PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S5
- 6ES5948-3UR23
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES5948-3UR23 SIMATIC S5 central processing unit
Siemens 6ES5948-3UR23 is a SIMATIC S5 central processing unit in the SIMATIC S5 automation systems. It is used to perform the assigned signal, control or interface function in the installed equipment.
Its documented configuration includes rated supply of 24 V DC, mounting of Control cabinet, protection class of IP20, and system interface of Backplane bus. During operation, the SIMATIC S5 central processing unit performs its assigned SIMATIC S5 central processing unit function through the documented power, signal and communication interfaces.
Its documented configuration includes rated supply of 24 V DC, mounting of Control cabinet, protection class of IP20, and system interface of Backplane bus. During operation, the SIMATIC S5 central processing unit performs its assigned SIMATIC S5 central processing unit function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete SIMATIC S5 central processing unit
ACTUAL APPLICATIONS
Application context for 6ES5948-3UR23
Manufacturer documentation places the Simatic S5 Central Processing Unit in practical automation applications. The three cases below describe different operating tasks in which 6ES5948-3UR23 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Supervise chemical dosing with Simatic S5 process control
In the automation chain for the metering pumps and contact tanks, 6ES5948-3UR23 performs its assigned control role as a Simatic S5 Central Processing Unit. During dose-setpoint correction, the system uses this function to match reagent flow to the measured process load, helping it keep treatment chemistry inside its operating target. -
02 · AUTOMOTIVE
Coordinate robotic joining with Simatic S5 process control
For the coordinated operation of the robots, fixtures and clamp groups, 6ES5948-3UR23 operates in its approved product-family role as a Simatic S5 Central Processing Unit. During station restart, the system uses this function to confirm tooling readiness before the cycle starts, helping it prevent an incomplete joining cycle. -
03 · MACHINERY MANUFACTURING
Synchronize test-stand control during test-point transition
At the control layer of the load actuators and measurement channels, 6ES5948-3UR23 operates in its approved product-family role as a Simatic S5 Central Processing Unit. During test-point transition, the system uses this function to move the test article through commanded operating points, helping it capture comparable results at each condition.
Technical specifications for 6ES5948-3UR23
-
Product Model6ES5948-3UR23
-
Product ParametersSIMATIC S5 central processing unit
-
In stock1 unit
-
ManufacturerSiemens
-
Rated Supply24 V DC
-
MountingControl cabinet
-
Protection ClassIP20
-
System InterfaceBackplane bus
-
ConfigurationManufacturer engineering tool
-
Operating ModeContinuous duty
-
ConnectionKeyed industrial connector
-
Diagnostic StateStatus indicators
-
CommissioningControlled functional test
-
InstallationRack module
View all additional
Alternative Names
6ES5948 3UR23
SIMATIC S5 automation systems SIMATIC S5 central processing unit
Siemens SIMATIC S5 central processing unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6ES5948-3UR23 to the installed SIMATIC S5 automation systems
Siemens 6ES5948-3UR23 is a SIMATIC S5 central processing unit used in the SIMATIC S5 automation systems. Use 6ES5948-3UR23 for cyclic logic, program execution and distributed I/O coordination in the documented SIMATIC S5 automation systems. Preserve the approved hardware configuration and program backup.
Maintain the documented network names, addresses, topology and controller interfaces assigned to 6ES5948-3UR23. Validate reachable devices before enabling controlled equipment. Confirm configuration (Manufacturer engineering tool), operating mode (Continuous duty), the exact mechanical position and approved system configuration before connection.
Load the approved project to 6ES5948-3UR23, review diagnostics and test interlocks, I/O updates, alarms and commanded sequences before returning the plant section to service. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 6ES5948-3UR23
- Product class: SIMATIC S5 central processing unit
- Family: SIMATIC S5 automation systems
The Siemens 6ES5948-3UR23 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6ES5948-3UR23 identity before exchange
Replace 6ES5948-3UR23 only after matching the full article identity, SIMATIC S5 central processing unit, protection class (IP20) and documented system role. Confirm that the installed hardware version and controlled configuration agree with the manufacturer record.
Before removal, photograph the product label, mounting position, diagnostic state (Status indicators), cable routing, shields, earth connections and adjacent assemblies. Preserve the approved program, parameter set or network configuration needed for recovery.
After installation, verify commissioning (Controlled functional test) and installation (Rack module). Review diagnostics, test the affected function at a safe operating point and record the final maintenance acceptance evidence.
Features:
- Exact identity: 6ES5948-3UR23
- Diagnostic State: Status indicators
- Installation: Rack module
The Siemens 6ES5948-3UR23 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 6ES5948-3UR23
- Installation checks matched to SIMATIC S5 automation systems
- Exact Siemens identity required before service
Documentation for Siemens 6ES5948-3UR23 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size21.3 × 26.6 × 3.3 cm
-
Shipping weight0.463 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES5948-3UR23
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which rated supply value must match when sourcing 6ES5948-3UR23?
6ES5948-3UR23 is documented with Rated Supply 24 V DC. Compare this value, the full order number and installed system record before purchase. -
How should engineering verify mounting for 6ES5948-3UR23?
Use the manufacturer data and installed configuration to confirm Mounting Control cabinet; retain the checked value in the replacement work pack. -
What does protection class IP20 mean for installing 6ES5948-3UR23?
The installation must satisfy Protection Class IP20 together with the documented power, interface, mounting and environmental limits for 6ES5948-3UR23. -
Which compatibility records should accompany a distributor quote for 6ES5948-3UR23?
Provide the complete model, quantity, nameplate photos, installed SIMATIC S5 automation systems, required interfaces and destination country. Include project or network records when relevant. -
Can 6ES5948-3UR23 replace a similar SIMATIC S5 central processing unit without configuration changes?
Do not decide by appearance. Match the full order number, hardware or firmware level, System Interface Backplane bus, interfaces and approved project before exchange. -
What should receiving inspection check on 6ES5948-3UR23 before installation?
Check the exact label, housing, connectors, terminals, mounting points and supplied accessories. Reject damage, contamination, bent pins or unreadable identification. -
Which connection evidence should maintenance capture before removing 6ES5948-3UR23?
Photograph connector keying, cable destinations, port assignments, shields, protective earth and adjacent modules. Save the controlled configuration and current diagnostics. -
What commissioning result confirms 6ES5948-3UR23 is ready for service?
Confirm normal diagnostics, communication and affected equipment response, then test the documented SIMATIC S5 central processing unit function under controlled conditions and record acceptance.
READY TO VERIFY YOUR PART?
Get a 6ES5948-3UR23 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
