PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7041-8GK85-0HA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7041-8GK85-0HA0 PER3 rectifier interface module
Siemens 6SE7041-8GK85-0HA0 is a PER3 rectifier interface module in the SIMOVERT MASTERDRIVES. It is used to connect compatible components and transfer the specified control or signal data.
Its documented configuration includes component class of PER3 rectifier interface, drive family of SIMOVERT MASTERDRIVES, primary function of Interfaces infeed and regenerative unit, and power architecture of Three-phase rectifier feedback control. During operation, the PER3 rectifier interface module performs its assigned PER3 rectifier interface module function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of PER3 rectifier interface, drive family of SIMOVERT MASTERDRIVES, primary function of Interfaces infeed and regenerative unit, and power architecture of Three-phase rectifier feedback control. During operation, the PER3 rectifier interface module performs its assigned PER3 rectifier interface module function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete PER3 rectifier interface module
ACTUAL APPLICATIONS
Application context for 6SE7041-8GK85-0HA0
Manufacturer documentation places the Per3 Rectifier Interface Module in practical drive applications. The three cases below describe different operating tasks in which 6SE7041-8GK85-0HA0 performs its documented product-family role with the configured companion equipment.
-
01 · PLASTICS & PACKAGING
Track web transport during format change process control
As part of the unwinders, dancers and pull rolls, 6SE7041-8GK85-0HA0 performs its assigned control role as a Per3 Rectifier Interface Module. During format change, the system uses this function to synchronize the driven sections with product position, helping it protect web tension and print registration. -
02 · AUTOMOTIVE
Govern robotic joining during station restart
Inside the robots, fixtures and clamp groups, 6SE7041-8GK85-0HA0 supports the configured automation role as a Per3 Rectifier Interface Module. During station restart, the system uses this function to confirm tooling readiness before the cycle starts, helping it prevent an incomplete joining cycle. -
03 · WATER & WASTEWATER
Govern sludge-pump control during solids-loading change
As part of the positive-displacement pumps and flow feedback, 6SE7041-8GK85-0HA0 provides its specified system function as a Per3 Rectifier Interface Module. During solids-loading change, the system uses this function to hold the commanded feed rate as process load changes, helping it keep sludge transfer stable.
Technical specifications for 6SE7041-8GK85-0HA0
-
Product Model6SE7041-8GK85-0HA0
-
Product ParametersPER3 rectifier interface module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassPER3 rectifier interface
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionInterfaces infeed and regenerative unit
-
Power ArchitectureThree-phase rectifier feedback control
-
Voltage Class500–575 V / 660–690 V AC
-
Current RatingDesign H/K interface class
-
Line Frequency50/60 Hz
-
Power SectionInfeed and regenerative section
-
Mechanical DesignDesigns H and K
-
Electrical InterfaceRectifier control connectors
-
Cooling IntegrationCabinet-cooled drive assembly
-
Board ProtectionIndustrial interface board
-
Busbar TreatmentInternal converter busbars
-
Service ClassificationSiemens spare part
-
Commissioning CheckVerify high-voltage design code
View all additional
Alternative Names
6SE7041 8GK85 0HA0
SIMOVERT MASTERDRIVES PER3 rectifier interface module
Siemens PER3 rectifier interface module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7041-8GK85-0HA0 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7041-8GK85-0HA0 is a PER3 rectifier interface module used in the SIMOVERT MASTERDRIVES.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SE7041-8GK85-0HA0
- Product class: PER3 rectifier interface module
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7041-8GK85-0HA0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7041-8GK85-0HA0 identity before exchange
Replace 6SE7041-8GK85-0HA0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SE7041-8GK85-0HA0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SE7041-8GK85-0HA0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 6SE7041-8GK85-0HA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7041-8GK85-0HA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size37 × 29 × 4 cm
-
Shipping weight3.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7041-8GK85-0HA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function does the high-voltage PER3 interface perform?
In 6SE7041-8GK85-0HA0, it performs interfaces infeed and regenerative unit within the documented SIMOVERT MASTERDRIVES configuration. -
Which electrical rating applies to the high-voltage PER3 interface?
For 6SE7041-8GK85-0HA0, verify 500–575 V / 660–690 V AC and Design H/K interface class against the installed power section. -
How should the Infeed and regenerative section be recorded for the high-voltage PER3 interface?
Before removing 6SE7041-8GK85-0HA0, photograph the exact section position, labels and adjacent assemblies. -
Which connection checks matter for the high-voltage PER3 interface?
Inspect Rectifier control connectors on 6SE7041-8GK85-0HA0 for orientation, contact condition, clearance and correct seating. -
How is cooling preserved for the high-voltage PER3 interface?
For 6SE7041-8GK85-0HA0, preserve the documented thermal path, seals, airflow or coolant arrangement: Cabinet-cooled drive assembly. -
Can the high-voltage PER3 interface replace a similar Siemens component?
Match the full 6SE7041-8GK85-0HA0 article number, section role, board designation and mechanical interface; appearance is insufficient. -
Which test releases the high-voltage PER3 interface to service?
For 6SE7041-8GK85-0HA0: Verify high-voltage design code. Then verify insulation, diagnostics and the affected drive function. -
What quotation details identify the high-voltage PER3 interface?
Provide the 6SE7041-8GK85-0HA0 nameplate, installed Infeed and regenerative section, Rectifier control connectors, quantity, photographs and destination.
READY TO VERIFY YOUR PART?
Get a 6SE7041-8GK85-0HA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
