PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SITOP
- 6EP1332-1SH42
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6EP1332-1SH42 LOGO!Power 24 V 2.5 A Power Supply
Siemens 6EP1332-1SH42 is a LOGO!Power regulated power supply delivering 24 V DC at 2.5 A. Its nominal single-phase input range is 100 to 240 V AC, with an 85 to 264 V operating range. The rated output power is 60 W.
The output voltage is adjustable from 22.2 to 26.4 V. Typical efficiency is 87%, and the supply has a typical current limit of 3.4 A. The data sheet specifies 40 ms mains buffering at 187 V, maximum ripple of 200 mV and maximum output spikes of 300 mV.
The output voltage is adjustable from 22.2 to 26.4 V. Typical efficiency is 87%, and the supply has a typical current limit of 3.4 A. The data sheet specifies 40 ms mains buffering at 187 V, maximum ripple of 200 mV and maximum output spikes of 300 mV.
BEFORE YOU BUY
Confirm the complete 6EP1332-1SH42 identity
ACTUAL APPLICATIONS
Application fields for 6EP1332-1SH42
These broad application fields reflect the documented function and technical characteristics of 6EP1332-1SH42.
-
01 · WATER & WASTEWATER
Industrial Water and Wastewater Treatment
Industrial water treatment and wastewater reclamationWater reclamation and municipal wastewater treatment -
02 · POWER GENERATION
Renewable Power and Conventional Electricity
Renewable power and conventional electricity generationIndustrial energy integration and hydroelectric generation -
03 · PULP & PAPER
Pulp, Paper and Thermal Electricity
Pulp and paper and thermal electricityPulp and industrial wastewater and water
Technical specifications for 6EP1332-1SH42
-
Product Model6EP1332-1SH42
-
Product ParametersLOGO!Power 24 V 2.5 A Power Supply
-
In stock1 unit
-
ManufacturerSiemens
-
Nominal AC input100 to 240 V
-
Operating AC input85 to 264 V
-
Input frequency47 to 63 Hz
-
Input current at 120 V1.22 A
-
Input current at 230 V0.66 A
-
Inrush current30 A
-
Rated DC output24 V
-
Rated output current2.5 A
-
Rated output power60 W
-
Voltage adjustment22.2 to 26.4 V
-
Maximum ripple200 mV
-
Maximum output spikes300 mV
-
Typical efficiency87%
-
Typical power loss9 W
-
Mains buffering at 187 V40 ms
View all additional
Alternative Names
6EP1332-1SH42
LOGO!Power
LOGO!Power 24 V 2.5 A Power Supply
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6EP1332-1SH42 within LOGO!Power
Connect the LOGO!Power supply to an AC feeder within its rated input conditions and the documented external protection arrangement. The 47 to 63 Hz frequency range applies to the AC input, while the output supplies regulated DC to the connected loads.
Set the voltage between 22.2 and 26.4 V as required by the loads and distribution losses. Keep the continuous demand within the 2.5 A rating; the typical 3.4 A current limit is not an additional continuous output rating.
Use the appropriate enclosure and installation spacing for this IP20, class II supply. Where parallel operation is intended, follow the manufacturer arrangement for up to two units rather than simply connecting unmatched supplies together.
Features:
- Nominal AC input: 100 to 240 V
- Operating AC input: 85 to 264 V
- LOGO!Power
Use 6EP1332-1SH42 only within the documented LOGO!Power arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace 6EP1332-1SH42 within LOGO!Power
Record the complete 6EP1332-1SH42 identifier and the measured output setting before replacement. Match the 24 V, 2.5 A configuration, since other LOGO!Power units have different output ratings.
Isolate the AC input and any other connected DC sources before removing the supply. Identify the input and output conductors and inspect the mounting and terminal condition under the applicable electrical installation procedure.
Set and verify the output voltage on the replacement before reconnecting sensitive loads. Check the loaded voltage and normal restart behavior, including any parallel supply arrangement, before returning the DC circuit to service.
Features:
- 6EP1332-1SH42 complete order code
- Mains buffering at 187 V: 40 ms
- Retain the documented LOGO!Power connection arrangement
Use 6EP1332-1SH42 only within the documented LOGO!Power arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for 6EP1332-1SH42
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for 6EP1332-1SH42 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size7.20 x 9.00 x 5.50 cm
-
Net weight0.25 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504401990
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6EP1332-1SH42
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What continuous output is rated for 6EP1332-1SH42?
6EP1332-1SH42 supplies 24 V DC at 2.5 A, with a 60 W output rating. -
Can the output setting of 6EP1332-1SH42 be adjusted?
Yes. 6EP1332-1SH42 has a 22.2 to 26.4 V adjustment range. -
Is 6EP1332-1SH42 limited to nominal 230 V AC input?
No. 6EP1332-1SH42 has a nominal 100 to 240 V AC input range and an 85 to 264 V operating range. -
Does the 6EP1332-1SH42 3.4 A current limit increase its continuous rating?
No. The typical current limit of 6EP1332-1SH42 is separate from its 2.5 A rated continuous output. -
Which mains-buffering value is stated for 6EP1332-1SH42?
6EP1332-1SH42 lists 40 ms buffering at an input voltage of 187 V. -
Can two 6EP1332-1SH42 supplies be used in parallel?
The 6EP1332-1SH42 data sheet allows two units in the documented parallel arrangement; installation instructions must be followed. -
What output detail should a 6EP1332-1SH42 RFQ retain?
Specify 6EP1332-1SH42 and the 24 V, 2.5 A rating so another LOGO!Power output variant is not substituted. -
What condition information is useful when sourcing 6EP1332-1SH42?
Request 6EP1332-1SH42 with legible identification and serviceable terminals, and state whether any mounting accessories are required.
READY TO VERIFY YOUR PART?
Get a 6EP1332-1SH42 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6EP1332-1SH42LOGO!Power 24 V 2.5 A Power SupplyManufacturer: SiemensView Details
-
6SE6400-2FA00-6AD0Six-Ampere Three-Phase Line FilterManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
