PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- 6ES7134-0HF00-0XB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7134-0HF00-0XB0 four-channel analog input module
Siemens 6ES7134-0HF00-0XB0 is a four-channel analog input module documented for SIMATIC ET 200B. It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete four-channel analog input module
ACTUAL APPLICATIONS
Application context for 6ES7134-0HF00-0XB0
Official manufacturer documentation supports these system uses when the complete SIMATIC ET 200B configuration is verified.
-
01 · CHEMICAL PROCESSING
Reactor and separation process areas
Process Signal AcquisitionPressure transmitter current loopsFlow and level measurement circuits -
02 · WATER & WASTEWATER
Intake and treatment pumping stations
Utility Measurement SystemsTank level transmitter inputsFlowmeter and pressure signal acquisition -
03 · POWER GENERATION
Boiler and turbine auxiliary plants
Plant Instrumentation SystemsFeedwater pressure measurement loopsCooling system flow transmitter inputs
Technical specifications for 6ES7134-0HF00-0XB0
-
Product Model6ES7134-0HF00-0XB0
-
Product ParametersFour-channel analog input module
-
In stock1 unit
-
ManufacturerSiemens
-
Module FunctionET 200B-4AI analog input
-
Analog Input Channels4
-
Current Ranges0 to 20 mA; 4 to 20 mA
-
Voltage Range±10 V
-
Conversion Resolution12 bit
-
Conversion MethodSuccessive approximation
-
Maximum Encoding Time0.1 ms per channel
-
Voltage Input Resistance100 kΩ
-
Current Input Resistance125 Ω
-
Maximum PROFIBUS Rate12 Mbit/s
-
Terminal BlockTB8
-
Rated Supply24 V DC
-
Supply Range18.5 to 30 V DC
-
Module IsolationElectronics isolated from PROFIBUS DP
-
Protection DegreeIP20
View all additional
Alternative Names
6ES7 134-0HF00-0XB0
SIMATIC ET 200B 4AI
Siemens four-channel analog input module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6ES7134-0HF00-0XB0 to the installed SIMATIC ET 200B
Siemens 6ES7134-0HF00-0XB0 is a four-channel analog input module for the SIMATIC ET 200B. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare voltage range (±10 V), conversion resolution (12 bit) and conversion method (Successive approximation) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6ES7134-0HF00-0XB0
- Product class: four-channel analog input module
- Family: SIMATIC ET 200B
The Siemens 6ES7134-0HF00-0XB0 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6ES7134-0HF00-0XB0 identity before exchange
Replace 6ES7134-0HF00-0XB0 only after matching the complete article code, four-channel analog input module, installed SIMATIC ET 200B role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6ES7134-0HF00-0XB0
- Product class: four-channel analog input module
- Family check: SIMATIC ET 200B
The Siemens 6ES7134-0HF00-0XB0 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6ES7134-0HF00-0XB0
- Siemens SIMATIC ET 200B references reviewed
- Exact Siemens identity required before service
Documentation for Siemens 6ES7134-0HF00-0XB0 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size9.9 × 16.8 × 6.1 cm
-
Shipping weight0.263 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7134-0HF00-0XB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which signals can this ET 200B module read?
It provides four analog inputs for 0–20 mA, 4–20 mA and ±10 V measurement circuits. Confirm the configured range for every channel before wiring. -
Is 6ES7134-0HF00-0XB0 a 12-bit module?
Yes. The documented ET 200B-4AI hardware uses 12-bit conversion for the supported current and voltage input ranges. -
What should replace a failed 4AI block?
Match the complete 6ES7134-0HF00-0XB0 order number, installed terminal block, channel ranges and project configuration. A similar ET 200B article is not automatically interchangeable. -
Which terminal block belongs with the module?
The technical family documentation identifies the TB8 analog terminal block. Verify the installed TB8 version and all field connections before removal. -
How fast is the analog conversion?
The successive-approximation converter is documented with a maximum encoding time of 0.1 ms per channel. -
What power check is required before installation?
Confirm a 24 V DC supply within the documented 18.5–30 V DC range and verify polarity, grounding and isolation before energizing the station. -
What should distributors verify on delivery?
Check the full suffix, Siemens label, ET 200B-4AI identity, TB8 compatibility, housing condition and connector integrity. Photograph the label for the receiving record. -
How is the replacement commissioned?
Restore the approved channel parameters, energize in the site sequence, confirm PROFIBUS diagnostics, then inject controlled current or voltage signals into every used channel.
READY TO VERIFY YOUR PART?
Get a 6ES7134-0HF00-0XB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
