PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- D425-2DP/PN
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
D425-2DP/PN SIMOTION D425-2 DP/PN control unit
Siemens D425-2DP/PN is a SIMOTION D425-2 DP/PN control unit in the SIMOTION D4x5-2 portfolio. It combines performance class of BASIC with maximum axes of 16, providing the documented electrical, signal or communication function for this exact article.
Its technical profile includes drive-cliq interfaces of 4, profibus interfaces of 2 and profinet of 1 interface with 3 ports. The remaining ratings define the applicable operating limits and interface characteristics of D425-2DP/PN.
Its technical profile includes drive-cliq interfaces of 4, profibus interfaces of 2 and profinet of 1 interface with 3 ports. The remaining ratings define the applicable operating limits and interface characteristics of D425-2DP/PN.
BEFORE YOU BUY
Confirm the complete D425-2DP/PN identity
ACTUAL APPLICATIONS
Application fields for D425-2DP/PN
Three broad application areas are expanded below with two related fields for D425-2DP/PN.
-
01 · MARINE & OFFSHORE
Marine Transport and Offshore Production Operations
Commercial marine transport and navigationOffshore production processing and transfer -
02 · SEMICONDUCTOR
Electronics Assembly and Semiconductor Production Operations
Electronics assembly and precision productionSemiconductor fabrication packaging and testing -
03 · TRANSPORT INFRASTRUCTURE
Rail Airport and Public Transport Operations
Rail transport and station infrastructureAirport terminals and public transportation
Technical specifications for D425-2DP/PN
-
Product ModelD425-2DP/PN
-
Product ParametersSIMOTION D425-2 DP/PN control unit
-
In stock1 unit
-
ManufacturerSiemens
-
Performance classBASIC
-
Maximum axes16
-
DRIVE-CLiQ interfaces4
-
PROFIBUS interfaces2
-
PROFINET1 interface with 3 ports
-
Ethernet interfaces2
-
Integrated drive axes6 servo, 6 vector or 12 V/f
-
Control platformSIMOTION D4x5-2
View all additional
Alternative Names
D425-2DP/PN
Siemens SIMOTION D425-2 DP/PN control unit
SIMOTION D425-2 DP/PN control unit for SIMOTION D4x5-2
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate D425-2DP/PN SIMOTION D425-2 DP/PN control unit
Install D425-2DP/PN only within the documented SIMOTION D4x5-2 architecture. Confirm performance class (BASIC) and maximum axes (16) before connection.
Match drive-cliq interfaces (4) and profibus interfaces (2) to the approved hardware design. Record connector orientation, terminal allocation, cable labels, shielding and protective earth before removal.
Check profinet (1 interface with 3 ports) together with the remaining documented limits. After installation, restore the controlled configuration and complete power-up, diagnostic and functional checks at a safe operating point.
Features:
- Exact identity: D425-2DP/PN
- Family: SIMOTION D4x5-2
- Documented connections and commissioning checks
D425-2DP/PN requires documented integration checks before energising the installation.
INTERCHANGEABILITY
Verify D425-2DP/PN before replacement
Match the complete D425-2DP/PN article identity. Similar family names or physical outlines do not establish interchangeability for the SIMOTION D4x5-2.
Compare performance class (BASIC), maximum axes (16) and drive-cliq interfaces (4) with the installed equipment and approved project records.
Preserve the installed location, connections, settings and service history before removal. After installation, inspect diagnostics and prove every affected channel, supply or communication path under the approved commissioning procedure.
Features:
- Match D425-2DP/PN exactly
- Record connections and settings before removal
- Complete controlled post-installation tests
D425-2DP/PN requires replacement verification against the installed hardware and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for D425-2DP/PN
- Official manufacturer pages matched to the article
- Directory links by subcategory and brand
Documentation for D425-2DP/PN must match the complete product identity and installed configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size5.0 x 38.0 x 23.0 cm
-
Net weight3.70 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538909100
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about D425-2DP/PN
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is D425-2DP/PN?
D425-2DP/PN is a SIMOTION D425-2 DP/PN control unit for the SIMOTION D4x5-2. -
What is the key documented rating of D425-2DP/PN?
Performance class: BASIC; Maximum axes: 16. -
Which identity should be used when ordering D425-2DP/PN?
Use the complete D425-2DP/PN marking and compare it with the installed label and documentation. -
Can a similar SIMOTION D4x5-2 item replace D425-2DP/PN?
A family name or similar appearance does not establish interchangeability; verify the complete code, interface and approved configuration. -
What should be recorded before removing D425-2DP/PN?
Record the installed position, connections, cable labels, settings and diagnostic state before removal. -
What should be inspected when D425-2DP/PN arrives?
Inspect the complete label, housing, connectors, terminals and packaging for correct identity and condition. -
Which checks follow installation of D425-2DP/PN?
Restore the approved configuration and complete controlled power-up, diagnostic and functional checks for every affected function. -
Which documentation applies to D425-2DP/PN?
Use the official manufacturer documentation for SIMOTION D4x5-2 and confirm that its scope covers the installed configuration.
READY TO VERIFY YOUR PART?
Get a D425-2DP/PN quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
D425-2DP/PNSIMOTION D425-2 DP/PN control unitManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
