PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic Net
- 6GT2801-2AB10
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GT2801-2AB10 RF340R industrial RFID reader
Siemens 6GT2801-2AB10 is a SIMATIC RF340R industrial RFID reader with an integrated 13.56 MHz antenna. It communicates through RS422 and supports RF300 as well as ISO 15693 transponders.
The IP67 reader provides up to 140 mm of documented reading range and operates from -25 to +70 °C. Antenna clearance, transponder type, cable, serial parameters and the connected communication module must match the RF installation.
The IP67 reader provides up to 140 mm of documented reading range and operates from -25 to +70 °C. Antenna clearance, transponder type, cable, serial parameters and the connected communication module must match the RF installation.
BEFORE YOU BUY
Confirm the complete RF340R industrial RFID reader
ACTUAL APPLICATIONS
Application fields for 6GT2801-2AB10
Three broad application areas relevant to 6GT2801-2AB10 are expanded below with two concise fields under each heading.
-
01 · INDUSTRIAL MANUFACTURING
Discrete and Continuous Manufacturing
Discrete manufacturing and assembly productionContinuous industrial production processes -
02 · WAREHOUSING AND LOGISTICS
Warehousing and Distribution Operations
Warehouse distribution and order fulfilmentLogistics centres and supply-chain handling -
03 · AUTOMOTIVE MANUFACTURING
Vehicle and Component Manufacturing
Vehicle assembly and transportation productionAutomotive component and electronics manufacturing
Technical specifications for 6GT2801-2AB10
-
Product Model6GT2801-2AB10
-
Product ParametersRF340R industrial RFID reader
-
In stock1 unit
-
ManufacturerSiemens
-
Reader designationRF340R
-
Operating frequency13.56 MHz
-
InterfacesRS422
-
ProtocolsRF300 and ISO 15693
-
Maximum transmission rate106 kbit/s RF
-
Serial transmission rate115.2 kbit/s
-
Maximum reading range140 mm
-
Protection ratingIP67
-
Operating temperature-25 to +70 °C
-
ConnectorM12, 8-pin
-
Supply voltage24 V DC
-
AntennaIntegrated
-
Housing constructionIndustrial compact reader
-
RF standardISO 15693
-
Fieldbus connectionRS422 serial link
View all additional
Alternative Names
6GT2801-2AB10
Siemens 6GT2801-2AB10
SIMATIC RF300 RF340R industrial RFID reader
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6GT2801-2AB10 within the documented SIMATIC RF300 configuration
Install 6GT2801-2AB10 only in a compatible SIMATIC RF300 configuration. Confirm reader designation (RF340R) and operating frequency (13.56 MHz) before connection.
Record the installed slot, terminal allocation, connector orientation, field wiring and every configured address or range. Preserve shielding, protective-earth and supply arrangements from the approved documentation.
After installation, restore the controlled project or parameter set. Review diagnostics and prove every affected input, output, drive function or communication path before returning the application to service.
Features:
- Exact 6GT2801-2AB10 identity
- Verified SIMATIC RF300 compatibility
- Controlled configuration and functional testing
6GT2801-2AB10 requires the documented electrical, mechanical and configuration conditions before energising the installation.
INTERCHANGEABILITY
Verify 6GT2801-2AB10 before replacement
Match the full 6GT2801-2AB10 order code. Similar family names or physical outlines do not confirm interchangeability with this RF340R industrial RFID reader.
Compare the documented interfaces (RS422) and protocols (RF300 and ISO 15693) with the installed article. Record firmware, hardware revision and removable media where applicable.
Back up the approved program or parameters, label all connections and retain the original configuration record. After replacement, inspect diagnostics and complete controlled functional tests before release to operation.
Features:
- Complete article and revision identity
- Recorded wiring, settings and installed configuration
- Post-installation diagnostics and functional test
Replacement of 6GT2801-2AB10 requires verification against the installed hardware, project and manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for 6GT2801-2AB10
- Applicable Siemens documentation
- Directory links by subcategory and brand
Documentation for 6GT2801-2AB10 must match the complete installed product identity and approved configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size5.9 × 3.1 × 20.9 cm
-
Net weight0.22 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8471900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GT2801-2AB10
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the documented function of 6GT2801-2AB10?
6GT2801-2AB10 is a RF340R industrial RFID reader for the SIMATIC RF300 platform. -
Which complete identity should be used when ordering 6GT2801-2AB10?
Use the full 6GT2801-2AB10 marking, including every suffix, and match it to the installed label and documentation. -
Which primary rating should engineers verify for 6GT2801-2AB10?
Verify reader designation (RF340R) and operating frequency (13.56 MHz) against the installed configuration. -
Can a similar SIMATIC RF300 item directly replace 6GT2801-2AB10?
Not by family name alone. Confirm interfaces, electrical ratings, firmware or hardware revision, terminal assignment and project compatibility. -
What should maintenance record before removing 6GT2801-2AB10?
Record the full label, installed position, wiring, connector orientation, configuration, status indications and diagnostic state. -
Which checks are required after installing 6GT2801-2AB10?
Complete controlled power-up, diagnostic review and functional verification of every affected signal or communication path. -
What should a distributor request for a 6GT2801-2AB10 quotation?
Request the full model, quantity, clear nameplate photographs, destination, required delivery date and any installed revision information. -
What should an MRO buyer confirm in the supplied scope for 6GT2801-2AB10?
Confirm the exact article identity, condition, included accessories, documentation, lead time and warranty before accepting the quotation.
READY TO VERIFY YOUR PART?
Get a 6GT2801-2AB10 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6GT2801-2AB10RF340R industrial RFID readerManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
