PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E30947477 Industrial PC DC Power Supply
Siemens A5E30947477 is the CV5/4 industrial DC power-supply spare for the documented SIMATIC IPC configuration. The manufacturer identifies a 24 V DC, 150 W unit in revision H3 for selected IPC627B/C, IPC827B/C, IPC677B/C and IPC577B/C assemblies.
The supply converts the external DC input into internal PC power rails. Third-party H3 data identifies 3.3 V, 5.1 V and 12 V outputs with respective current capacities of 8.5 A, 16.5 A and 6.5 A. The rail ratings are subject to the unit’s total power limit; host, connector allocation and hardware revision must match the installed computer.
The supply converts the external DC input into internal PC power rails. Third-party H3 data identifies 3.3 V, 5.1 V and 12 V outputs with respective current capacities of 8.5 A, 16.5 A and 6.5 A. The rail ratings are subject to the unit’s total power limit; host, connector allocation and hardware revision must match the installed computer.
BEFORE YOU BUY
Confirm the complete industrial pc dc power supply
ACTUAL APPLICATIONS
Application context for A5E30947477
A5E30947477 supplies compatible industrial computers used in manufacturing, production visualisation and process automation. The exact IPC assembly and H3 revision determine suitability. Check the input supply, internal connector allocation and total load against the installed computer configuration.
-
01 · INDUSTRIAL MANUFACTURING
Industrial Production and Manufacturing Processes
Industrial Manufacturing Process ControlAssembly Production and Automation -
02 · FOOD & BEVERAGE
Food Manufacturing and Beverage Production
Food Processing and PackagingBeverage Manufacturing and Production -
03 · WATER & WASTEWATER
Water Treatment and Process Monitoring
Water Supply Process ManagementWastewater Treatment and Processing
Technical specifications for A5E30947477
-
Product ModelA5E30947477
-
Product ParametersIndustrial PC DC Power Supply
-
In stock6 units
-
ManufacturerSiemens
-
Rated input voltage24 V DC
-
Maximum total output power150 W
-
3.3 V output rail3.3 V DC; 8.5 A
-
5.1 V output rail5.1 V DC; 16.5 A
-
12 V output rail12 V DC; 6.5 A
View all additional
Alternative Names
A5E30947477
SIMATIC IPC CV5/4 H3 DC power supply
24 V 150 W industrial PC supply
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate A5E30947477 industrial pc dc power supply
Identify the supported SIMATIC IPC assembly and the CV5/4 H3 power-supply execution. Compare the complete unit label and connector allocation with the computer service documentation.
Verify the 24 V DC input and the internal rail load requirements. Do not add individual maximum rail powers as if they could exceed the 150 W total output rating.
Use the applicable IPC service procedure for fitting and testing the supply. Validate power-up, internal connectors and computer diagnostics before accepting operation.
Features:
- Rated input voltage: 24 V DC
- Maximum total output power: 150 W
- 3.3 V output rail: 3.3 V DC; 8.5 A
The A5E30947477 industrial pc dc power supply requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify A5E30947477 industrial pc dc power supply
Match A5E30947477 and its H3 execution to the installed IPC power-supply label. Other revisions and host assemblies require a documented compatibility check.
Record connector positions, input wiring and installed PC components. Preserve the software configuration and follow the host computer isolation procedure before removal.
Fit the verified supply and check computer startup and supply behaviour. Restore only the accepted host configuration and retain the service test record.
Features:
- Rated input voltage: 24 V DC
- Maximum total output power: 150 W
- 3.3 V output rail: 3.3 V DC; 8.5 A
The A5E30947477 industrial pc dc power supply requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the A5E30947477 industrial pc dc power supply must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size13 × 10.8 × 6.2cm
-
Shipping weight0.38kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504401400
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E30947477
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What input and total power does the official spare listing identify?
The manufacturer listing specifies 24 V DC input and 150 W for the CV5/4 H3 supply. -
Which internal rails are identified by H3 third-party data?
The published H3 values are 3.3 V/8.5 A, 5.1 V/16.5 A and 12 V/6.5 A. Verify the supplied unit label and total loading. -
Can the maximum rail powers be added without a combined limit?
No. The supply has a 150 W total rating; rail maxima do not establish unrestricted simultaneous loading. -
Which IPC families are named in the official spare description?
The listing names selected IPC627B/C, IPC827B/C, IPC677B/C and IPC577B/C assemblies. Confirm the complete host execution before fitting. -
Is a different hardware revision automatically interchangeable?
No. Compare the revision, connector arrangement and supported host configuration against the installed unit. -
Does this spare include the complete industrial computer?
No. The identified item is the internal power-supply spare. Computer hardware and other accessories must be listed separately in the quotation. -
What label details are needed for an IPC supply quotation?
Provide A5E30947477, revision, CV5/4 designation and the complete IPC order code or power-supply label photograph. -
What should be inspected on receipt of this DC supply?
Check the article and revision, internal connectors and case condition, then compare the supplied execution with the computer service record.
READY TO VERIFY YOUR PART?
Get a A5E30947477 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
-
RFC 430 ETH-IB 2730190RFC 430 ETH-IB Remote Field ControllerManufacturer: Phoenix ContactView Details
-
-
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
