PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SIMOVERT
- C98043-A7105-L4
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
C98043-A7105-L4 Power interface control board
Siemens C98043-A7105-L4 is a Power interface control board used in the SIMOVERT MASTERDRIVES. It connects controller commands to the converter power-stage electronics and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC control supply, Signal-level firing outputs, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC control supply, Signal-level firing outputs, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Power interface control board
ACTUAL APPLICATIONS
Application context for C98043-A7105-L4
Manufacturer documentation places the Power Interface Control Board in practical drive applications. The three cases below describe different operating tasks in which C98043-A7105-L4 performs its documented product-family role with the configured companion equipment.
-
01 · OIL & GAS
Maintain cooling-fan control with Power Interface
For the coordinated operation of the air coolers, fan motors and temperature feedback, C98043-A7105-L4 provides its specified system function as a Power Interface Control Board. During ambient-load change, the system uses this function to trim fan speed to the measured cooling requirement, helping it hold outlet temperature without unnecessary fan power. -
02 · PULP & PAPER
Supervise stock preparation with Power Interface
Within the pulp chests and refiners, C98043-A7105-L4 operates in its approved product-family role as a Power Interface Control Board. During grade change, the system uses this function to coordinate flow, consistency and equipment permissives, helping it deliver stable stock to the machine. -
03 · AUTOMOTIVE
Integrate paint-shop conveying during carrier accumulation
For the coordinated operation of the carrier tracking and booth interfaces, C98043-A7105-L4 serves its documented function as a Power Interface Control Board. During carrier accumulation, the system uses this function to route carriers by production status, helping it preserve body order through the process.
Technical specifications for C98043-A7105-L4
-
Product ModelC98043-A7105-L4
-
Product ParametersPower interface control board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassPower interface control board
-
Drive FamilySIMOVERT MASTERDRIVES
-
Primary FunctionConnects controller commands to the converter power-stage electronics
-
Power ArchitecturePower interface electronics
-
Voltage Class24 V DC control supply
-
Current RatingSignal-level firing outputs
-
Power SectionConverter power interface
-
Mechanical DesignPlug-in control board
-
Electrical InterfaceFiring, feedback and auxiliary connectors
-
Commissioning CheckVerify board revision and phase feedback
View all additional
Alternative Names
C98043 A7105 L4
SIMOVERT MASTERDRIVES Power interface control board
Siemens A7105-L4 interface board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match C98043-A7105-L4 to the installed SIMOVERT MASTERDRIVES
Siemens C98043-A7105-L4 is a Power interface control board used in the SIMOVERT MASTERDRIVES to connect controller commands to the converter power-stage electronics. Its power interface electronics role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC control supply, Signal-level firing outputs, the converter power interface, plug-in control board and firing, feedback and auxiliary connectors. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete verify board revision and phase feedback, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: C98043-A7105-L4
- Function: Connects controller commands to the converter power-stage electronics
- Family: SIMOVERT MASTERDRIVES
The Siemens C98043-A7105-L4 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete C98043-A7105-L4 identity before exchange
Treat C98043-A7105-L4 as a configuration-specific Power interface control board for the SIMOVERT MASTERDRIVES. Match the complete Siemens article number, installed converter power interface, board or module revision, mechanical design and approved replacement record before removal.
Photograph firing, feedback and auxiliary connectors, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented plug-in control board and any cooling or discharge provisions while the drive is isolated.
After installation, verify board revision and phase feedback. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: C98043-A7105-L4
- Installed section: Converter power interface
- Release check: Verify board revision and phase feedback
The Siemens C98043-A7105-L4 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for C98043-A7105-L4
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens C98043-A7105-L4 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 20 × 4 cm
-
Shipping weight0.55 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about C98043-A7105-L4
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where is the converter firing interface function used?
C98043-A7105-L4 performs connects controller commands to the converter power-stage electronics in the documented SIMOVERT MASTERDRIVES; first confirm the installed converter power interface. -
Which electrical identity defines the A7105-L4 interface board?
Compare C98043-A7105-L4, 24 V DC control supply, Signal-level firing outputs and the installed drive nameplate with Siemens documentation. -
What must match before phase feedback path work begins?
Confirm the plug-in control board, connector keys, controlled hardware position and complete C98043-A7105-L4 suffix. -
Which connections belong to the A7105-L4 interface board?
Record firing, feedback and auxiliary connectors, cable labels, grounding, adjacent assemblies and board orientation before removal. -
How should the converter firing interface assembly be isolated?
Apply site lockout, wait the specified discharge time, prove absence of voltage and use ESD controls before handling C98043-A7105-L4. -
What receiving inspection applies to C98043-A7105-L4?
Check the article label, suffix, connectors, coating, mechanical condition, contamination and protective packing. -
Which result completes the L4 revision validation?
Verify board revision and phase feedback. Record diagnostics and the controlled functional test before release. -
What details are needed to quote the A7105-L4 interface board?
Send the full C98043-A7105-L4 label, installed converter power interface, interface photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a C98043-A7105-L4 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
