PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOREG
- 6RY1803-0CA11
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6RY1803-0CA11 Field supply control board
Siemens 6RY1803-0CA11 is a Field supply control board used in the SIMOREG DC Master converters. It regulates the dc motor field supply and field-current feedback and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC control supply, Field-circuit defined current, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC control supply, Field-circuit defined current, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Field supply control board
ACTUAL APPLICATIONS
Application context for 6RY1803-0CA11
Manufacturer documentation places the Field Supply Control Board in practical drive applications. The three cases below describe different operating tasks in which 6RY1803-0CA11 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Maintain high-lift pump speed during demand increase
At the control layer of the pump motors, discharge headers and pressure loops, 6RY1803-0CA11 performs its assigned control role as a Field Supply Control Board. During demand increase, the system uses this function to adjust motor speed from the process demand signal, helping it maintain the required pressure with less throttling. -
02 · AUTOMOTIVE
Protect paint-shop conveying with Field Supply
At the control layer of the carrier tracking and booth interfaces, 6RY1803-0CA11 supports the configured automation role as a Field Supply Control Board. During carrier accumulation, the system uses this function to route carriers by production status, helping it preserve body order through the process. -
03 · MACHINERY MANUFACTURING
Monitor test-stand control with Field Supply process control
In the automation chain for the load actuators and measurement channels, 6RY1803-0CA11 operates in its approved product-family role as a Field Supply Control Board. During test-point transition, the system uses this function to move the test article through commanded operating points, helping it capture comparable results at each condition.
Technical specifications for 6RY1803-0CA11
-
Product Model6RY1803-0CA11
-
Product ParametersField supply control board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassField supply control board
-
Drive FamilySIMOREG DC Master converters
-
Primary FunctionRegulates the DC motor field supply and field-current feedback
-
Power ArchitectureField converter electronics
-
Voltage Class24 V DC control supply
-
Current RatingField-circuit defined current
-
Power SectionField supply section
-
Mechanical DesignPlug-in control board
-
Electrical InterfaceField firing and current-feedback plugs
-
Commissioning CheckVerify field polarity and current regulation
View all additional
Alternative Names
6RY1803 0CA11
SIMOREG DC Master converters Field supply control board
Siemens SIMOREG field board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6RY1803-0CA11 to the installed SIMOREG DC Master converters
Siemens 6RY1803-0CA11 is a Field supply control board used in the SIMOREG DC Master converters to regulate the DC motor field supply and field-current feedback. Its field converter electronics role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC control supply, Field-circuit defined current, the field supply section, plug-in control board and field firing and current-feedback plugs. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete verify field polarity and current regulation, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6RY1803-0CA11
- Function: Regulates the DC motor field supply and field-current feedback
- Family: SIMOREG DC Master converters
The Siemens 6RY1803-0CA11 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6RY1803-0CA11 identity before exchange
Treat 6RY1803-0CA11 as a configuration-specific Field supply control board for the SIMOREG DC Master converters. Match the complete Siemens article number, installed field supply section, board or module revision, mechanical design and approved replacement record before removal.
Photograph field firing and current-feedback plugs, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in control board and any cooling or discharge provisions while the drive is isolated.
After installation, verify field polarity and current regulation. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6RY1803-0CA11
- Installed section: Field supply section
- Release check: Verify field polarity and current regulation
The Siemens 6RY1803-0CA11 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6RY1803-0CA11
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6RY1803-0CA11 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 20 × 4 cm
-
Shipping weight0.55 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6RY1803-0CA11
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where is the field-current regulation function used?
6RY1803-0CA11 performs regulates the dc motor field supply and field-current feedback in the documented SIMOREG DC Master converters; first confirm the installed field supply section. -
Which electrical identity defines the SIMOREG field board?
Compare 6RY1803-0CA11, 24 V DC control supply, Field-circuit defined current and the installed drive nameplate with Siemens documentation. -
What must match before field polarity check work begins?
Confirm the plug-in control board, connector keys, controlled hardware position and complete 6RY1803-0CA11 suffix. -
Which connections belong to the SIMOREG field board?
Record field firing and current-feedback plugs, cable labels, grounding, adjacent assemblies and board orientation before removal. -
How should the field-current regulation assembly be isolated?
Apply site lockout, wait the specified discharge time, prove absence of voltage and use ESD controls before handling 6RY1803-0CA11. -
What receiving inspection applies to 6RY1803-0CA11?
Check the article label, suffix, connectors, coating, mechanical condition, contamination and protective packing. -
Which result completes the weak-field validation?
Verify field polarity and current regulation. Record diagnostics and the controlled functional test before release. -
What details are needed to quote the SIMOREG field board?
Send the full 6RY1803-0CA11 label, installed field supply section, interface photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a 6RY1803-0CA11 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
