PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E41929947
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E41929947 IGD11 R3 driver board
Siemens A5E41929947 is a IGD11 R3 driver board used in the SINAMICS G120 power electronics. It drives the installed igbt power module and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, Installed G120 voltage class, Power-module defined current, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, Installed G120 voltage class, Power-module defined current, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete IGD11 R3 driver board
ACTUAL APPLICATIONS
Application context for A5E41929947
Manufacturer documentation places the Igd11 R3 Driver Board in practical drive applications. The three cases below describe different operating tasks in which A5E41929947 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Govern intake-pump staging with Igd11 R3 process control
Within the intake pumps, wet-well levels and common headers, A5E41929947 serves its documented function as a Igd11 R3 Driver Board. During wet-well rise, the system uses this function to bring the next pump into the required speed range, helping it control level without a sudden hydraulic step. -
02 · MINING & METALS
Synchronize crane motion during positioning approach
During operation of the hoists, trolleys and travel drives, A5E41929947 handles its designated signal or control duty as a Igd11 R3 Driver Board. During positioning approach, the system uses this function to shape acceleration and braking around the commanded move, helping it place the load without excessive swing. -
03 · PLASTICS & PACKAGING
Protect form-fill-seal with Igd11 R3 process control
As part of the film feed, sealing jaws and discharge belts, A5E41929947 serves its documented function as a Igd11 R3 Driver Board. During speed ramp, the system uses this function to correct material position before sealing or cutting, helping it keep seals and cuts aligned with the product.
Technical specifications for A5E41929947
-
Product ModelA5E41929947
-
Product ParametersIGD11 R3 driver board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIGD11 R3 driver board
-
Drive FamilySINAMICS G120 power electronics
-
Primary FunctionDrives the installed IGBT power module
-
Power ArchitectureIGD11/R3 gate-drive stage
-
Voltage ClassInstalled G120 voltage class
-
Current RatingPower-module defined current
-
Power SectionInverter power block
-
Mechanical DesignIGBT driver-board assembly
-
Electrical InterfaceGate and feedback plugs
-
Commissioning CheckConfirm IGBT identity, polarity and isolation
View all additional
Alternative Names
A5E41929947
SINAMICS G120 power electronics IGD11 R3 driver board
Siemens IGD11 R3 board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E41929947 to the installed SINAMICS G120 power electronics
Siemens A5E41929947 is an IGD11 R3 driver board used in the SINAMICS G120 power electronics to drive the installed IGBT power module. Its igd11/r3 gate-drive stage role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm Installed G120 voltage class, Power-module defined current, the inverter power block, igbt driver-board assembly and gate and feedback plugs. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete confirm igbt identity, polarity and isolation, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: A5E41929947
- Function: Drives the installed IGBT power module
- Family: SINAMICS G120 power electronics
The Siemens A5E41929947 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E41929947 identity before exchange
Treat A5E41929947 as a configuration-specific IGD11 R3 driver board for the SINAMICS G120 power electronics. Match the complete Siemens article number, installed inverter power block, board or module revision, mechanical design and approved replacement record before removal.
Photograph gate and feedback plugs, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented igbt driver-board assembly and any cooling or discharge provisions while the drive is isolated.
After installation, confirm igbt identity, polarity and isolation. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: A5E41929947
- Installed section: Inverter power block
- Release check: Confirm IGBT identity, polarity and isolation
The Siemens A5E41929947 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for A5E41929947
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E41929947 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size27.7 × 15 × 1.8 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E41929947
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What operating role does the IGD11 R3 board perform?
A5E41929947 is used to drives the installed igbt power module within the documented SINAMICS G120 power electronics configuration. -
Which voltage requirement applies to the IGD11 R3 board?
Compare Installed G120 voltage class with the installed drive nameplate and controlled Siemens documentation. -
How is the Power-module defined current rating confirmed?
Match the complete A5E41929947 article, installed power section and connected semiconductor or motor hardware. -
Which connections identify the IGD11 R3 board?
Record gate and feedback plugs, cable routing, grounding, board revision and adjacent assemblies before removal. -
How should the inverter power block be isolated?
Use site lockout, observe the Siemens discharge time and prove absence of voltage before handling A5E41929947. -
What arrival checks apply to the IGD11 R3 board?
Inspect the exact label, connector condition, coating, bent pins, contamination, damage and protective packing. -
Which test releases the IGD11 R3 board to service?
Confirm IGBT identity, polarity and isolation. Also record diagnostics and the controlled functional test result. -
What quotation details are required for the IGD11 R3 board?
Send the A5E41929947 nameplate, installed drive type, section photos, quantity, fault symptoms and destination.
READY TO VERIFY YOUR PART?
Get a A5E41929947 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
