PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- A5E00207498
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E00207498 TDB converter control board
Siemens A5E00207498 is a TDB converter control board for the SIMOVERT MASTERDRIVES converter modules. It is used to coordinates 690 v converter control signals. Confirm the exact article, electrical class, interfaces, companion hardware and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete TDB converter control board
ACTUAL APPLICATIONS
Application context for A5E00207498
Manufacturer documentation places the Tdb Converter Control Board in practical drive applications. The three cases below describe different operating tasks in which A5E00207498 performs its documented product-family role with the configured companion equipment.
-
01 · MINING & METALS
Maintain bulk conveying during material surge
At the control layer of the feeders, belts and transfer chutes, A5E00207498 performs its assigned control role as a Tdb Converter Control Board. During material surge, the system uses this function to adapt equipment demand to material flow, helping it reduce spillage and belt overload. -
02 · PLASTICS & PACKAGING
Stabilize carton forming with Tdb Converter process control
At the control layer of the blank feeders and folding stations, A5E00207498 handles its designated signal or control duty as a Tdb Converter Control Board. During registration correction, the system uses this function to apply the selected format to the machine sequence, helping it produce the intended package geometry. -
03 · MACHINERY MANUFACTURING
Manage robotic handling with Tdb Converter process control
Within the robots, grippers and transfer fixtures, A5E00207498 supports the configured automation role as a Tdb Converter Control Board. During fault recovery, the system uses this function to restore the cell from a defined intermediate state, helping it resume material flow without losing part identity.
Technical specifications for A5E00207498
-
Product ModelA5E00207498
-
Product ParametersTDB converter control board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassTDB converter control board
-
Drive FamilySIMOVERT MASTERDRIVES converter modules
-
Primary FunctionCoordinates 690 V converter control signals
-
Power ArchitectureTDB digital control electronics
-
Voltage Class690 V converter class
-
Current RatingSignal-level board channels
-
Control SupplyInternal regulated control supply
-
Power SectionConverter control section
-
Mechanical DesignPlug-in printed-circuit board
-
Electrical InterfaceBackplane and converter connectors
-
Cooling IntegrationCabinet airflow path
-
Board DesignationA5E00207498 TDB board
-
Service RoleConverter module repair spare
-
Product StatusLegacy Siemens component
-
Commissioning CheckVerify board identity and signal response
View all additional
Alternative Names
A5E00207498
SIMOVERT MASTERDRIVES converter modules TDB converter control board
Siemens TDB converter control board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E00207498 to the installed SIMOVERT MASTERDRIVES converter modules
Siemens A5E00207498 is a TDB converter control board used in the SIMOVERT MASTERDRIVES converter modules to coordinate 690 V converter control signals. Its tdb digital control electronics architecture must match the documented drive configuration, controlled hardware arrangement and assigned converter control section.
Before integration, confirm the 690 v converter class, signal-level board channels and internal regulated control supply. Compare the complete article, plug-in printed-circuit board and backplane and converter connectors with the installed equipment, cable schedule and the technical data recorded in the product PDF.
Maintain the documented cabinet airflow path, isolate all hazardous energy and apply ESD protection before handling the component. Complete the specified action to verify board identity and signal response, then review Siemens diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: A5E00207498
- Operating role: Coordinates 690 V converter control signals
- Connection class: Backplane and converter connectors
The Siemens A5E00207498 requires documented system integration for its converter control section, with the final verify board identity and signal response result recorded before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E00207498 configuration before exchange
Treat A5E00207498 as a configuration-specific TDB converter control board for the SIMOVERT MASTERDRIVES converter modules. Match the complete Siemens article identity, A5E00207498 TDB board, installed hardware revision, converter module repair spare and documented converter control section before removing the original component.
Photograph the plug-in printed-circuit board, backplane and converter connectors, cable labels, shielding, protective-earth points and adjacent assemblies. Record the 690 v converter class, signal-level board channels and internal regulated control supply so the replacement can be checked against the controlled drive documentation.
After installation, verify board identity and signal response. Restore only the approved project data and interface assignments, review power-stage or controller diagnostics, test the control or power path associated with coordinates 690 v converter control signals at a controlled operating point and retain the measured results in the maintenance record.
Features:
- Article and board: A5E00207498 TDB board
- Interface record: Backplane and converter connectors
- Release test: Verify board identity and signal response
The Siemens A5E00207498 requires documented replacement verification for its converter control section, with the final verify board identity and signal response result recorded before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for A5E00207498
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E00207498 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size27.7 × 15 × 1.8 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E00207498
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where is the 690 V TDB control board used?
The 690 V TDB control board is used in the documented SIMOVERT MASTERDRIVES converter modules configuration for coordinates 690 v converter control signals. -
Why does 690 V converter class matter for the 690 V TDB control board?
For the 690 V TDB control board, match 690 V converter class and Signal-level board channels to the installed equipment nameplate. -
Which job is performed by the 690 V TDB control board?
The 690 V TDB control board performs coordinates 690 v converter control signals through the tdb digital control electronics. -
How is the TDB board marking identified for the 690 V TDB control board?
For the 690 V TDB control board, record A5E00207498 TDB board together with the complete article and installed revision. -
What should be inspected at backplane and converter connectors for the 690 V TDB control board?
On the 690 V TDB control board, inspect backplane and converter connectors for keying, damage, contamination, routing and secure seating. -
Which supply check protects the 690 V TDB control board?
Before energizing the 690 V TDB control board, measure internal regulated control supply and confirm the documented polarity or phase condition. -
Can a similar board replace the 690 V TDB control board?
A 690 V TDB control board replacement must match its electrical class, section role, companion hardware and mechanical interface. -
What test releases the 690 V TDB control board to service?
For the 690 V TDB control board, verify board identity and signal response; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a A5E00207498 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
