PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6DL3100-8AA AddFEM PROFIBUS front-end module
Siemens 6DL3100-8AA is a AddFEM PROFIBUS front-end module in the SIMADYN D and TELEPERM XP systems. It is used to exchange control and diagnostic data between the connected automation devices.
Its documented configuration includes module designation of AddFEM Type -8AA, network interface of PROFIBUS DP, control system of SIMADYN D / TXP AS 620T, and host processor of PM6 or PM5. During operation, the AddFEM PROFIBUS front-end module transfers data across the documented communication interfaces and reports the available link or diagnostic states.
Its documented configuration includes module designation of AddFEM Type -8AA, network interface of PROFIBUS DP, control system of SIMADYN D / TXP AS 620T, and host processor of PM6 or PM5. During operation, the AddFEM PROFIBUS front-end module transfers data across the documented communication interfaces and reports the available link or diagnostic states.
BEFORE YOU BUY
Confirm the complete AddFEM PROFIBUS front-end module
ACTUAL APPLICATIONS
Where 6DL3100-8AA Fits Across Major Industry Sectors
Uses span beverages, metals and mining, subject to verified compatibility, operating conditions and project requirements.
-
01 · FOOD & BEVERAGE
Commercial Beverage Brewing, Bottling and Product Packaging
Commercial beverage brewing and processing for consumer drinks production.Beverage bottling and packaging for retail and wholesale distribution. -
02 · METALS & METALWORKING
Steel Production and Commercial Aluminum Material Processing
Steel production and material processing for industrial manufacturing demand.Aluminum production and finishing for commercial nonferrous metal markets. -
03 · MINING & MINERALS
Mineral Resource Extraction and Commercial Aggregate Material Production
Mineral resource extraction and preparation for industrial material supply.Aggregate production and processing for construction material supply chains.
Technical specifications for 6DL3100-8AA
-
Product Model6DL3100-8AA
-
Product ParametersAddFEM PROFIBUS front-end module
-
In stock1 unit
-
ManufacturerSiemens
-
Product FamilySIMADYN D and TELEPERM XP systems
-
Module DesignationAddFEM Type -8AA
-
Network InterfacePROFIBUS DP
-
Control SystemSIMADYN D / TXP AS 620T
-
Host ProcessorPM6 or PM5
-
Communication ModuleCS7
-
PROFIBUS ModuleSS52
-
GSD FileSi0180A3.GSx
-
Basic FunctionCyclic I/O exchange
-
Redundancy ChangeoverSupported with fiber optic link
-
Front-End FunctionNot configurable
-
Supply Voltage24 V DC
View all additional
Alternative Names
6DL3100 8AA
Siemens AddFEM PROFIBUS front-end module
SIMADYN D and TELEPERM XP systems AddFEM PROFIBUS front-end module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6DL3100-8AA to the installed SIMADYN D and TELEPERM XP systems
Siemens 6DL3100-8AA is a AddFEM PROFIBUS front-end module for the SIMADYN D and TELEPERM XP systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare module designation (AddFEM Type -8AA), network interface (PROFIBUS DP) and control system (SIMADYN D / TXP AS 620T) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6DL3100-8AA
- Product class: AddFEM PROFIBUS front-end module
- Family: SIMADYN D and TELEPERM XP systems
The Siemens 6DL3100-8AA requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6DL3100-8AA identity before exchange
Replace 6DL3100-8AA only after matching the complete article code, AddFEM PROFIBUS front-end module, installed SIMADYN D and TELEPERM XP systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6DL3100-8AA
- Product class: AddFEM PROFIBUS front-end module
- Family check: SIMADYN D and TELEPERM XP systems
The Siemens 6DL3100-8AA requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 6DL3100-8AA
- Product family: SIMADYN D and TELEPERM XP systems
- Exact Siemens identity required before service
Documentation for Siemens 6DL3100-8AA must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size29.5 × 7.5 × 20.9 cm
-
Shipping weight2.80 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6DL3100-8AA
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should technicians commission 6DL3100-8AA after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected AddFEM PROFIBUS front-end module function at a safe operating point. -
What service evidence should be retained after work on 6DL3100-8AA?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for 6DL3100-8AA. -
Which nameplate details identify the correct 6DL3100-8AA for a distributor quotation?
Quote 6DL3100-8AA with the complete suffix, AddFEM PROFIBUS front-end module, SIMADYN D and TELEPERM XP systems, quantity and clear nameplate photographs. -
What should engineering compare before integrating 6DL3100-8AA into the installed system?
Compare the documented SIMADYN D and TELEPERM XP systems role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to 6DL3100-8AA?
Inspect the 6DL3100-8AA label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same SIMADYN D and TELEPERM XP systems family directly replace 6DL3100-8AA?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing 6DL3100-8AA?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting 6DL3100-8AA. -
Which configuration data should be backed up before exchanging 6DL3100-8AA?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages.
READY TO VERIFY YOUR PART?
Get a 6DL3100-8AA quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6DL3100-8AAAddFEM PROFIBUS front-end moduleManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
