilySIMOREG DC converter systems
-
Primary FunctionProcesses regulator commands and feedback
-
Power ArchitectureDigital converter electronics
-
Voltage ClassDC-drive control class
-
Current RatingRegulator signal channels
-
Control Supply24 V DC control class
-
Power SectionCentral regulator section
-
Mechanical DesignPlug-in service assembly
-
Electrical InterfaceControl, feedback and firing plugs
-
Cooling IntegrationCabinet cooling arrangement
-
Board Designation6RY1701-0AA04 assembly
-
Service RoleSiemens service component
-
Product StatusVerify installed revision
-
Commissioning CheckRun diagnostics and functional test
View all additional
Alternative Names
6RY1701 0AA04
SIMOREG DC converter systems DC drive control module
Siemens DC drive control module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6RY1701-0AA04 to the installed SIMOREG DC converter systems
Siemens 6RY1701-0AA04 is a DC drive control module used in the SIMOREG DC converter systems to process regulator commands and feedback. Its digital converter electronics architecture must match the documented drive configuration, controlled hardware arrangement and assigned central regulator section.
Before integration, confirm the dc-drive control class, regulator signal channels and 24 v dc control class. Compare the complete article, plug-in service assembly and control, feedback and firing plugs with the installed equipment, cable schedule and the technical data recorded in the product PDF.
Maintain the documented cabinet cooling arrangement, isolate all hazardous energy and apply ESD protection before handling the component. Complete the specified action to run diagnostics and functional test, then review Siemens diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6RY1701-0AA04
- Operating role: Processes regulator commands and feedback
- Connection class: Control, feedback and firing plugs
The Siemens 6RY1701-0AA04 requires documented system integration for its central regulator section, with the final run diagnostics and functional test result recorded before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6RY1701-0AA04 configuration before exchange
Treat 6RY1701-0AA04 as a configuration-specific DC drive control module for the SIMOREG DC converter systems. Match the complete Siemens article identity, 6RY1701-0AA04 assembly, installed hardware revision, siemens service component and documented central regulator section before removing the original component.
Photograph the plug-in service assembly, control, feedback and firing plugs, cable labels, shielding, protective-earth points and adjacent assemblies. Record the dc-drive control class, regulator signal channels and 24 v dc control class so the replacement can be checked against the controlled drive documentation.
After installation, run diagnostics and functional test. Restore only the approved project data and interface assignments, review power-stage or controller diagnostics, test the control or power path associated with processes regulator commands and feedback at a controlled operating point and retain the measured results in the maintenance record.
Features:
- Article and board: 6RY1701-0AA04 assembly
- Interface record: Control, feedback and firing plugs
- Release test: Run diagnostics and functional test
The Siemens 6RY1701-0AA04 requires documented replacement verification for its central regulator section, with the final run diagnostics and functional test result recorded before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6RY1701-0AA04
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6RY1701-0AA04 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26 × 23 × 3.5 cm
-
Shipping weight0.7 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6RY1701-0AA04
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function makes the 0AA04 regulator module model-specific?
The 0AA04 regulator module is used in the documented SIMOREG DC converter systems configuration for processes regulator commands and feedback. -
Why is DC-drive control class checked before exchange for the 0AA04 regulator module?
For the 0AA04 regulator module, match DC-drive control class and Regulator signal channels to the installed equipment nameplate. -
Which power architecture is involved for the 0AA04 regulator module?
The 0AA04 regulator module performs processes regulator commands and feedback through the digital converter electronics. -
What must match the 6RY1701-0AA04 label designation for the 0AA04 regulator module?
For the 0AA04 regulator module, record 6RY1701-0AA04 assembly together with the complete article and installed revision. -
How is damage at control, feedback and firing plugs detected for the 0AA04 regulator module?
On the 0AA04 regulator module, inspect control, feedback and firing plugs for keying, damage, contamination, routing and secure seating. -
Which 24 v dc control class condition is measured first for the 0AA04 regulator module?
Before energizing the 0AA04 regulator module, measure 24 v dc control class and confirm the documented polarity or phase condition. -
What prevents an incorrect replacement for the 0AA04 regulator module?
A 0AA04 regulator module replacement must match its electrical class, section role, companion hardware and mechanical interface. -
How is normal operation confirmed for the 0AA04 regulator module?
For the 0AA04 regulator module, run diagnostics and functional test; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6RY1701-0AA04 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
