PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- 6ES7157-0AC82-0XA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7157-0AC82-0XA0 DP/PA Link interface module
Siemens 6ES7157-0AC82-0XA0 is a DP/PA Link interface module in the SIMATIC DP/PA Link. It is used to connect compatible components and transfer the specified control or signal data.
Its documented configuration includes rated supply voltage of 24 VDC (20.4 V ... 28.8 V), power loss of the module of Typically 12 W, monitoring 24 v voltage supply of Green "ON" LED, and output voltage for pa section of 31 VDC ± 1 V. During operation, the DP/PA Link interface module performs its assigned DP/PA Link interface module function through the documented power, signal and communication interfaces.
Its documented configuration includes rated supply voltage of 24 VDC (20.4 V ... 28.8 V), power loss of the module of Typically 12 W, monitoring 24 v voltage supply of Green "ON" LED, and output voltage for pa section of 31 VDC ± 1 V. During operation, the DP/PA Link interface module performs its assigned DP/PA Link interface module function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete DP/PA Link interface module
ACTUAL APPLICATIONS
Where 6ES7157-0AC82-0XA0 Fits Across Major Industry Sectors
Uses span beverages, logistics and metals, subject to verified compatibility, operating conditions and project requirements.
-
01 · FOOD & BEVERAGE
Commercial Beverage Brewing, Bottling and Product Packaging
Commercial beverage brewing and processing for consumer drinks production.Beverage bottling and packaging for retail and wholesale distribution. -
02 · TRANSPORT & LOGISTICS
Warehouse Operations, Goods Distribution and Industrial Logistics
Warehouse storage and order fulfillment for industrial distribution operations.Internal material flow and goods movement within distribution facilities. -
03 · METALS & WIRE
Steel Production and Commercial Aluminum Material Processing
Steel production and material processing for industrial manufacturing demand.Aluminum production and finishing for commercial nonferrous metal markets.
Technical specifications for 6ES7157-0AC82-0XA0
-
Product Model6ES7157-0AC82-0XA0
-
Product ParametersDP/PA Link interface module
-
In stock1 unit
-
ManufacturerSiemens
-
Rated supply voltage24 VDC (20.4 V ... 28.8 V)
-
Power loss of the moduleTypically 12 W
-
Monitoring 24 V voltage supplyGreen "ON" LED
-
Output voltage for PA section31 VDC ± 1 V
-
Polarity reversal protectionYes
-
PA bus terminator switchYou can loop through the PROFIBUS PA on DP/PA couplers with a PA bus terminator
-
Bus module BM Y coupler: 6ES7654-7HY00-0XA0Active Field Distributor (AFD): 6ES7157-0AF81-0XA0
-
Bus module BM FDC 157-0: 6ES7195-7HG80-0XA0Bus module BM; DP/PA coupler: 6ES7195-7HF80-0XA0
-
Bus module BM; DP/PA coupler: 6ES7195-7HF80-0XA0Bus module BM Y coupler: 6ES7654-7HY00-0XA0
-
Bus module BM IM/IM: 6ES7195-7HD80-0XA0Bus module BM FDC 157-0: 6ES7195-7HG80-0XA0
-
Bus module BM PS/IM: 6ES7195-7HA00-0XA0Bus module BM IM/IM: 6ES7195-7HD10-0XA0
-
Bus module BM IM/IM: 6ES7195-7HD10-0XA0Bus module BM IM/IM: 6ES7195-7HD80-0XA0
-
Standards and approvals of theactive field distributors (AFD) and
-
following modulesDP/PA coupler (6ES7157-0AC82-0XA0)
-
max. power consumption of the PA fielddevices alogether 1 A
View all additional
Alternative Names
6ES7157-0AC82-0XA0
6ES7157 0AC82 0XA0
SIMATIC DP/PA Link DP/PA Link interface module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6ES7157-0AC82-0XA0 to the installed SIMATIC DP/PA Link
Siemens 6ES7157-0AC82-0XA0 is a DP/PA Link interface module for the SIMATIC DP/PA Link. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare output voltage for pa section (31 VDC ± 1 V), polarity reversal protection (Yes) and pa bus terminator switch (You can loop through the PROFIBUS PA on DP/PA couplers with a PA bus terminator) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6ES7157-0AC82-0XA0
- Product class: DP/PA Link interface module
- Family: SIMATIC DP/PA Link
The Siemens 6ES7157-0AC82-0XA0 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6ES7157-0AC82-0XA0 identity before exchange
Replace 6ES7157-0AC82-0XA0 only after matching the complete article code, DP/PA Link interface module, installed SIMATIC DP/PA Link role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6ES7157-0AC82-0XA0
- Product class: DP/PA Link interface module
- Family check: SIMATIC DP/PA Link
The Siemens 6ES7157-0AC82-0XA0 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6ES7157-0AC82-0XA0
- Product family: SIMATIC DP/PA Link
- Exact Siemens identity required before service
Documentation for Siemens 6ES7157-0AC82-0XA0 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size18.0 x 15.0 x 6.0 cm
-
Shipping weight0.50 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7157-0AC82-0XA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which rated supply voltage confirms the correct 6ES7157-0AC82-0XA0?
Match the complete 6ES7157-0AC82-0XA0 label and verify rated supply voltage is 24 VDC (20.4 V ... 28.8 V) before accepting the DP/PA Link interface module. -
What must engineering check around power loss of the module?
For 6ES7157-0AC82-0XA0, compare power loss of the module (Typically 12 W) with the installed wiring, host hardware and controlled project. -
Can another SIMATIC DP/PA Link article replace this unit?
Do not select a substitute from appearance alone. Compare 6ES7157-0AC82-0XA0, rated supply voltage, power loss of the module, connectors, firmware and the saved configuration. -
Which records protect the existing monitoring 24 v voltage supply setup?
Before removing 6ES7157-0AC82-0XA0, photograph labels and connections, then save configuration evidence associated with monitoring 24 v voltage supply (Green "ON" LED). -
How should the DP/PA Link interface module be inspected on arrival?
Inspect 6ES7157-0AC82-0XA0 for the exact article marking, connector damage, bent hardware, missing accessories and transport damage before disturbing the installed spare. -
Which functional test follows the 6ES7157-0AC82-0XA0 exchange?
Restore the approved setup, review diagnostics and test the affected SIMATIC DP/PA Link signal, network, control or drive path at a safe operating point. -
What data should a distributor quote for this configuration?
Provide 6ES7157-0AC82-0XA0, quantity, nameplate photographs, installed SIMATIC DP/PA Link system, required interfaces and destination country. -
How can MRO avoid receiving the wrong hardware revision?
Ask the supplier to confirm the full 6ES7157-0AC82-0XA0 identity, visible revision, rated supply voltage and connector layout against photographs before shipment.
READY TO VERIFY YOUR PART?
Get a 6ES7157-0AC82-0XA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
