PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3350-6TK00-0EA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3350-6TK00-0EA0 Control interface module
Siemens 6SL3350-6TK00-0EA0 is a Control interface module in the Siemens SINAMICS. It is used to connect compatible components and transfer the specified control or signal data.
Its documented configuration includes component class of Control Interface Module, drive family of SINAMICS chassis drives, primary function of Links control and power electronics, and power architecture of CIM power-unit interface. During operation, the Control interface module performs its assigned Control interface module function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of Control Interface Module, drive family of SINAMICS chassis drives, primary function of Links control and power electronics, and power architecture of CIM power-unit interface. During operation, the Control interface module performs its assigned Control interface module function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete Control interface module
ACTUAL APPLICATIONS
Where 6SL3350-6TK00-0EA0 Fits Across Major Industry Sectors
Uses span plastics, printing and metalworking, subject to verified compatibility, operating conditions and project requirements.
-
01 · PLASTICS & RUBBER
Plastic Products Manufacturing and Rubber Material Processing
Plastic material production through extrusion, calendering and film processing.Rubber material preparation and molding for manufactured rubber products. -
02 · PRINTING & PACKAGING
Commercial Printing Facilities and Industrial Packaging Production
Commercial printing and production of printed materials for businesses.Industrial product packaging and packing across manufacturing production processes. -
03 · METALS & METALWORKING
Industrial Metal Machining, Forming and Rolling Production
Metal machining and finishing for industrial component manufacturing operations.Metal forming and rolling within industrial material production processes.
Technical specifications for 6SL3350-6TK00-0EA0
-
Product Model6SL3350-6TK00-0EA0
-
Product ParametersControl interface module
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassControl Interface Module
-
Drive FamilySINAMICS chassis drives
-
Primary FunctionLinks control and power electronics
-
Power ArchitectureCIM power-unit interface
-
Voltage ClassAir-cooled device class
-
Current Rating3 A module designation
-
Control Supply24 V DC nominal
-
Power SectionChassis control interface
-
Mechanical DesignInternal plug-in module
-
Electrical InterfacePower-unit signal connectors
-
Cooling IntegrationFor air-cooled equipment
-
Board Designation6SL3350-6TK00-0EA0 CIM
-
Service RoleSiemens replacement component
-
Product StatusPM300 active spare
-
Commissioning CheckMatch air-cooled CIM variant
View all additional
Alternative Names
6SL3350 6TK00 0EA0
SINAMICS air-cooled chassis drives Control interface module
Siemens Control interface module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3350-6TK00-0EA0 to the installed SINAMICS air-cooled chassis drives
Siemens 6SL3350-6TK00-0EA0 is a Control interface module used in the SINAMICS air-cooled chassis drives.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SL3350-6TK00-0EA0
- Product class: Control interface module
- Family: SINAMICS air-cooled chassis drives
The Siemens 6SL3350-6TK00-0EA0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3350-6TK00-0EA0 identity before exchange
Replace 6SL3350-6TK00-0EA0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SL3350-6TK00-0EA0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SL3350-6TK00-0EA0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 6SL3350-6TK00-0EA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3350-6TK00-0EA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size37.4 × 27 × 9.5 cm
-
Shipping weight4.5 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85176200
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3350-6TK00-0EA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which cooling version uses 6SL3350-6TK00-0EA0?
This CIM is the Siemens spare-part version for air-cooled SINAMICS chassis equipment. -
What is communicated through the Control Interface Module?
It links the power unit with its control electronics and carries internal operating and monitoring information. -
Why must an air-cooled CIM not be confused with a liquid-cooled version?
The supported equipment, internal interfaces and thermal monitoring arrangement differ between cooling variants. -
What does the 3 A designation describe on this spare?
It is part of the module identification data and should be checked together with the complete Siemens article number. -
How should the CIM connectors be inspected?
Check keying, latch condition, pin alignment, contamination and cable support before reconnecting the module. -
Is firmware selection required before ordering the 0EA0 version?
Confirm the installed power-unit generation and any documented hardware or firmware dependency in the Siemens records. -
What should remain untouched while replacing the CIM?
Avoid changing unrelated drive parameters, power wiring or cooling components unless the controlled maintenance plan requires it. -
How is communication confirmed after fitting 6SL3350-6TK00-0EA0?
Restore auxiliary power first, confirm the module is recognised, clear only explained faults and perform a controlled drive test.
READY TO VERIFY YOUR PART?
Get a 6SL3350-6TK00-0EA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
