PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E36717808
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E36717808 IGD2 R4 power block board
Siemens A5E36717808 is a IGD2 R4 power block board in the SINAMICS repair components. It is used to perform the documented IGD2 R4 power block board function in the installed automation equipment.
Its documented configuration includes component class of IGD2/R4 driver board, drive family of SINAMICS repair components, primary function of Drives power semiconductor gates, and power architecture of IGD2/R4 power block control. During operation, the IGD2 R4 power block board performs its assigned IGD2 R4 power block board function through the documented power, signal and communication interfaces.
Its documented configuration includes component class of IGD2/R4 driver board, drive family of SINAMICS repair components, primary function of Drives power semiconductor gates, and power architecture of IGD2/R4 power block control. During operation, the IGD2 R4 power block board performs its assigned IGD2 R4 power block board function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete IGD2 R4 power block board
ACTUAL APPLICATIONS
Where A5E36717808 Fits Across Major Industry Sectors
Uses span metalworking, printing and mining, subject to verified compatibility, operating conditions and project requirements.
-
01 · METALS & METALWORKING
Industrial Metal Processing and Commercial Wire Manufacturing
Metal processing and rolling for industrial materials manufacturing operations.Wire and cable production within the metal processing industry. -
02 · PRINTING & PACKAGING
Commercial Printing Facilities and Industrial Packaging Production
Commercial printing and production of printed materials for businesses.Industrial product packaging and packing across manufacturing production processes. -
03 · MINING & MINERALS
Mineral Resource Extraction and Commercial Aggregate Material Production
Mineral resource extraction and preparation for industrial material supply.Aggregate production and processing for construction material supply chains.
Technical specifications for A5E36717808
-
Product ModelA5E36717808
-
Product ParametersIGD2 R4 power block board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIGD2/R4 driver board
-
Drive FamilySINAMICS repair components
-
Primary FunctionDrives power semiconductor gates
-
Power ArchitectureIGD2/R4 power block control
-
Voltage Class690 V AC / 1080 V DC
-
Current Rating260 A
-
Line FrequencyDrive-dependent switching
-
Power SectionPower block gate-drive section
-
Mechanical DesignTIM board assembly
-
Electrical InterfaceInternal gate-drive connectors
-
Cooling IntegrationMounted on cooled power block
-
Board ProtectionProtected repair-board assembly
-
Busbar TreatmentPower-block internal conductors
-
Service ClassificationWLX_316717 repair part
-
Commissioning CheckConfirm 260 A board marking
View all additional
Alternative Names
A5E36717808
SINAMICS power block repair parts IGD2 R4 power block board
Siemens IGD2 R4 power block board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E36717808 to the installed SINAMICS power block repair parts
Siemens A5E36717808 is a IGD2 R4 power block board used in the SINAMICS power block repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: A5E36717808
- Product class: IGD2 R4 power block board
- Family: SINAMICS power block repair parts
The Siemens A5E36717808 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E36717808 identity before exchange
Replace A5E36717808 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact A5E36717808 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens A5E36717808 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for A5E36717808
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E36717808 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.3 × 5.1 × 17.8 cm
-
Shipping weight1.8 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E36717808
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function does the 260 A IGD2/R4 board perform?
In A5E36717808, it performs drives power semiconductor gates within the documented SINAMICS power block repair parts configuration. -
Which electrical rating applies to the 260 A IGD2/R4 board?
For A5E36717808, verify 690 V AC / 1080 V DC and 260 A against the installed power section. -
How should the Power block gate-drive section be recorded for the 260 A IGD2/R4 board?
Before removing A5E36717808, photograph the exact section position, labels and adjacent assemblies. -
Which connection checks matter for the 260 A IGD2/R4 board?
Inspect Internal gate-drive connectors on A5E36717808 for orientation, contact condition, clearance and correct seating. -
How is cooling preserved for the 260 A IGD2/R4 board?
For A5E36717808, preserve the documented thermal path, seals, airflow or coolant arrangement: Mounted on cooled power block. -
Can the 260 A IGD2/R4 board replace a similar Siemens component?
Match the full A5E36717808 article number, section role, board designation and mechanical interface; appearance is insufficient. -
Which test releases the 260 A IGD2/R4 board to service?
For A5E36717808: Confirm 260 A board marking. Then verify insulation, diagnostics and the affected drive function. -
What quotation details identify the 260 A IGD2/R4 board?
Provide the A5E36717808 nameplate, installed Power block gate-drive section, Internal gate-drive connectors, quantity, photographs and destination.
READY TO VERIFY YOUR PART?
Get a A5E36717808 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
