PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E36717797
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E36717797 IGD2 R4 driver board
Siemens A5E36717797 is a IGD2 R4 driver board for the SINAMICS S120 multi-axis drives. It is used to controls 310 a igbt switching. Confirm the complete article number, installed drive, electrical class, interfaces and cooling arrangement before ordering.
BEFORE YOU BUY
Confirm the complete IGD2 R4 driver board
ACTUAL APPLICATIONS
Application context for A5E36717797
Manufacturer documentation places the Igd2 R4 Driver Board in practical drive applications. The three cases below describe different operating tasks in which A5E36717797 performs its documented product-family role with the configured companion equipment.
-
01 · AUTOMOTIVE
Control robotic joining with Igd2 R4 process control
Inside the robots, fixtures and clamp groups, A5E36717797 provides its specified system function as a Igd2 R4 Driver Board. During station restart, the system uses this function to confirm tooling readiness before the cycle starts, helping it prevent an incomplete joining cycle. -
02 · OIL & GAS
Balance compressor auxiliary drives with Igd2 R4
Across the lube-oil pumps, seal systems and ventilation motors, A5E36717797 handles its designated signal or control duty as a Igd2 R4 Driver Board. During compressor start, the system uses this function to sequence auxiliary motor operation around train readiness, helping it establish the support systems before process loading. -
03 · WATER & WASTEWATER
Integrate sludge-pump control during solids-loading change
Across the positive-displacement pumps and flow feedback, A5E36717797 handles its designated signal or control duty as a Igd2 R4 Driver Board. During solids-loading change, the system uses this function to hold the commanded feed rate as process load changes, helping it keep sludge transfer stable.
Technical specifications for A5E36717797
-
Product ModelA5E36717797
-
Product ParametersIGD2 R4 driver board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIGD2/R4 driver board
-
Drive FamilySINAMICS S120 multi-axis
-
Primary FunctionControls 310 A IGBT switching
-
Power ArchitectureIGD2/R4 gate-drive architecture
-
Voltage Class480 V AC / 650 V DC
-
Current Rating310 A TIM class
-
Control SupplyIsolated control-side supply
-
Power SectionMulti-axis inverter section
-
Mechanical DesignCompact TIM board assembly
-
Electrical InterfaceInternal gate and monitor plugs
-
Cooling IntegrationMounted on cooled power stack
-
Board DesignationA5E36717797 IGD2/R4
-
Service RolePower-block service component
-
Product StatusSiemens repair spare
-
Commissioning CheckConfirm 310 A TIM marking
View all additional
Alternative Names
A5E36717797
SINAMICS S120 multi-axis drives IGD2 R4 driver board
Siemens IGD2 R4 driver board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E36717797 to the installed SINAMICS S120 multi-axis drives
Siemens A5E36717797 is a IGD2 R4 driver board used in the SINAMICS S120 multi-axis drives.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: A5E36717797
- Product class: IGD2 R4 driver board
- Family: SINAMICS S120 multi-axis drives
The Siemens A5E36717797 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E36717797 identity before exchange
Replace A5E36717797 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact A5E36717797 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens A5E36717797 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for A5E36717797
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E36717797 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size21.6 × 12.1 × 6.6 cm
-
Shipping weight0.58 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E36717797
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What rating separates A5E36717797 from the 380 A variant?
A5E36717797 is identified as the 310 A IGD2/R4 TIM board. -
Which SINAMICS arrangement uses this compact driver board?
It belongs to a documented S120 multi-axis inverter power section. -
What does the 480 V / 650 V DC marking confirm?
It confirms the applicable AC drive and DC-link voltage class for the associated power block. -
How are gate and monitor plugs distinguished during removal?
Label them by channel and position and photograph their routing before releasing any connector. -
Why should the 310 A TIM be examined with the board?
A damaged semiconductor or feedback path can be the root cause of the driver-board fault. -
Is a larger-current IGD2/R4 board automatically compatible?
No. Current rating, gate characteristics, mounting and Siemens article identity must all match. -
What handling risk is important for the compact assembly?
Avoid ESD, connector side-load and bending stress across the populated circuit board. -
How is the serviced 310 A channel validated?
Check insulation and gate response, then monitor the affected axis during a limited-current commissioning test.
READY TO VERIFY YOUR PART?
Get a A5E36717797 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
