PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- 6ES7193-1CH10-0XA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7193-1CH10-0XA0 SIMATIC DP TB16L spring terminal block for ET 200L
Siemens 6ES7193-1CH10-0XA0 is a SIMATIC DP TB16L spring terminal block for ET 200L for SIMATIC ET 200L. Its documented configuration includes terminal block designation: tb16l and terminal channels: 16.
The exact order code defines its compatible hardware and installation role. Consult the Siemens data sheet before fitting the component, then check the relevant interfaces and operating behavior after installation.
The exact order code defines its compatible hardware and installation role. Consult the Siemens data sheet before fitting the component, then check the relevant interfaces and operating behavior after installation.
BEFORE YOU BUY
Confirm the complete simatic dp tb16l spring terminal block for et 200l
ACTUAL APPLICATIONS
Application context for 6ES7193-1CH10-0XA0
6ES7193-1CH10-0XA0 serves industrial automation in SIMATIC ET 200L. The Siemens data sheet identifies terminal block designation: tb16l and terminal channels: 16, which determine its use in compatible controller cabinets and distributed control installations. These characteristics support machine equipment, utility control panels and facility automation where the specified Siemens hardware is installed.
-
01 · PULP & PAPER
Pulp, Paper and Forest Products Industries
Pulp and Paper ManufacturingTissue and Packaging Paper -
02 · WATER & WASTEWATER
Municipal Water Supply and Wastewater Treatment
Municipal Water SupplyIndustrial Wastewater Treatment -
03 · FOOD & BEVERAGE
Food, Beverage and Consumer Packaging Industries
Food and Beverage ManufacturingConsumer Packaging Industries
Technical specifications for 6ES7193-1CH10-0XA0
-
Product Model6ES7193-1CH10-0XA0
-
Product ParametersSIMATIC DP TB16L spring terminal block for ET 200L
-
In stock1 unit
-
ManufacturerSiemens
-
Terminal block designationTB16L
-
Terminal channels16
-
Connection typeSpring-type terminal
-
Compatible stationET 200L
-
Terminal block purposeI/O electrical connection
View all additional
Alternative Names
6ES7193-1CH10-0XA0
SIMATIC ET 200L SIMATIC DP TB16L spring terminal block for ET 200L
ET 200L TB16L terminal block designation
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7193-1CH10-0XA0 simatic dp tb16l spring terminal block for et 200l
The 6ES7193-1CH10-0XA0 belongs to SIMATIC ET 200L. Its terminal block designation: tb16l and terminal channels: 16 identify the relevant slot, electrical connection and project configuration. Check these against the installed equipment before connecting or replacing the part.
The manufacturer data also identifies connection type: spring-type terminal. Use the documented terminal arrangement and compatible hardware for this exact order code; do not transfer wiring or channel settings from a related variant without verification.
After installation, inspect mechanical seating and terminal connections, apply the approved project configuration where applicable, and test the affected I/O or backplane path. Record diagnostic indications and functional results before returning the cabinet to service.
Features:
- Terminal block designation: TB16L
- Terminal channels: 16
- Connection type: Spring-type terminal
The 6ES7193-1CH10-0XA0 simatic dp tb16l spring terminal block for et 200l requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7193-1CH10-0XA0 simatic dp tb16l spring terminal block for et 200l
Compare the full 6ES7193-1CH10-0XA0 order code with the removed component, including the S7-200 CN or ET 200 family designation. Confirm terminal block designation: tb16l and the installed mounting or terminal arrangement before exchange.
Document the label, slot position, neighboring modules and terminal allocation. Check terminal channels: 16 and connection type: spring-type terminal against the Siemens data sheet; related order numbers may use different output technology or electrical limits.
Install the matching article, restore the approved configuration and test each affected channel or connection. Verify supply and diagnostics, then record the replacement identity and the outcome of the functional checks.
Features:
- Terminal block designation: TB16L
- Terminal channels: 16
- Connection type: Spring-type terminal
The 6ES7193-1CH10-0XA0 simatic dp tb16l spring terminal block for et 200l requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7193-1CH10-0XA0 simatic dp tb16l spring terminal block for et 200l must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size14.5 × 10 × 4.05 cm
-
Shipping weight0.23 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7193-1CH10-0XA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which platform uses 6ES7193-1CH10-0XA0?
6ES7193-1CH10-0XA0 is documented for SIMATIC ET 200L. Confirm the complete order code against the installed hardware. -
What should maintenance teams check before fitting 6ES7193-1CH10-0XA0?
Check the article suffix, compatible slot or BaseUnit, wiring arrangement, and the Siemens data sheet for 6ES7193-1CH10-0XA0. -
Can 6ES7193-1CH10-0XA0 replace another module in the same family?
Only after its exact order code, electrical function, mounting and project configuration have been compared. A shared family name alone does not prove interchangeability. -
Are terminals or accessories included with 6ES7193-1CH10-0XA0?
Confirm the quoted scope. Separately ordered terminal blocks or accessories are supplied only when listed in the quotation. -
How should 6ES7193-1CH10-0XA0 be checked after installation?
Test the affected function and inspect supply, channel status or backplane diagnostics as applicable to this part. -
Where can the manufacturer data for 6ES7193-1CH10-0XA0 be reviewed?
The Manuals & support section links to the applicable Siemens reference and the Amikon data sheet. -
What product identity should a distributor quote for 6ES7193-1CH10-0XA0?
Quote the full 6ES7193-1CH10-0XA0 order code and any required compatible accessories, not only the product family. -
How are condition and availability confirmed for 6ES7193-1CH10-0XA0?
Request a written quote for current availability, condition, delivery terms and the exact article identity.
READY TO VERIFY YOUR PART?
Get a 6ES7193-1CH10-0XA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7193-1CH10-0XA0SIMATIC DP TB16L spring terminal block for ET 200LManufacturer: SiemensView Details
-
-
IC200GBI001-LLGenius network interface unit, LL revisionManufacturer: General ElectricView Details
-
IC200ALG240-KEEight-channel isolated analog input moduleManufacturer: General ElectricView Details
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
