PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3300-1AH32-5BA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3300-1AH32-5BA0 SINAMICS braking module assembly
Siemens 6SL3300-1AH32-5BA0 is a SINAMICS braking module assembly in the Siemens SINAMICS. It is used to perform the assigned signal, control or interface function in the installed equipment.
Its documented configuration includes component class of Braking module assembly, drive family of SINAMICS chassis drives, primary function of Transfers regenerative energy to resistor, and power architecture of DC-link braking chopper. During operation, the SINAMICS braking module assembly performs its assigned SINAMICS braking module assembly function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of Braking module assembly, drive family of SINAMICS chassis drives, primary function of Transfers regenerative energy to resistor, and power architecture of DC-link braking chopper. During operation, the SINAMICS braking module assembly performs its assigned SINAMICS braking module assembly function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete SINAMICS braking module assembly
ACTUAL APPLICATIONS
Where 6SL3300-1AH32-5BA0 Fits Across Major Industry Sectors
Uses span paper, logistics and plastics, subject to verified compatibility, operating conditions and project requirements.
-
01 · PULP & PAPER
Paper Manufacturing, Material Processing and Paper Converting
Paper manufacturing and processing for commercial paper product markets.Paper converting and finishing within industrial paper production operations. -
02 · TRANSPORT & LOGISTICS
Rail Freight Handling and Industrial Lifting Operations
Rail freight transportation and cargo handling within logistics operations.Industrial material handling and lifting for goods movement operations. -
03 · PLASTICS PROCESSING
Plastic Product Molding and Commercial Polymer Material Processing
Injection molding of plastic products for commercial manufacturing markets.Blow molding and thermoforming for industrial plastic product manufacturing.
Technical specifications for 6SL3300-1AH32-5BA0
-
Product Model6SL3300-1AH32-5BA0
-
Product ParametersSINAMICS braking module assembly
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassBraking module assembly
-
Drive FamilySINAMICS chassis drives
-
Primary FunctionTransfers regenerative energy to resistor
-
Power ArchitectureDC-link braking chopper
-
Voltage Class890–1,035 V DC link
-
Current Rating250 kW for 15 s
-
Control Supply24 V DC control input
-
Power SectionHX/JX chassis braking bay
-
Mechanical DesignBuilt-in chassis module
-
Electrical InterfaceBrake-resistor power terminals
-
Cooling IntegrationInternal air-cooled cabinet
-
Board Designation6SL3300-1AH32-5BA0 module
-
Service RoleDynamic-braking service component
-
Product StatusActive Siemens product family
-
Commissioning CheckTest threshold and resistor path
View all additional
Alternative Names
6SL3300 1AH32 5BA0
SINAMICS chassis drives SINAMICS braking module assembly
Siemens SINAMICS braking module assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3300-1AH32-5BA0 to the installed SINAMICS chassis drives
Siemens 6SL3300-1AH32-5BA0 is a SINAMICS braking module assembly used in the SINAMICS chassis drives.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SL3300-1AH32-5BA0
- Product class: SINAMICS braking module assembly
- Family: SINAMICS chassis drives
The Siemens 6SL3300-1AH32-5BA0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3300-1AH32-5BA0 identity before exchange
Replace 6SL3300-1AH32-5BA0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SL3300-1AH32-5BA0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SL3300-1AH32-5BA0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SL3300-1AH32-5BA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3300-1AH32-5BA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weight7.5 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3300-1AH32-5BA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
When does the 6SL3300-1AH32-5BA0 braking module conduct?
It switches regenerative DC-link energy into the connected braking resistor when the configured threshold is reached. -
What peak duty is associated with this module?
The documented braking capability is 250 kW for a 15-second interval within the permitted duty cycle. -
Which DC-link level must the braking circuit withstand?
The module is used in the high-voltage class reaching approximately 1,035 V DC. -
How should the external braking resistor be matched?
Confirm resistance, pulse energy, continuous duty, insulation and thermal protection against the drive documentation. -
What must be checked at the HX or JX chassis bay?
Verify the assigned mounting position, DC bus polarity, resistor terminals and protective-earth connection. -
Why should the resistor circuit be inspected after an overvoltage trip?
An open cable, damaged resistor or failed thermal contact can prevent the module from dissipating regenerated energy. -
What safety step precedes work on the braking module?
Isolate every energy source and prove the high-voltage DC link has discharged before touching terminals. -
How is braking performance tested without overstressing the drive?
Use a controlled deceleration profile, watch DC-link voltage and temperature, and confirm the expected braking response.
READY TO VERIFY YOUR PART?
Get a 6SL3300-1AH32-5BA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
