PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6FX2001-5FN13
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6FX2001-5FN13 single-turn PROFINET absolute encoder
Siemens 6FX2001-5FN13 is a single-turn PROFINET absolute encoder documented for SINAMICS motion feedback systems. It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete single-turn PROFINET absolute encoder
ACTUAL APPLICATIONS
Application context for 6FX2001-5FN13
The applications below show typical industry settings, application scenarios, application areas and equipment for 6FX2001-5FN13. Confirm the exact product configuration before use.
-
01 · AUTOMOTIVE
Robotic assembly and transfer axes
Production cellsServo-axis position feedbackSynchronized conveyor indexing -
02 · MACHINE BUILDING
CNC and packaging machinery
Machine areas servedRotary-table position feedbackHigh-speed spindle referencing -
03 · LOGISTICS & MATERIAL HANDLING
Automated conveyors and crane drives
Application areasConveyor drive position trackingHoist and travel-axis feedback
Technical specifications for 6FX2001-5FN13
-
Product Model6FX2001-5FN13
-
Product ParametersSingle-turn PROFINET absolute encoder
-
In stock1 unit
-
ManufacturerSiemens
-
Encoder DesignSingle-turn absolute encoder
-
Communication InterfacePROFINET IO with RT / IRT
-
Encoder Resolution13 bit (8192 increments)
-
Resolution per Revolution1 to 8192 programmable
-
Supply Voltage10 to 30 V DC
-
Network Ports2 × M12, 4-pin
-
Supply Connector1 × M12, 4-pin
-
Transmission Rate100 Mbit/s
-
Code SamplingGray code
-
Shaft Diameter6 mm
-
Shaft Length10 mm
-
Maximum Mechanical Speed12000 rpm
-
Housing ProtectionIP67
-
Shaft Input ProtectionIP64
-
Operating Temperature-40 to +85 °C
View all additional
Alternative Names
6FX2001 5FN13
PROFINET single-turn absolute encoder
Siemens 13-bit motion-control encoder
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6FX2001-5FN13 to the installed SINAMICS motion feedback systems
Siemens 6FX2001-5FN13 is a single-turn PROFINET absolute encoder for the SINAMICS motion feedback systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare resolution per revolution (1 to 8192 programmable), supply voltage (10 to 30 V DC) and network ports (2 × M12, 4-pin) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6FX2001-5FN13
- Product class: single-turn PROFINET absolute encoder
- Family: SINAMICS motion feedback systems
The Siemens 6FX2001-5FN13 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6FX2001-5FN13 identity before exchange
Replace 6FX2001-5FN13 only after matching the complete article code, single-turn PROFINET absolute encoder, installed SINAMICS motion feedback systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6FX2001-5FN13
- Product class: single-turn PROFINET absolute encoder
- Family check: SINAMICS motion feedback systems
The Siemens 6FX2001-5FN13 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6FX2001-5FN13
- Siemens SINAMICS motion feedback systems references reviewed
- Exact Siemens identity required before service
Documentation for Siemens 6FX2001-5FN13 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size12.0 × 10.0 × 8.0 cm
-
Shipping weight0.54 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference90314990
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6FX2001-5FN13
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How does engineering confirm 6FX2001-5FN13 suits an existing PROFINET motion axis?
Confirm that the controller supports PROFINET IO RT or IRT, the project expects a single-turn absolute encoder, the programmed resolution is within 1 to 8192 positions per revolution, and the installed mechanics accept the 6 mm shaft and synchronous flange. -
Which electrical checks are required before replacing the installed encoder?
For 6FX2001-5FN13, verify the 10 to 30 V DC supply, both 4-pin M12 network ports, the 4-pin M12 supply connector, shield continuity and protective bonding before the old encoder is disconnected. -
What PROFINET settings should maintenance record before a planned shutdown?
Maintenance should save the 6FX2001-5FN13 device name, IP settings, controller project, encoder scaling, direction and zero reference, then label both network cables so the ring or line topology can be restored correctly. -
How should commissioning restore the encoder resolution and reference position?
Load the approved controller project, set the documented single-turn scaling within the 1 to 8192 range, verify direction of rotation, establish the machine reference safely and compare actual position with the mechanical datum. -
How can technicians separate encoder failure from network or supply faults?
Measure the 10 to 30 V DC supply at 6FX2001-5FN13, inspect M12 pinning and shielding, check PROFINET diagnostics and link status, then compare position feedback while turning the shaft slowly before condemning the encoder. -
Which mechanical precautions protect the 6 mm shaft during installation?
Align the coupling without forcing the 6 mm shaft, prevent axial or radial preload, keep the encoder below the documented speed and load limits, and confirm that the shaft rotates freely before powered testing. -
Can distributors offer 6FX2001-5FN25 as a direct substitute?
No direct substitution is established: 6FX2001-5FN13 is a single-turn encoder, while 6FX2001-5FN25 is a different order code. Compare turn count, resolution, flange, shaft, connectors, project configuration and controller support before proposing an alternative. -
What details should an MRO quotation include for this Siemens encoder?
The quotation should state the complete 6FX2001-5FN13 article number, quantity, single-turn PROFINET requirement, 6 mm shaft, M12 connector arrangement, destination and requested delivery date; include a nameplate photo when replacing installed equipment.
READY TO VERIFY YOUR PART?
Get a 6FX2001-5FN13 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
