PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3040-0JA00-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3040-0JA00-0AA0 SINAMICS drive control unit
Siemens 6SL3040-0JA00-0AA0 is a SINAMICS drive control unit used in the SINAMICS S120. It coordinates drive objects, communication and system diagnostics and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC supply, Control-unit defined load, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC supply, Control-unit defined load, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete SINAMICS drive control unit
ACTUAL APPLICATIONS
6SL3040-0JA00-0AA0
Sinamics Drive Control Unit applications
Three model-specific service scenarios for 6SL3040-0JA00-0AA0; verify the exact Siemens configuration and controlled procedure before work.
-
01 · DRIVE OBJECT COORDINATION
Apply the
drive object coordinationUse 6SL3040-0JA00-0AA0 to coordinates drive objects, communication and system diagnostics within the documented SINAMICS S120. Confirm the drive control section, electrical class and controlled drawing before work. -
02 · TOPOLOGY RECONSTRUCTION
Prepare the
topology reconstructionRecord drive-cliq, ethernet and i/o, adjacent assemblies, cable routing, protective earth and configuration data. Preserve the exact 0JA00 control unit arrangement during replacement. -
03 · PROJECT COMMISSIONING
Complete the
project commissioningRestore project and verify topology. Review Siemens diagnostics and record the final 0JA00 control unit result before returning the affected function to service.
Technical specifications for 6SL3040-0JA00-0AA0
-
Product Model6SL3040-0JA00-0AA0
-
Product ParametersSINAMICS drive control unit
-
Place of shipmentXiamen, China
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassSINAMICS drive control unit
-
Drive FamilySINAMICS S120
-
Primary FunctionCoordinates drive objects, communication and system diagnostics
-
Power ArchitectureModular Control Unit platform
-
Voltage Class24 V DC supply
-
Current RatingControl-unit defined load
-
Power SectionDrive control section
-
Mechanical DesignRack-mounted control unit
-
Electrical InterfaceDRIVE-CLiQ, Ethernet and I/O
-
Commissioning CheckRestore project and verify topology
View all additional
Alternative Names
6SL3040 0JA00 0AA0
SINAMICS S120 SINAMICS drive control unit
Siemens 0JA00 control unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3040-0JA00-0AA0 to the installed SINAMICS S120
Siemens 6SL3040-0JA00-0AA0 is a SINAMICS drive control unit used in the SINAMICS S120 to coordinate drive objects, communication and system diagnostics. Its modular control unit platform role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC supply, Control-unit defined load, the drive control section, rack-mounted control unit and drive-cliq, ethernet and i/o. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete restore project and verify topology, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SL3040-0JA00-0AA0
- Function: Coordinates drive objects, communication and system diagnostics
- Family: SINAMICS S120
The Siemens 6SL3040-0JA00-0AA0 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3040-0JA00-0AA0 identity before exchange
Treat 6SL3040-0JA00-0AA0 as a configuration-specific SINAMICS drive control unit for the SINAMICS S120. Match the complete Siemens article number, installed drive control section, board or module revision, mechanical design and approved replacement record before removal.
Photograph drive-cliq, ethernet and i/o, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented rack-mounted control unit and any cooling or discharge provisions while the drive is isolated.
After installation, restore project and verify topology. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SL3040-0JA00-0AA0
- Installed section: Drive control section
- Release check: Restore project and verify topology
The Siemens 6SL3040-0JA00-0AA0 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SL3040-0JA00-0AA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3040-0JA00-0AA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 20 × 8 cm
-
Shipping weight1.5 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3040-0JA00-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where in the drive is 6SL3040-0JA00-0AA0 for drive object coordination in SINAMICS S120?
Use 6SL3040-0JA00-0AA0 only for coordinates drive objects, communication and system diagnostics in the documented SINAMICS S120. Engineering must confirm the installed drive control section, 24 V DC supply and controlled drawing before work. -
What symptoms should maintenance record before blaming 6SL3040-0JA00-0AA0 for a topology reconstruction fault?
For 6SL3040-0JA00-0AA0, review drive alarms, DC-link or supply readings, command status, drive-cliq, ethernet and i/o and the physical condition of the 0JA00 control unit. Compare results with a known-good channel where the site procedure permits. -
What must engineers capture before removing 6SL3040-0JA00-0AA0 from the drive control section?
Before removing 6SL3040-0JA00-0AA0, save parameters where applicable and photograph the rack-mounted control unit, connector keys, cable labels, shield and protective-earth routes, adjacent assemblies and full nameplate. -
Which post-replacement tests release the 0JA00 control unit back to service?
After installation, restore project and verify topology. Maintenance should then review diagnostics, prove the project commissioning under controlled conditions and record the final result before production release. -
Which commercial record should show 6SL3040-0JA00-0AA0 as the correct 0JA00 control unit?
Match the complete 6SL3040-0JA00-0AA0 article, 0JA00 control unit, 24 V DC supply, Control-unit defined load, hardware suffix and installed SINAMICS S120 configuration. A similar appearance or shortened article number is insufficient. -
What should a distributor disclose about the condition and revision of 6SL3040-0JA00-0AA0?
The offer for 6SL3040-0JA00-0AA0 should state label revision, new or surplus condition, visible inspection result and whether connectors, memory, software, manuals or other accessories are included. Unlisted accessories are excluded. -
What stock, dispatch and packing information does a buyer need for the 0JA00 control unit?
For 6SL3040-0JA00-0AA0, request confirmed stock status, dispatch time, ship-from location, packed size, shipping weight and courier options. The written quotation controls the final delivery terms. -
What paperwork should procurement request with the 0JA00 control unit?
A 6SL3040-0JA00-0AA0 quotation should identify the supplied Data Sheet and Installation Instructions, 12-month AMIKON warranty, HS reference, origin, return conditions and any document or licence limitations.
READY TO VERIFY YOUR PART?
Get a 6SL3040-0JA00-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
