PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3210-5FE15-0UF0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3210-5FE15-0UF0 Three Phase Servo Drive
Siemens 6SL3210-5FE15-0UF0 is a three phase servo drive in the SINAMICS V90 PROFINET range. It is intended for compatible industrial automation projects requiring the documented servo motion control.
The V90 drive supplies the configured servo motor from a three-phase mains connection and exchanges control data through PROFINET. This execution is rated for 5 kW and 12.6 A, with four digital inputs and two outputs. Motor pairing, control settings, cooling and the accepted motion project determine use.
The V90 drive supplies the configured servo motor from a three-phase mains connection and exchanges control data through PROFINET. This execution is rated for 5 kW and 12.6 A, with four digital inputs and two outputs. Motor pairing, control settings, cooling and the accepted motion project determine use.
BEFORE YOU BUY
Confirm the complete three phase servo drive
ACTUAL APPLICATIONS
Application context for 6SL3210-5FE15-0UF0
6SL3210-5FE15-0UF0 is a three phase servo drive for SINAMICS V90 PROFINET. Its industrial use includes packaging, automotive, industrial manufacturing. Selection depends on the connected equipment and documented configuration.
-
01 · PACKAGING
Packaging Production and Material Converting
Packaging Production and ConvertingIndustrial Packaging Quality Control -
02 · AUTOMOTIVE
Vehicle Manufacturing and Auto Parts Production
Automotive Assembly Process AutomationAutomotive Component Production Control -
03 · INDUSTRIAL MANUFACTURING
Industrial Assembly and Component Production
Industrial Assembly and ProductionManufacturing Process and Quality Control
Technical specifications for 6SL3210-5FE15-0UF0
-
Product Model6SL3210-5FE15-0UF0
-
Product ParametersThree Phase Servo Drive
-
In stock2 units
-
ManufacturerSiemens
-
Mains phase count3 AC
-
Mains voltage380–480 V, +10/−15%
-
Mains frequency45–66 Hz
-
Rated motor power5 kW
-
Rated output current12.6 A
-
Maximum output current37.8 A
-
Digital input count4
-
Digital output count2
-
Degree of protectionIP20 / UL open type
-
Frame sizeFSC
-
Cooling methodFan
-
Un-derated installation altitude1000 m
-
Operating temperature0–45 ℃
-
Storage temperature−40–70 ℃
-
Communication interfacePROFINET
View all additional
Alternative Names
6SL3210-5FE15-0UF0
SINAMICS V90 PROFINET Three Phase Servo Drive
SINAMICS V90 PROFINET 3 AC Three Phase Servo Drive
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6SL3210-5FE15-0UF0 three phase servo drive
Integrate 6SL3210-5FE15-0UF0 only in the documented SINAMICS V90 PROFINET configuration. Match the installed interfaces and the engineered application before selecting this three phase servo drive.
The V90 drive supplies the configured servo motor from a three-phase mains connection and exchanges control data through PROFINET. This execution is rated for 5 kW and 12.6 A, with four digital inputs and two outputs. Motor pairing, control settings, cooling and the accepted motion project determine use.
Use the applicable controlled instructions for SINAMICS V90 PROFINET. Validate the assigned signals, communication or output behaviour and retain the accepted configuration for 6SL3210-5FE15-0UF0.
Features:
- Mains phase count: 3 AC
- Mains voltage: 380–480 V, +10/−15%
- Mains frequency: 45–66 Hz
The 6SL3210-5FE15-0UF0 three phase servo drive requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6SL3210-5FE15-0UF0 three phase servo drive
Confirm the complete 6SL3210-5FE15-0UF0 identity and installed SINAMICS V90 PROFINET execution before replacement. Compare the connector arrangement and the technical values required by the existing project.
Record the three phase servo drive connections, project settings and associated accessories. Preserve the accepted configuration and isolate the affected circuits before exchange.
After fitting 6SL3210-5FE15-0UF0, restore the verified configuration and test every affected function. Retain the identification, diagnostic results and final acceptance record for the SINAMICS V90 PROFINET equipment.
Features:
- Mains phase count: 3 AC
- Mains voltage: 380–480 V, +10/−15%
- Mains frequency: 45–66 Hz
The 6SL3210-5FE15-0UF0 three phase servo drive requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6SL3210-5FE15-0UF0 three phase servo drive must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size14 × 26 × 24cm
-
Shipping weight5.65kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504409999
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3210-5FE15-0UF0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How many mains phases are required by V90 PN 5 kW?
For 6SL3210-5FE15-0UF0, the documented mains phase count is 3 AC. -
What mains-voltage tolerance applies to this V90 execution?
For 6SL3210-5FE15-0UF0, the documented mains voltage is 380–480 V, +10/−15%. -
Which line-frequency band is permitted for V90 PN?
For 6SL3210-5FE15-0UF0, the documented mains frequency is 45–66 Hz. -
What motor power is rated for this V90 model?
For 6SL3210-5FE15-0UF0, the documented rated motor power is 5 kW. -
What continuous output current is stated for V90 5 kW?
For 6SL3210-5FE15-0UF0, the documented rated output current is 12.6 A. -
What maximum servo output current can this V90 provide?
For 6SL3210-5FE15-0UF0, the documented maximum output current is 37.8 A. -
What identification supports ordering the SINAMICS V90 PROFINET spare?
Specify 6SL3210-5FE15-0UF0, quantity and the installed SINAMICS V90 PROFINET arrangement. Include label and connector photographs, and identify any required accessories separately. -
Which incoming checks apply to the three phase servo drive?
Compare the 6SL3210-5FE15-0UF0 label, connector condition and supplied accessories with the quotation. Verify the accepted SINAMICS V90 PROFINET configuration before replacing the installed item.
READY TO VERIFY YOUR PART?
Get a 6SL3210-5FE15-0UF0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
