PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES5300-5CA11 IM 300-5 central interface module
Siemens 6ES5300-5CA11 is an IM 300-5 central interface module for SIMATIC S5 rack configurations. It couples a compatible S5 central controller to EG 184U or EG 187U expansion units through the corresponding IM 312-5 interface.
The documented central coupling uses the specified S5 interface cable and is limited by the rack architecture and total cable length. Central rack slot, expansion-unit type and companion interface must be confirmed before replacement.
The documented central coupling uses the specified S5 interface cable and is limited by the rack architecture and total cable length. Central rack slot, expansion-unit type and companion interface must be confirmed before replacement.
BEFORE YOU BUY
Confirm the complete IM 300-5 central interface module
ACTUAL APPLICATIONS
Application fields for 6ES5300-5CA11
Three broad application areas relevant to 6ES5300-5CA11 are expanded below with two concise fields under each heading.
-
01 · INDUSTRIAL MANUFACTURING
Discrete and Continuous Manufacturing
Discrete manufacturing and assembly productionContinuous industrial production processes -
02 · POWER GENERATION
Thermal, Hydroelectric and Renewable Power
Thermal and hydroelectric power productionRenewable generation and energy integration -
03 · PULP AND PAPER
Pulp, Paper and Packaging Production
Pulp and fibre productionPaper and packaging material manufacturing
Technical specifications for 6ES5300-5CA11
-
Product Model6ES5300-5CA11
-
Product ParametersIM 300-5 central interface module
-
In stock1 unit
-
ManufacturerSiemens
-
Module designationIM 300-5
-
System familySIMATIC S5
-
InstallationCentral controller
-
Compatible expansion racksEG 184U and EG 187U
-
Companion interfaceIM 312-5
-
Maximum central cable length2 m system limit
-
Bus functionParallel central coupling
-
Cable familySIMATIC S5 interface cable
-
LifecycleLegacy spare part
-
VerificationRack and companion interface required
View all additional
Alternative Names
6ES5300-5CA11
Siemens 6ES5300-5CA11
SIMATIC S5 IM 300-5 central interface module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES5300-5CA11 within the documented SIMATIC S5 configuration
Install 6ES5300-5CA11 only in a compatible SIMATIC S5 configuration. Confirm module designation (IM 300-5) and system family (SIMATIC S5) before connection.
Record the installed slot, terminal allocation, connector orientation, field wiring and every configured address or range. Preserve shielding, protective-earth and supply arrangements from the approved documentation.
After installation, restore the controlled project or parameter set. Review diagnostics and prove every affected input, output, drive function or communication path before returning the application to service.
Features:
- Exact 6ES5300-5CA11 identity
- Verified SIMATIC S5 compatibility
- Controlled configuration and functional testing
6ES5300-5CA11 requires the documented electrical, mechanical and configuration conditions before energising the installation.
INTERCHANGEABILITY
Verify 6ES5300-5CA11 before replacement
Match the full 6ES5300-5CA11 order code. Similar family names or physical outlines do not confirm interchangeability with this IM 300-5 central interface module.
Compare the documented installation (Central controller) and compatible expansion racks (EG 184U and EG 187U) with the installed article. Record firmware, hardware revision and removable media where applicable.
Back up the approved program or parameters, label all connections and retain the original configuration record. After replacement, inspect diagnostics and complete controlled functional tests before release to operation.
Features:
- Complete article and revision identity
- Recorded wiring, settings and installed configuration
- Post-installation diagnostics and functional test
Replacement of 6ES5300-5CA11 requires verification against the installed hardware, project and manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for 6ES5300-5CA11
- Applicable Siemens documentation
- Directory links by subcategory and brand
Documentation for 6ES5300-5CA11 must match the complete installed product identity and approved configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size2 × 20.4 × 25.5 cm
-
Net weight0.34 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES5300-5CA11
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the documented function of 6ES5300-5CA11?
6ES5300-5CA11 is a IM 300-5 central interface module for the SIMATIC S5 platform. -
Which complete identity should be used when ordering 6ES5300-5CA11?
Use the full 6ES5300-5CA11 marking, including every suffix, and match it to the installed label and documentation. -
Which primary rating should engineers verify for 6ES5300-5CA11?
Verify module designation (IM 300-5) and system family (SIMATIC S5) against the installed configuration. -
Can a similar SIMATIC S5 item directly replace 6ES5300-5CA11?
Not by family name alone. Confirm interfaces, electrical ratings, firmware or hardware revision, terminal assignment and project compatibility. -
What should maintenance record before removing 6ES5300-5CA11?
Record the full label, installed position, wiring, connector orientation, configuration, status indications and diagnostic state. -
Which checks are required after installing 6ES5300-5CA11?
Complete controlled power-up, diagnostic review and functional verification of every affected signal or communication path. -
What should a distributor request for a 6ES5300-5CA11 quotation?
Request the full model, quantity, clear nameplate photographs, destination, required delivery date and any installed revision information. -
What should an MRO buyer confirm in the supplied scope for 6ES5300-5CA11?
Confirm the exact article identity, condition, included accessories, documentation, lead time and warranty before accepting the quotation.
READY TO VERIFY YOUR PART?
Get a 6ES5300-5CA11 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES5300-5CA11IM 300-5 central interface moduleManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
