PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SITOP
- 6EP3334-8SB00-0AY0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Delivery
- Free express airfreight on qualifying orders. DHL, FedEx and UPS options available; tracking is issued on the day the parcel leaves our warehouse.
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Stable 24 V control power for demanding machines
Siemens 6EP3334-8SB00-0AY0 is a SITOP PSU8200 single-phase stabilized power supply rated at 24 V DC and 10 A. Its 120/230 V AC input uses automatic selection between the documented 85–132 V and 170–264 V ranges.
The output can be adjusted from 24 to 28.8 V DC with the applicable current derating. Brief overload reserves support load starting and protective-device operation; confirm the load profile, line protection and mounting clearances before commissioning.
The output can be adjusted from 24 to 28.8 V DC with the applicable current derating. Brief overload reserves support load starting and protective-device operation; confirm the load profile, line protection and mounting clearances before commissioning.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where SITOP PSU8200 supports industrial control power
Select the 24 V / 10 A model according to the actual load profile, supply conditions and protection design.
-
01 · MACHINE AUTOMATION
24 V control-circuit supply
Provide stabilized DC power in complex machines and plant control cabinets within the documented output rating. -
02 · LOAD STARTING
Brief overload support
Use the specified Extra Power reserve for short load-starting demands while observing duration and derating limits. -
03 · PROTECTIVE CIRCUITS
Downstream protection coordination
Coordinate the short Power Boost pulse with appropriately selected protective devices and verified branch wiring.
Technical specifications for 6EP3334-8SB00-0AY0
-
Product Model6EP3334-8SB00-0AY0
-
Product ParametersSITOP PSU8200 stabilized supply
-
In stock7 units
-
ManufacturerSiemens
-
Supply Network1-phase AC
-
Rated Input Voltage120/230 V AC
-
Input Voltage Ranges85-132 V AC; 170-264 V AC
-
Line Frequency47-63 Hz
-
Rated Output Voltage24 V DC
-
Output Adjustment Range24-28.8 V DC
-
Rated Output Current10 A
-
Active Power Output240 W typical
-
Power Boost30 A for 25 ms
-
Extra Power15 A for 5 s per minute
View all additional
Alternative Names
6EP33348SB000AY0
SITOP PSU8200 24 V 10 A
PSU8200 1AC 24VDC 10A
Technical notes
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SITOP PSU8200 POWER SYSTEM
Coordinate input, output and protective devices
Connect this single-phase power supply only within its documented AC input ranges. Automatic range selection does not imply a continuous input range between 132 V and 170 V.
Set the output for the connected 24 V loads and apply the specified current derating when increasing output voltage or operating at reduced input voltage or elevated temperature.
Use the documented DIN rail and maintain the required ventilation clearances. Select protective devices and conductors for the installation and verify the DC status signal after commissioning.
Features:
- Check AC supply, protective earth and line protection
- Confirm output voltage, load and overload profile
- Verify ventilation and DC status indication
The Siemens 6EP3334-8SB00-0AY0 SITOP PSU8200 power supply requires AC input conditions, load profile and protection design to be confirmed before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete article number and the 24 V / 10 A rating. A different SITOP output rating or input configuration requires a new compatibility check.
Record the output potentiometer setting, operating-mode switches, terminal assignments and status-signal connections before removing the existing unit.
After replacement, verify protective earth, polarity, conductor security and output voltage under load. Confirm the intended response to overload and downstream protection operation.
Features:
- Match input ranges and 24 V / 10 A output
- Retain the documented switch and output settings
- Verify load operation and status signaling
The Siemens 6EP3334-8SB00-0AY0 SITOP PSU8200 power supply requires replacement verification based on the article number, electrical ratings, wiring and operating settings before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Applicable Siemens data and installation references are confirmed before order
- Circuit design and protection coordination remain the customer's responsibility
- Accessories are supplied only when listed in the quotation
Documentation for the Siemens 6EP3334-8SB00-0AY0 SITOP PSU8200 power supply must be matched to the article number and installed power circuit; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size5.5x13.2x13.5cm
-
Shipping weight1kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504.40
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6EP3334-8SB00-0AY0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What output does 6EP3334-8SB00-0AY0 provide?
Siemens rates this exact SITOP PSU8200 article for a 24 V DC, 10 A output. -
Which AC supplies can feed this power supply?
It uses automatic range selection for 120/230 V AC, with documented input ranges of 85-132 V and 170-264 V AC. -
Can its output voltage be adjusted?
Yes. Siemens specifies an adjustment range from 24 V to 28.8 V DC using the front potentiometer. -
What brief overload reserve is available?
Power Boost provides 30 A for 25 ms during operation. Extra Power provides 15 A for 5 seconds per minute; these are brief reserves, not continuous output ratings. -
May two units be connected in parallel?
Siemens permits two devices in parallel for increased power when the documented switchable characteristic and wiring requirements are followed. -
What should be checked before replacing this unit?
Record the full article number, input protection, output setting, connected load, conductor sizes, terminal assignments and DIN-rail clearances. -
When must the available output current be derated?
The operating instructions specify derating above 24 V output, at low input voltage and above 60 degrees C. Apply the exact voltage and temperature derating rules when sizing the connected load. -
How long is the documented mains buffering time?
The minimum buffering time is 35 ms at rated output current with a 120/230 V input. Longer outage protection requires a separately selected buffer or DC UPS arrangement.
READY TO VERIFY YOUR PART?
Get a 6EP3334-8SB00-0AY0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
