PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3225-0BE25-5AA1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3225-0BE25-5AA1 PM250 power module
Siemens 6SL3225-0BE25-5AA1 is a PM250 power module used in the SINAMICS G120. It supplies a regenerative motor output and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 380–480 V AC, 18 A output, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 380–480 V AC, 18 A output, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete PM250 power module
ACTUAL APPLICATIONS
6SL3225-0BE25-5AA1
Pm250 Power Module applications
Three model-specific service scenarios for 6SL3225-0BE25-5AA1; verify the exact Siemens configuration and controlled procedure before work.
-
01 · 5.5 KW MOTOR DUTY
Service the
5.5 kW motor dutyUse 6SL3225-0BE25-5AA1 to supplies a regenerative motor output in the documented SINAMICS G120. Match 380–480 V AC, 18 A output and the installed 5.5 kw iec / 7.5 kw ho before work. -
02 · 18 A OUTPUT
Restore the
18 A outputRecord motor, line and control unit interfaces, adjacent hardware, cable routing and grounding before removal. Preserve the exact connector orientation and mechanical arrangement while installing the 18 A PM250 module. -
03 · REGENERATIVE TEST
Complete the
regenerative testTest regeneration and motor current. Review Siemens drive diagnostics and record the final 18 A PM250 module configuration before returning the affected machine function to service.
Technical specifications for 6SL3225-0BE25-5AA1
-
Product Model6SL3225-0BE25-5AA1
-
Product ParametersPM250 power module
-
Place of shipmentXiamen, China
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassPM250 power module
-
Drive FamilySINAMICS G120
-
Primary FunctionSupplies a regenerative motor output
-
Power ArchitecturePM250 line-commutated power stage
-
Voltage Class380–480 V AC
-
Current Rating18 A output
-
Power Section5.5 kW IEC / 7.5 kW HO
-
Mechanical DesignCompact power module
-
Electrical InterfaceMotor, line and Control Unit interfaces
-
Commissioning CheckTest regeneration and motor current
View all additional
Alternative Names
6SL3225 0BE25 5AA1
SINAMICS G120 PM250 power module
Siemens 18 A PM250 module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3225-0BE25-5AA1 to the installed SINAMICS G120
Siemens 6SL3225-0BE25-5AA1 is a PM250 power module used in the SINAMICS G120 to supply a regenerative motor output. Its pm250 line-commutated power stage role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 380–480 V AC, 18 A output, the 5.5 kw iec / 7.5 kw ho, compact power module and motor, line and control unit interfaces. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete test regeneration and motor current, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: 6SL3225-0BE25-5AA1
- Function: Supplies a regenerative motor output
- Family: SINAMICS G120
The Siemens 6SL3225-0BE25-5AA1 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3225-0BE25-5AA1 identity before exchange
Treat 6SL3225-0BE25-5AA1 as a configuration-specific PM250 power module for the SINAMICS G120. Match the complete Siemens article number, installed 5.5 kw iec / 7.5 kw ho, board or module revision, mechanical design and approved replacement record before removal.
Photograph motor, line and control unit interfaces, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented compact power module and any cooling or discharge provisions while the drive is isolated.
After installation, test regeneration and motor current. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: 6SL3225-0BE25-5AA1
- Installed section: 5.5 kW IEC / 7.5 kW HO
- Release check: Test regeneration and motor current
The Siemens 6SL3225-0BE25-5AA1 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 6SL3225-0BE25-5AA1
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3225-0BE25-5AA1 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size9.8 × 20.2 × 19.5 cm
-
Shipping weight2.34 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85044095
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3225-0BE25-5AA1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What operating role does the 18 A PM250 module perform?
6SL3225-0BE25-5AA1 is used to supplies a regenerative motor output within the documented SINAMICS G120 configuration. -
Which voltage requirement applies to the 18 A PM250 module?
Compare 380–480 V AC with the installed drive nameplate and controlled Siemens documentation. -
How is the 18 A output rating confirmed?
Match the complete 6SL3225-0BE25-5AA1 article, installed power section and connected semiconductor or motor hardware. -
Which connections identify the 18 A PM250 module?
Record motor, line and control unit interfaces, cable routing, grounding, board revision and adjacent assemblies before removal. -
How should the 5.5 kw iec / 7.5 kw ho be isolated?
Use site lockout, observe the Siemens discharge time and prove absence of voltage before handling 6SL3225-0BE25-5AA1. -
What arrival checks apply to the 18 A PM250 module?
Inspect the exact label, connector condition, coating, bent pins, contamination, damage and protective packing. -
Which test releases the 18 A PM250 module to service?
Test regeneration and motor current. Also record diagnostics and the controlled functional test result. -
What quotation details are required for the 18 A PM250 module?
Send the 6SL3225-0BE25-5AA1 nameplate, installed drive type, section photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a 6SL3225-0BE25-5AA1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
