PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6RY1803-0AA05-0AA1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6RY1803-0AA05-0AA1 Advanced CUD board
Siemens 6RY1803-0AA05-0AA1 is a Advanced CUD board used in the SINAMICS DCM. It provides expanded converter control functions and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC control supply, 5 A maximum input, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC control supply, 5 A maximum input, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Advanced CUD board
ACTUAL APPLICATIONS
Application context for 6RY1803-0AA05-0AA1
Manufacturer documentation places the Advanced Cud Board in practical drive applications. The three cases below describe different operating tasks in which 6RY1803-0AA05-0AA1 performs its documented product-family role with the configured companion equipment.
-
01 · OIL & GAS
Align loading-pump operation during transfer-rate adjustment
In the automation chain for the transfer pumps, flow meters and loading headers, 6RY1803-0AA05-0AA1 supports the configured automation role as a Advanced Cud Board. During transfer-rate adjustment, the system uses this function to regulate pump speed from the transfer target, helping it keep product flow inside the agreed operating range. -
02 · MACHINERY MANUFACTURING
Control robotic handling with Advanced Cud process control
Across the robots, grippers and transfer fixtures, 6RY1803-0AA05-0AA1 handles its designated signal or control duty as a Advanced Cud Board. During fault recovery, the system uses this function to restore the cell from a defined intermediate state, helping it resume material flow without losing part identity. -
03 · PLASTICS & PACKAGING
Observe palletizing during product-gap recovery
For the coordinated operation of the case conveyors and robot cells, 6RY1803-0AA05-0AA1 serves its documented function as a Advanced Cud Board. During product-gap recovery, the system uses this function to restore coordinated flow after a controlled stop, helping it return the line to stable throughput.
Technical specifications for 6RY1803-0AA05-0AA1
-
Product Model6RY1803-0AA05-0AA1
-
Product ParametersAdvanced CUD board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassAdvanced CUD board
-
Drive FamilySINAMICS DCM
-
Primary FunctionProvides expanded converter control functions
-
Power ArchitectureAdvanced CUD control platform
-
Voltage Class24 V DC control supply
-
Current Rating5 A maximum input
-
Power SectionLeft or right CUD slot
-
Mechanical DesignUncoated board assembly
-
Electrical Interface6RY1803-0GA00 connector board
-
Commissioning CheckLoad parameters and verify DCM I/O
View all additional
Alternative Names
6RY1803 0AA05 0AA1
SINAMICS DCM Advanced CUD board
Siemens Advanced CUD assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6RY1803-0AA05-0AA1 to the installed SINAMICS DCM
Siemens 6RY1803-0AA05-0AA1 is an Advanced CUD board used in the SINAMICS DCM to provide expanded converter control functions. Its advanced cud control platform role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC control supply, 5 A maximum input, the left or right cud slot, uncoated board assembly and 6ry1803-0ga00 connector board. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete load parameters and verify dcm i/o, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6RY1803-0AA05-0AA1
- Function: Provides expanded converter control functions
- Family: SINAMICS DCM
The Siemens 6RY1803-0AA05-0AA1 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6RY1803-0AA05-0AA1 identity before exchange
Treat 6RY1803-0AA05-0AA1 as a configuration-specific Advanced CUD board for the SINAMICS DCM. Match the complete Siemens article number, installed left or right cud slot, board or module revision, mechanical design and approved replacement record before removal.
Photograph 6ry1803-0ga00 connector board, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented uncoated board assembly and any cooling or discharge provisions while the drive is isolated.
After installation, load parameters and verify dcm i/o. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6RY1803-0AA05-0AA1
- Installed section: Left or right CUD slot
- Release check: Load parameters and verify DCM I/O
The Siemens 6RY1803-0AA05-0AA1 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6RY1803-0AA05-0AA1
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6RY1803-0AA05-0AA1 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size33 × 10.2 × 25.4 cm
-
Shipping weight0.3 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6RY1803-0AA05-0AA1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What operating role does the Advanced CUD assembly perform?
6RY1803-0AA05-0AA1 is used to provides expanded converter control functions within the documented SINAMICS DCM configuration. -
Which voltage requirement applies to the Advanced CUD assembly?
Compare 24 V DC control supply with the installed drive nameplate and controlled Siemens documentation. -
How is the 5 A maximum input rating confirmed?
Match the complete 6RY1803-0AA05-0AA1 article, installed power section and connected semiconductor or motor hardware. -
Which connections identify the Advanced CUD assembly?
Record 6ry1803-0ga00 connector board, cable routing, grounding, board revision and adjacent assemblies before removal. -
How should the left or right cud slot be isolated?
Use site lockout, observe the Siemens discharge time and prove absence of voltage before handling 6RY1803-0AA05-0AA1. -
What arrival checks apply to the Advanced CUD assembly?
Inspect the exact label, connector condition, coating, bent pins, contamination, damage and protective packing. -
Which test releases the Advanced CUD assembly to service?
Load parameters and verify DCM I/O. Also record diagnostics and the controlled functional test result. -
What quotation details are required for the Advanced CUD assembly?
Send the 6RY1803-0AA05-0AA1 nameplate, installed drive type, section photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a 6RY1803-0AA05-0AA1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
