PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic HMI
- 6AV3607-1JC20-0AX2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6AV3607-1JC20-0AX2 SIMATIC OP7 operator panel
Siemens 6AV3607-1JC20-0AX2 is a SIMATIC OP7 operator panel in the SIMATIC HMI operator panels. The article-specific data identifies its control role, communication or signal interface and installed system compatibility. Confirm the complete nameplate, electrical class, revision, companion equipment and controlled configuration before ordering.
BEFORE YOU BUY
Confirm the complete SIMATIC OP7 operator panel
ACTUAL APPLICATIONS
Application context for 6AV3607-1JC20-0AX2
Manufacturer documentation places the SIMATIC OP7 operator panel in practical hmi applications. The three cases below describe different operating tasks in which 6AV3607-1JC20-0AX2 performs its documented product-family role with the configured companion equipment.
-
01 · CHEMICAL & PETROCHEMICAL
Support reactor charging with Simatic Op7 process control
During operation of the feed valves, vessels and agitators, 6AV3607-1JC20-0AX2 supports the configured automation role as a SIMATIC OP7 operator panel. During batch initiation, the system uses this function to sequence the material path against vessel readiness, helping it begin the reaction from a verified state. -
02 · PLASTICS & PACKAGING
Maintain form-fill-seal with Simatic Op7 process control
For the coordinated operation of the film feed, sealing jaws and discharge belts, 6AV3607-1JC20-0AX2 operates in its approved product-family role as a SIMATIC OP7 operator panel. During speed ramp, the system uses this function to correct material position before sealing or cutting, helping it keep seals and cuts aligned with the product. -
03 · WATER & WASTEWATER
Synchronize chemical dosing with Simatic Op7 process control
As part of the metering pumps and contact tanks, 6AV3607-1JC20-0AX2 supports the configured automation role as a SIMATIC OP7 operator panel. During dose-setpoint correction, the system uses this function to match reagent flow to the measured process load, helping it keep treatment chemistry inside its operating target.
Technical specifications for 6AV3607-1JC20-0AX2
-
Product Model6AV3607-1JC20-0AX2
-
Product ParametersSIMATIC OP7 operator panel
-
In stock1 unit
-
ManufacturerSiemens
-
Exact Article Code6AV3607-1JC20-0AX2
-
Product ClassSimatic Op7 Operator Panel
-
Product FamilySIMATIC HMI operator panels
-
Display Technology4-line LCD
-
Display Resolution20 characters per line
-
Color CapabilityMonochrome
-
User MemoryConfiguration memory
-
Communication PortsMPI / PROFIBUS
-
Operator InputResistive touch / function keys
-
Supply Class24 V DC
-
Configuration SoftwareSIMATIC WinCC
-
Recipe SupportPersistent recipe records
-
Alarm SystemMessage buffer and acknowledgement
-
Front ProtectionIP65 installed
View all additional
Alternative Names
6AV3607 1JC20 0AX2
Siemens SIMATIC OP7 operator panel
SIMATIC HMI operator panels SIMATIC OP7 operator panel
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6AV3607-1JC20-0AX2 to the installed SIMATIC HMI operator panels
Siemens 6AV3607-1JC20-0AX2 is a SIMATIC OP7 operator panel for the SIMATIC HMI operator panels. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare display technology (4-line LCD), display resolution (20 characters per line) and color capability (Monochrome) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6AV3607-1JC20-0AX2
- Product class: SIMATIC OP7 operator panel
- Family: SIMATIC HMI operator panels
The Siemens 6AV3607-1JC20-0AX2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6AV3607-1JC20-0AX2 identity before exchange
Replace 6AV3607-1JC20-0AX2 only after matching the complete article code, SIMATIC OP7 operator panel, installed SIMATIC HMI operator panels role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6AV3607-1JC20-0AX2
- Product class: SIMATIC OP7 operator panel
- Family check: SIMATIC HMI operator panels
The Siemens 6AV3607-1JC20-0AX2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 6AV3607-1JC20-0AX2
- Product family: SIMATIC HMI operator panels
- Exact Siemens identity required before service
Documentation for Siemens 6AV3607-1JC20-0AX2 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size24 × 11 × 4.5 cm
-
Shipping weight1.00 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6AV3607-1JC20-0AX2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What service evidence should be retained after work on 6AV3607-1JC20-0AX2?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for 6AV3607-1JC20-0AX2. -
Which nameplate details identify the correct 6AV3607-1JC20-0AX2 for a distributor quotation?
Quote 6AV3607-1JC20-0AX2 with the complete suffix, SIMATIC OP7 operator panel, SIMATIC HMI operator panels, quantity and clear nameplate photographs. -
What should engineering compare before integrating 6AV3607-1JC20-0AX2 into the installed system?
Compare the documented SIMATIC HMI operator panels role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to 6AV3607-1JC20-0AX2?
Inspect the 6AV3607-1JC20-0AX2 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same SIMATIC HMI operator panels family directly replace 6AV3607-1JC20-0AX2?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing 6AV3607-1JC20-0AX2?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting 6AV3607-1JC20-0AX2. -
Which configuration data should be backed up before exchanging 6AV3607-1JC20-0AX2?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission 6AV3607-1JC20-0AX2 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected SIMATIC OP7 operator panel function at a safe operating point.
READY TO VERIFY YOUR PART?
Get a 6AV3607-1JC20-0AX2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
