PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3055-0AA00-4CA5
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3055-0AA00-4CA5 AOP30 operator control panel
Siemens 6SL3055-0AA00-4CA5 is a AOP30 operator control panel used in the SINAMICS G130 and G150. It provides local commissioning, parameter display and operator control and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC panel supply, Panel-defined current draw, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC panel supply, Panel-defined current draw, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete AOP30 operator control panel
ACTUAL APPLICATIONS
Application context for 6SL3055-0AA00-4CA5
Manufacturer documentation places the Aop30 Operator Control Panel in practical drive applications. The three cases below describe different operating tasks in which 6SL3055-0AA00-4CA5 performs its documented product-family role with the configured companion equipment.
-
01 · PULP & PAPER
Sequence dryer-section control with Aop30 Operator
For the coordinated operation of the steam groups and dryer drives, 6SL3055-0AA00-4CA5 serves its documented function as a Aop30 Operator Control Panel. During moisture correction, the system uses this function to align thermal and drive response with the running sheet, helping it support the target moisture profile. -
02 · MACHINERY MANUFACTURING
Verify machine-tool automation with Aop30 Operator
At the control layer of the spindles, axes and tool changers, 6SL3055-0AA00-4CA5 serves its documented function as a Aop30 Operator Control Panel. During cycle start, the system uses this function to coordinate the equipment states required by the active cycle, helping it complete the machining step with traceable status. -
03 · MINING & METALS
Balance crane motion with Aop30 Operator process control
Inside the hoists, trolleys and travel drives, 6SL3055-0AA00-4CA5 provides its specified system function as a Aop30 Operator Control Panel. During positioning approach, the system uses this function to shape acceleration and braking around the commanded move, helping it place the load without excessive swing.
Technical specifications for 6SL3055-0AA00-4CA5
-
Product Model6SL3055-0AA00-4CA5
-
Product ParametersAOP30 operator control panel
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassAOP30 operator control panel
-
Drive FamilySINAMICS G130 and G150
-
Primary FunctionProvides local commissioning, parameter display and operator control
-
Power ArchitectureAOP30 human-machine interface
-
Voltage Class24 V DC panel supply
-
Current RatingPanel-defined current draw
-
Power SectionCabinet operator station
-
Mechanical DesignDoor-mounted keypad display
-
Electrical InterfaceSerial operator-panel interface
-
Commissioning CheckTest keypad, display and parameter access
View all additional
Alternative Names
6SL3055 0AA00 4CA5
SINAMICS G130 and G150 AOP30 operator control panel
Siemens AOP30 operator panel
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3055-0AA00-4CA5 to the installed SINAMICS G130 and G150
Siemens 6SL3055-0AA00-4CA5 is an AOP30 operator control panel used in the SINAMICS G130 and G150 to provide local commissioning, parameter display and operator control. Its aop30 human-machine interface role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC panel supply, Panel-defined current draw, the cabinet operator station, door-mounted keypad display and serial operator-panel interface. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete test keypad, display and parameter access, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SL3055-0AA00-4CA5
- Function: Provides local commissioning, parameter display and operator control
- Family: SINAMICS G130 and G150
The Siemens 6SL3055-0AA00-4CA5 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3055-0AA00-4CA5 identity before exchange
Treat 6SL3055-0AA00-4CA5 as a configuration-specific AOP30 operator control panel for the SINAMICS G130 and G150. Match the complete Siemens article number, installed cabinet operator station, board or module revision, mechanical design and approved replacement record before removal.
Photograph serial operator-panel interface, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented door-mounted keypad display and any cooling or discharge provisions while the drive is isolated.
After installation, test keypad, display and parameter access. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SL3055-0AA00-4CA5
- Installed section: Cabinet operator station
- Release check: Test keypad, display and parameter access
The Siemens 6SL3055-0AA00-4CA5 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SL3055-0AA00-4CA5
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3055-0AA00-4CA5 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size25 × 18 × 8 cm
-
Shipping weight1.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3055-0AA00-4CA5
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 6SL3055-0AA00-4CA5 for local drive operation in SINAMICS G130 and G150?
Use 6SL3055-0AA00-4CA5 only for provides local commissioning, parameter display and operator control in the documented SINAMICS G130 and G150. Engineering must confirm the installed cabinet operator station, 24 V DC panel supply and controlled drawing before work. -
Which measurements help diagnose parameter display access faults around the AOP30 operator panel?
For 6SL3055-0AA00-4CA5, review drive alarms, DC-link or supply readings, command status, serial operator-panel interface and the physical condition of the AOP30 operator panel. Compare results with a known-good channel where the site procedure permits. -
Which wiring and hardware records are needed before a 6SL3055-0AA00-4CA5 replacement?
Before removing 6SL3055-0AA00-4CA5, save parameters where applicable and photograph the door-mounted keypad display, connector keys, cable labels, shield and protective-earth routes, adjacent assemblies and full nameplate. -
How should the keypad functional test be commissioned after fitting 6SL3055-0AA00-4CA5?
After installation, test keypad, display and parameter access. Maintenance should then review diagnostics, prove the keypad functional test under controlled conditions and record the final result before production release. -
Which suffix check protects an order for 6SL3055-0AA00-4CA5 as the correct AOP30 operator panel?
Match the complete 6SL3055-0AA00-4CA5 article, AOP30 operator panel, 24 V DC panel supply, Panel-defined current draw, hardware suffix and installed SINAMICS G130 and G150 configuration. A similar appearance or shortened article number is insufficient. -
Which revision, condition and accessory details should a seller state for 6SL3055-0AA00-4CA5?
The offer for 6SL3055-0AA00-4CA5 should state label revision, new or surplus condition, visible inspection result and whether connectors, memory, software, manuals or other accessories are included. Unlisted accessories are excluded. -
Which delivery details should appear on a quotation for 6SL3055-0AA00-4CA5?
For 6SL3055-0AA00-4CA5, request confirmed stock status, dispatch time, ship-from location, packed size, shipping weight and courier options. The written quotation controls the final delivery terms. -
Which warranty, document and customs records should accompany a 6SL3055-0AA00-4CA5 offer?
A 6SL3055-0AA00-4CA5 quotation should identify the supplied Data Sheet and Installation Instructions, 12-month AMIKON warranty, HS reference, origin, return conditions and any document or licence limitations.
READY TO VERIFY YOUR PART?
Get a 6SL3055-0AA00-4CA5 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
