PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOREG
- C98043-A7116-L100
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
C98043-A7116-L100 Field supply control board
Siemens C98043-A7116-L100 is a Field supply control board used in the SIMOREG DC Master converters. It regulates field-converter firing and motor field-current feedback and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC control supply, Field-circuit defined current, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC control supply, Field-circuit defined current, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Field supply control board
ACTUAL APPLICATIONS
Application context for C98043-A7116-L100
Manufacturer documentation places the Field Supply Control Board in practical drive applications. The three cases below describe different operating tasks in which C98043-A7116-L100 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Balance sludge-pump control with Field Supply
During operation of the positive-displacement pumps and flow feedback, C98043-A7116-L100 provides its specified system function as a Field Supply Control Board. During solids-loading change, the system uses this function to hold the commanded feed rate as process load changes, helping it keep sludge transfer stable. -
02 · MACHINERY MANUFACTURING
Supervise press sequencing with Field Supply process control
In the automation chain for the feed systems, dies and safety interfaces, C98043-A7116-L100 supports the configured automation role as a Field Supply Control Board. During part change, the system uses this function to apply the selected product recipe to the sequence, helping it produce the intended part without skipping an interlock. -
03 · PLASTICS & PACKAGING
Align palletizing during product-gap recovery
Inside the case conveyors and robot cells, C98043-A7116-L100 provides its specified system function as a Field Supply Control Board. During product-gap recovery, the system uses this function to restore coordinated flow after a controlled stop, helping it return the line to stable throughput.
Technical specifications for C98043-A7116-L100
-
Product ModelC98043-A7116-L100
-
Product ParametersField supply control board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassField supply control board
-
Drive FamilySIMOREG DC Master converters
-
Primary FunctionRegulates field-converter firing and motor field-current feedback
-
Power ArchitectureField supply electronics
-
Voltage Class24 V DC control supply
-
Current RatingField-circuit defined current
-
Power SectionField converter section
-
Mechanical DesignPlug-in control board
-
Electrical InterfaceField gate, current and supply plugs
-
Commissioning CheckVerify field polarity and regulation
View all additional
Alternative Names
C98043 A7116 L100
SIMOREG DC Master converters Field supply control board
Siemens A7116-L100 field board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match C98043-A7116-L100 to the installed SIMOREG DC Master converters
Siemens C98043-A7116-L100 is a Field supply control board used in the SIMOREG DC Master converters to regulate field-converter firing and motor field-current feedback. Its field supply electronics role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC control supply, Field-circuit defined current, the field converter section, plug-in control board and field gate, current and supply plugs. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete verify field polarity and regulation, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: C98043-A7116-L100
- Function: Regulates field-converter firing and motor field-current feedback
- Family: SIMOREG DC Master converters
The Siemens C98043-A7116-L100 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete C98043-A7116-L100 identity before exchange
Treat C98043-A7116-L100 as a configuration-specific Field supply control board for the SIMOREG DC Master converters. Match the complete Siemens article number, installed field converter section, board or module revision, mechanical design and approved replacement record before removal.
Photograph field gate, current and supply plugs, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in control board and any cooling or discharge provisions while the drive is isolated.
After installation, verify field polarity and regulation. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: C98043-A7116-L100
- Installed section: Field converter section
- Release check: Verify field polarity and regulation
The Siemens C98043-A7116-L100 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for C98043-A7116-L100
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens C98043-A7116-L100 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 20 × 4 cm
-
Shipping weight0.55 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about C98043-A7116-L100
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What operating role does C98043-A7116-L100 for field firing control in SIMOREG DC Master converters?
Use C98043-A7116-L100 only for regulates field-converter firing and motor field-current feedback in the documented SIMOREG DC Master converters. Engineering must confirm the installed field converter section, 24 V DC control supply and controlled drawing before work. -
Which measurements help diagnose field-current feedback faults around the A7116-L100 field board?
For C98043-A7116-L100, review drive alarms, DC-link or supply readings, command status, field gate, current and supply plugs and the physical condition of the A7116-L100 field board. Compare results with a known-good channel where the site procedure permits. -
Which wiring and hardware records are needed before a C98043-A7116-L100 replacement?
Before removing C98043-A7116-L100, save parameters where applicable and photograph the plug-in control board, connector keys, cable labels, shield and protective-earth routes, adjacent assemblies and full nameplate. -
Which post-replacement tests release the A7116-L100 field board back to service?
After installation, verify field polarity and regulation. Maintenance should then review diagnostics, prove the regulation acceptance under controlled conditions and record the final result before production release. -
What label evidence confirms C98043-A7116-L100 as the correct A7116-L100 field board?
Match the complete C98043-A7116-L100 article, A7116-L100 field board, 24 V DC control supply, Field-circuit defined current, hardware suffix and installed SIMOREG DC Master converters configuration. A similar appearance or shortened article number is insufficient. -
Which revision, condition and accessory details should a seller state for C98043-A7116-L100?
The offer for C98043-A7116-L100 should state label revision, new or surplus condition, visible inspection result and whether connectors, memory, software, manuals or other accessories are included. Unlisted accessories are excluded. -
Which delivery details should appear on a quotation for C98043-A7116-L100?
For C98043-A7116-L100, request confirmed stock status, dispatch time, ship-from location, packed size, shipping weight and courier options. The written quotation controls the final delivery terms. -
What paperwork should procurement request with the A7116-L100 field board?
A C98043-A7116-L100 quotation should identify the supplied Data Sheet and Installation Instructions, 12-month AMIKON warranty, HS reference, origin, return conditions and any document or licence limitations.
READY TO VERIFY YOUR PART?
Get a C98043-A7116-L100 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
