PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic Net
- 6GK7343-1GX11-0XE0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GK7343-1GX11-0XE0 CP 343-1 Advanced processor
Siemens 6GK7343-1GX11-0XE0 is a CP 343-1 Advanced processor in the SIMATIC NET S7-300. It is used to execute the configured control logic, sequencing and equipment interlocks.
Its documented configuration includes processor family of CP 343-1 Advanced, controller platform of SIMATIC S7-300, network interface of Industrial Ethernet, and communication services of S7, TCP/IP and ISO-on-TCP. During operation, the CP 343-1 Advanced processor processes the configured program and coordinates the connected I/O, communication and control functions.
Its documented configuration includes processor family of CP 343-1 Advanced, controller platform of SIMATIC S7-300, network interface of Industrial Ethernet, and communication services of S7, TCP/IP and ISO-on-TCP. During operation, the CP 343-1 Advanced processor processes the configured program and coordinates the connected I/O, communication and control functions.
BEFORE YOU BUY
Confirm the complete CP 343-1 Advanced processor
ACTUAL APPLICATIONS
Where 6GK7343-1GX11-0XE0 Fits Across Industrial Application Areas
Applications span food processing, water utilities and automotive production, subject to compatible equipment, interfaces and the installed configuration.
-
01 · FOOD & BEVERAGE
Food Processing, Beverage Production and Packaging Facilities
Beverage blending tanks and filling lines in bottling plants.Ingredient preparation and packaging lines in food processing plants. -
02 · WATER & WASTEWATER
Water Supply and Municipal Wastewater Treatment Facilities
Raw water pumping stations and municipal sewage treatment plants.Drinking water treatment facilities and wastewater collection pumping stations. -
03 · AUTOMOTIVE MANUFACTURING
Automotive Component Production and Factory Assembly Lines
Electronic component assembly cells in automotive parts manufacturing plants.Sensor and actuator production lines in automotive component factories.
Technical specifications for 6GK7343-1GX11-0XE0
-
Product Model6GK7343-1GX11-0XE0
-
Product ParametersCP 343-1 Advanced processor
-
In stock1 unit
-
ManufacturerSiemens
-
Processor FamilyCP 343-1 Advanced
-
Controller PlatformSIMATIC S7-300
-
Network InterfaceIndustrial Ethernet
-
Communication ServicesS7, TCP/IP and ISO-on-TCP
-
PROFINET RolePROFINET IO controller
-
Web DiagnosticsIntegrated
-
Configuration StorageC-PLUG support
-
Module ClassAdvanced communication processor
View all additional
Alternative Names
6GK7343-1GX11-0XE0
6GK7343 1GX11 0XE0
SIMATIC NET S7-300 CP 343-1 Advanced processor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6GK7343-1GX11-0XE0 to the installed SIMATIC NET S7-300
Siemens 6GK7343-1GX11-0XE0 is a CP 343-1 Advanced processor for the SIMATIC NET S7-300. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare communication services (S7, TCP/IP and ISO-on-TCP), profinet role (PROFINET IO controller) and web diagnostics (Integrated) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6GK7343-1GX11-0XE0
- Product class: CP 343-1 Advanced processor
- Family: SIMATIC NET S7-300
The Siemens 6GK7343-1GX11-0XE0 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6GK7343-1GX11-0XE0 identity before exchange
Replace 6GK7343-1GX11-0XE0 only after matching the complete article code, CP 343-1 Advanced processor, installed SIMATIC NET S7-300 role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6GK7343-1GX11-0XE0
- Product class: CP 343-1 Advanced processor
- Family check: SIMATIC NET S7-300
The Siemens 6GK7343-1GX11-0XE0 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6GK7343-1GX11-0XE0
- Product family: SIMATIC NET S7-300
- Exact Siemens identity required before service
Documentation for Siemens 6GK7343-1GX11-0XE0 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size18.0 x 15.0 x 6.0 cm
-
Shipping weight0.50 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GK7343-1GX11-0XE0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which processor family confirms the correct 6GK7343-1GX11-0XE0?
Match the complete 6GK7343-1GX11-0XE0 label and verify processor family is CP 343-1 Advanced before accepting the CP 343-1 Advanced processor. -
What must engineering check around controller platform?
For 6GK7343-1GX11-0XE0, compare controller platform (SIMATIC S7-300) with the installed wiring, host hardware and controlled project. -
Can another SIMATIC NET S7-300 article replace this unit?
Do not select a substitute from appearance alone. Compare 6GK7343-1GX11-0XE0, processor family, controller platform, connectors, firmware and the saved configuration. -
Which records protect the existing network interface setup?
Before removing 6GK7343-1GX11-0XE0, photograph labels and connections, then save configuration evidence associated with network interface (Industrial Ethernet). -
How should the CP 343-1 Advanced processor be inspected on arrival?
Inspect 6GK7343-1GX11-0XE0 for the exact article marking, connector damage, bent hardware, missing accessories and transport damage before disturbing the installed spare. -
Which functional test follows the 6GK7343-1GX11-0XE0 exchange?
Restore the approved setup, review diagnostics and test the affected SIMATIC NET S7-300 signal, network, control or drive path at a safe operating point. -
What data should a distributor quote for this configuration?
Provide 6GK7343-1GX11-0XE0, quantity, nameplate photographs, installed SIMATIC NET S7-300 system, required interfaces and destination country. -
How can MRO avoid receiving the wrong hardware revision?
Ask the supplier to confirm the full 6GK7343-1GX11-0XE0 identity, visible revision, processor family and connector layout against photographs before shipment.
READY TO VERIFY YOUR PART?
Get a 6GK7343-1GX11-0XE0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
