PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOREG
- C98043-A1603-L11
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
C98043-A1603-L11 Gating circuit board
Siemens C98043-A1603-L11 is a Gating circuit board used in the SIMOREG 6RA24. It routes firing pulses to the converter thyristor bridges and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, Installed 6RA24 converter class, Converter-defined armature current, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, Installed 6RA24 converter class, Converter-defined armature current, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Gating circuit board
ACTUAL APPLICATIONS
Application context for C98043-A1603-L11
Manufacturer documentation places the Gating Circuit Board in practical drive applications. The three cases below describe different operating tasks in which C98043-A1603-L11 performs its documented product-family role with the configured companion equipment.
-
01 · MINING & METALS
Stabilize strip transport with Gating Circuit
During operation of the bridle rolls and coilers, C98043-A1603-L11 handles its designated signal or control duty as a Gating Circuit Board. During threading, the system uses this function to balance speed and torque between connected sections, helping it maintain strip tension through the line. -
02 · PULP & PAPER
Route stock preparation with Gating Circuit process control
At the control layer of the pulp chests and refiners, C98043-A1603-L11 handles its designated signal or control duty as a Gating Circuit Board. During grade change, the system uses this function to coordinate flow, consistency and equipment permissives, helping it deliver stable stock to the machine. -
03 · WATER & WASTEWATER
Align sludge-pump control with Gating Circuit
During operation of the positive-displacement pumps and flow feedback, C98043-A1603-L11 serves its documented function as a Gating Circuit Board. During solids-loading change, the system uses this function to hold the commanded feed rate as process load changes, helping it keep sludge transfer stable.
Technical specifications for C98043-A1603-L11
-
Product ModelC98043-A1603-L11
-
Product ParametersGating circuit board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassGating circuit board
-
Drive FamilySIMOREG 6RA24
-
Primary FunctionRoutes firing pulses to the converter thyristor bridges
-
Power ArchitectureSIMOREG gate-control electronics
-
Voltage ClassInstalled 6RA24 converter class
-
Current RatingConverter-defined armature current
-
Power SectionGating section
-
Mechanical DesignC98043 board assembly
-
Electrical InterfaceCompanion order 6RY1243-0EA00
-
Commissioning CheckConfirm L11 revision and firing sequence
View all additional
Alternative Names
C98043 A1603 L11
SIMOREG 6RA24 Gating circuit board
Siemens Gating circuit board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match C98043-A1603-L11 to the installed SIMOREG 6RA24
Siemens C98043-A1603-L11 is a Gating circuit board used in the SIMOREG 6RA24 to route firing pulses to the converter thyristor bridges. Its simoreg gate-control electronics role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm Installed 6RA24 converter class, Converter-defined armature current, the gating section, c98043 board assembly and companion order 6ry1243-0ea00. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete confirm l11 revision and firing sequence, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: C98043-A1603-L11
- Function: Routes firing pulses to the converter thyristor bridges
- Family: SIMOREG 6RA24
The Siemens C98043-A1603-L11 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete C98043-A1603-L11 identity before exchange
Treat C98043-A1603-L11 as a configuration-specific Gating circuit board for the SIMOREG 6RA24. Match the complete Siemens article number, installed gating section, board or module revision, mechanical design and approved replacement record before removal.
Photograph companion order 6ry1243-0ea00, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented c98043 board assembly and any cooling or discharge provisions while the drive is isolated.
After installation, confirm l11 revision and firing sequence. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: C98043-A1603-L11
- Installed section: Gating section
- Release check: Confirm L11 revision and firing sequence
The Siemens C98043-A1603-L11 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for C98043-A1603-L11
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens C98043-A1603-L11 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size6.5 × 18.5 × 3.5 cm
-
Shipping weight0.72 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about C98043-A1603-L11
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What operating role does the L11 thyristor firing board perform?
In C98043-A1603-L11, the documented role is to routes firing pulses to the converter thyristor bridges within the SIMOREG 6RA24; confirm the complete nameplate and gating section before ordering. -
Does the L11 thyristor firing board match the documented voltage requirement?
For C98043-A1603-L11, compare Installed 6RA24 converter class with the converter nameplate, power architecture and controlled Siemens documentation. -
Which companion order 6ry1243-0ea00 details identify the L11 thyristor firing board?
Before removing C98043-A1603-L11, capture connector keys, adjacent assemblies, cable routing, grounding points and the board revision. -
How is the Converter-defined armature current rating of the L11 thyristor firing board verified?
Use the installed converter rating and Siemens documentation; visual similarity to another board is insufficient for C98043-A1603-L11. -
What isolation procedure applies to the L11 thyristor firing board power architecture?
Isolate every energy source, observe the Siemens discharge time, prove absence of voltage and apply the site lockout procedure before handling C98043-A1603-L11. -
What should be inspected on the L11 thyristor firing board at receipt?
Inspect the C98043-A1603-L11 label, coating, connectors, bent pins, contamination, transport damage and supplied protective packing. -
Which commissioning result releases the L11 thyristor firing board to service?
For C98043-A1603-L11: Confirm L11 revision and firing sequence. Also record insulation checks, drive diagnostics, functional results and the final hardware revision before release. -
Which site records confirm the L11 thyristor firing board configuration?
Send the C98043-A1603-L11 nameplate, installed converter type, gating section photos, quantity, fault symptoms and delivery destination.
READY TO VERIFY YOUR PART?
Get a C98043-A1603-L11 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
