PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- 6SL3985-6TM00-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6SL3985-6TM00-0AA0 GM150 thyristor module board
Siemens 6SL3985-6TM00-0AA0 is a GM150 thyristor module board in the SINAMICS GM150 medium-voltage drives. It is used to perform the assigned signal, control or interface function in the installed equipment.
Its documented configuration includes component class of GM150 thyristor module board, drive family of SINAMICS GM150 medium-voltage drives, primary function of Controls medium-voltage thyristor stage, and power architecture of GM150TYP firing electronics. During operation, the GM150 thyristor module board performs its assigned GM150 thyristor module board function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of GM150 thyristor module board, drive family of SINAMICS GM150 medium-voltage drives, primary function of Controls medium-voltage thyristor stage, and power architecture of GM150TYP firing electronics. During operation, the GM150 thyristor module board performs its assigned GM150 thyristor module board function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete GM150 thyristor module board
ACTUAL APPLICATIONS
Where 6SL3985-6TM00-0AA0 Fits Across Major Industry Sectors
Uses span paper, metals and plastics, subject to verified compatibility, operating conditions and project requirements.
-
01 · PULP & PAPER
Paper Manufacturing, Tissue Production and Paper Converting
Paper production, finishing and converting for commercial paper products.Tissue and napkin manufacturing for everyday consumer paper products. -
02 · METALS & METALWORKING
Steel Production and Commercial Aluminum Material Processing
Steel production and material processing for industrial manufacturing demand.Aluminum production and finishing for commercial nonferrous metal markets. -
03 · PLASTICS & RUBBER
Plastic Material Manufacturing, Extrusion and Film Production
Plastic material extrusion and processing for industrial manufacturing operations.Plastic film production and converting for manufactured plastic products.
Technical specifications for 6SL3985-6TM00-0AA0
-
Product Model6SL3985-6TM00-0AA0
-
Product ParametersGM150 thyristor module board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassGM150 thyristor module board
-
Drive FamilySINAMICS GM150 medium-voltage drives
-
Primary FunctionControls medium-voltage thyristor stage
-
Power ArchitectureGM150TYP firing electronics
-
Voltage Class3.3 kV drive class
-
Current RatingPower-stack defined current
-
Control Supply24 V DC at X21
-
Power SectionMedium-voltage converter section
-
Mechanical DesignProtected trigger-board assembly
-
Electrical InterfaceX21 and firing interfaces
-
Cooling IntegrationGM150 cabinet cooling
-
Board Designation6SL3985-6TM00-0AA0 module
-
Service RoleMedium-voltage repair spare
-
Product StatusSiemens service component
-
Commissioning CheckVerify isolation and firing sequence
View all additional
Alternative Names
6SL3985 6TM00 0AA0
SINAMICS GM150 medium-voltage drives GM150 thyristor module board
Siemens GM150 thyristor module board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match 6SL3985-6TM00-0AA0 to the installed SINAMICS GM150 medium-voltage drives
Siemens 6SL3985-6TM00-0AA0 is a GM150 thyristor module board used in the SINAMICS GM150 medium-voltage drives.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: 6SL3985-6TM00-0AA0
- Product class: GM150 thyristor module board
- Family: SINAMICS GM150 medium-voltage drives
The Siemens 6SL3985-6TM00-0AA0 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete 6SL3985-6TM00-0AA0 identity before exchange
Replace 6SL3985-6TM00-0AA0 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact 6SL3985-6TM00-0AA0 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens 6SL3985-6TM00-0AA0 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6SL3985-6TM00-0AA0
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens 6SL3985-6TM00-0AA0 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size24.8 × 20.8 × 2 cm
-
Shipping weight0.38 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6SL3985-6TM00-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where is the 3.3 kV GM150 trigger module used?
The 3.3 kV GM150 trigger module is used in the documented SINAMICS GM150 medium-voltage drives configuration for controls medium-voltage thyristor stage. -
Why does 3.3 kV drive class matter for the 3.3 kV GM150 trigger module?
For the 3.3 kV GM150 trigger module, match 3.3 kV drive class and Power-stack defined current to the installed equipment nameplate. -
Which job is performed by the 3.3 kV GM150 trigger module?
The 3.3 kV GM150 trigger module performs controls medium-voltage thyristor stage through the gm150typ firing electronics. -
How is the GM150TYP assembly identified for the 3.3 kV GM150 trigger module?
For the 3.3 kV GM150 trigger module, record 6SL3985-6TM00-0AA0 module together with the complete article and installed revision. -
What should be inspected at x21 and firing interfaces for the 3.3 kV GM150 trigger module?
On the 3.3 kV GM150 trigger module, inspect x21 and firing interfaces for keying, damage, contamination, routing and secure seating. -
Which supply check protects the 3.3 kV GM150 trigger module?
Before energizing the 3.3 kV GM150 trigger module, measure 24 v dc at x21 and confirm the documented polarity or phase condition. -
Can a similar board replace the 3.3 kV GM150 trigger module?
A 3.3 kV GM150 trigger module replacement must match its electrical class, section role, companion hardware and mechanical interface. -
What test releases the 3.3 kV GM150 trigger module to service?
For the 3.3 kV GM150 trigger module, verify isolation and firing sequence; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a 6SL3985-6TM00-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6SL3985-6TM00-0AA0GM150 thyristor module boardManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
