PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- 6SE7090-0XX84-1CE0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SE7090-0XX84-1CE0 IPI parallel switch module
Siemens 6SE7090-0XX84-1CE0 is a IPI parallel switch module in the SIMOVERT MASTERDRIVES. It is used to exchange control and diagnostic data between the connected automation devices.
Its documented configuration includes component class of IPI parallel switch module, drive family of SIMOVERT MASTERDRIVES, primary function of Coordinates parallel inverter switching, and power architecture of IPI multi-inverter interface. During operation, the IPI parallel switch module transfers data across the documented communication interfaces and reports the available link or diagnostic states.
Its documented configuration includes component class of IPI parallel switch module, drive family of SIMOVERT MASTERDRIVES, primary function of Coordinates parallel inverter switching, and power architecture of IPI multi-inverter interface. During operation, the IPI parallel switch module transfers data across the documented communication interfaces and reports the available link or diagnostic states.
BEFORE YOU BUY
Confirm the complete IPI parallel switch module
ACTUAL APPLICATIONS
Where 6SE7090-0XX84-1CE0 Fits in Paper, Plastics And Metalworking
Paper, plastics and metalworking uses depend on installation compatibility, operating conditions and project requirements.
-
01 · PULP & PAPER
Paper Manufacturing, Tissue Production and Paper Converting
Paper production, finishing and converting for commercial paper products.Tissue and napkin manufacturing for everyday consumer paper products. -
02 · PLASTICS & RUBBER
Plastic Products Manufacturing and Rubber Material Processing
Plastic material production through extrusion, calendering and film processing.Rubber material preparation and molding for manufactured rubber products. -
03 · METALS & WIRE
Metal Rolling Mills and Wire Production Facilities
Metal processing and rolling for industrial materials manufacturing operations.Wire and cable production within the metal processing industry.
Technical specifications for 6SE7090-0XX84-1CE0
-
Product Model6SE7090-0XX84-1CE0
-
Product ParametersIPI parallel switch module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIPI parallel switch module
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionCoordinates parallel inverter switching
-
Power ArchitectureIPI multi-inverter interface
-
Voltage Class380–480 V AC system
-
Current RatingFive to six inverter units
-
Control SupplyInternal 24 V control circuits
-
Power SectionParallel inverter control bay
-
Mechanical DesignPlug-in interface circuit board
-
Electrical InterfaceIPI synchronization connectors
-
Cooling IntegrationCabinet ambient cooling
-
Board Designation6SE7090-0XX84-1CE0 IPI
-
Service RoleParallel-drive interface spare
-
Product StatusLegacy Siemens module
-
Commissioning CheckVerify synchronized enable sequence
View all additional
Alternative Names
6SE7090 0XX84 1CE0
SIMOVERT MASTERDRIVES IPI parallel switch module
Siemens IPI parallel switch module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SE7090-0XX84-1CE0 to the installed SIMOVERT MASTERDRIVES
Siemens 6SE7090-0XX84-1CE0 is a IPI parallel switch module used in the SIMOVERT MASTERDRIVES.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SE7090-0XX84-1CE0
- Product class: IPI parallel switch module
- Family: SIMOVERT MASTERDRIVES
The Siemens 6SE7090-0XX84-1CE0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SE7090-0XX84-1CE0 identity before exchange
Replace 6SE7090-0XX84-1CE0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SE7090-0XX84-1CE0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SE7090-0XX84-1CE0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SE7090-0XX84-1CE0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SE7090-0XX84-1CE0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size26.3 × 12.5 × 2.5 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SE7090-0XX84-1CE0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which process depends on the five-unit IPI switch module?
The five-unit IPI switch module is used in the documented SIMOVERT MASTERDRIVES configuration for coordinates parallel inverter switching. -
How is a 380–480 V AC system mismatch prevented for the five-unit IPI switch module?
For the five-unit IPI switch module, match 380–480 V AC system and Five to six inverter units to the installed equipment nameplate. -
What control path does the component handle for the five-unit IPI switch module?
The five-unit IPI switch module performs coordinates parallel inverter switching through the ipi multi-inverter interface. -
Where should the IPI sync board label appear for the five-unit IPI switch module?
For the five-unit IPI switch module, record 6SE7090-0XX84-1CE0 IPI together with the complete article and installed revision. -
How are ipi synchronization connectors restored correctly for the five-unit IPI switch module?
On the five-unit IPI switch module, inspect ipi synchronization connectors for keying, damage, contamination, routing and secure seating. -
What supply symptom can mimic failure for the five-unit IPI switch module?
Before energizing the five-unit IPI switch module, measure internal 24 v control circuits and confirm the documented polarity or phase condition. -
Which details are needed before ordering for the five-unit IPI switch module?
A five-unit IPI switch module replacement must match its electrical class, section role, companion hardware and mechanical interface. -
What controlled test follows installation for the five-unit IPI switch module?
For the five-unit IPI switch module, verify synchronized enable sequence; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6SE7090-0XX84-1CE0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6SE7090-0XX84-1CE0IPI parallel switch moduleManufacturer: SiemensView Details
-
6SE7028-2HF84-1BH0normalizing module serviceManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
