PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- 6ES7650-8AK60-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7650-8AK60-0AA0 16-channel analog input module
Siemens 6ES7650-8AK60-0AA0 is a 16-channel analog input module in the SIMATIC ET 200PA SMART. It is used to acquire field signals and transfer their states or measured values to the controller.
Its documented configuration includes resolution of 15 bits + sign (regardless of integration time) of Setting of the transducer for each module (via a jumper at terminals 10 and 11), ambient temperature of permissible, 18, interface module im 650 of 9, and support.automation.siemens.com/ww/view/en/7215812) of ET 200M Distributed I/O Device HART Analog Modules (http://. During operation, the 16-channel analog input module receives the connected field signals, conditions their states or values and makes them available to the controller.
Its documented configuration includes resolution of 15 bits + sign (regardless of integration time) of Setting of the transducer for each module (via a jumper at terminals 10 and 11), ambient temperature of permissible, 18, interface module im 650 of 9, and support.automation.siemens.com/ww/view/en/7215812) of ET 200M Distributed I/O Device HART Analog Modules (http://. During operation, the 16-channel analog input module receives the connected field signals, conditions their states or values and makes them available to the controller.
BEFORE YOU BUY
Confirm the complete 16-channel analog input module
ACTUAL APPLICATIONS
Application context for 6ES7650-8AK60-0AA0
The applications below show typical industry settings, application scenarios, application areas and equipment for 6ES7650-8AK60-0AA0. Confirm the exact SIMATIC ET 200PA SMART configuration before use.
-
01 · CHEMICAL PROCESSING
Reactor and separation instrumentation
Process equipmentTransmitters and analyzersControl valves and shutdown devices -
02 · POWER GENERATION
Boiler and turbine auxiliary instrumentation
Plant equipmentBoiler feed pumps and dampersTurbine auxiliary valves and motors -
03 · WATER & WASTEWATER
Pumping and filtration instrumentation
Treatment equipmentLevel and flow transmittersPumps, valves and filter drives
Technical specifications for 6ES7650-8AK60-0AA0
-
Product Model6ES7650-8AK60-0AA0
-
Product Parameters16-channel analog input module
-
In stock1 unit
-
ManufacturerSiemens
-
Resolution of 15 bits + sign (regardless of integration time)Setting of the transducer for each module (via a jumper at terminals 10 and 11)
-
Ambient temperaturepermissible, 18
-
Interface module IM 6509
-
support.automation.siemens.com/WW/view/en/7215812)ET 200M Distributed I/O Device HART Analog Modules (http://
-
figure below using channel 0 as an example.The parameter assignment is made via HW Config as "2WMT current"
-
an ET 200PA SMART in the list of released modules PCS 7 (as of V8.1).If you are using modules from the S7-300 series of modules, you can find information for them
-
Standard module: 6ES7 650-8AK60-0AA0Module with conformal coating: 6ES7 650-8AK60-1AA0
-
Electrical isolationChannels electrically isolated for 4-wire transducer to load voltage L+
-
ET 200M, Signal Modules for Process Automation (http://support.automation.siemens.com/WW/view/en/7215812)
-
ET 200M Distributed I/O Device HART Analog Modules (http://support.automation.siemens.com/WW/view/en/22063748)
-
Configuration in Run (CiR) supportedWiring and block diagrams of the AI 8 x 16 Bit with 2-wire transducer operation
-
support.automation.siemens.com/WW/view/en/22063748)Operating Instructions, 05/2020, A5E34192013-AC
-
Analog input module AI 16 x 16 Bit, 192Analog input module AI 8 x 16 Bit, 165
-
Group error display (SF LED)Configuration in Run (CiR) supported
-
Analog output moduleShort-circuit to ground, 225, 235
View all additional
Alternative Names
6ES7650-8AK60-0AA0
6ES7650 8AK60 0AA0
SIMATIC ET 200PA SMART 16-channel analog input module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6ES7650-8AK60-0AA0 to the installed SIMATIC ET 200PA SMART
Siemens 6ES7650-8AK60-0AA0 is a 16-channel analog input module for the SIMATIC ET 200PA SMART. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare support.automation.siemens.com/ww/view/en/7215812) (ET 200M Distributed I/O Device HART Analog Modules (http://), figure below using channel 0 as an example. (The parameter assignment is made via HW Config as "2WMT current") and an et 200pa smart in the list of released modules pcs 7 (as of v8.1). (If you are using modules from the S7-300 series of modules, you can find information for them) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6ES7650-8AK60-0AA0
- Product class: 16-channel analog input module
- Family: SIMATIC ET 200PA SMART
The Siemens 6ES7650-8AK60-0AA0 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6ES7650-8AK60-0AA0 identity before exchange
Replace 6ES7650-8AK60-0AA0 only after matching the complete article code, 16-channel analog input module, installed SIMATIC ET 200PA SMART role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6ES7650-8AK60-0AA0
- Product class: 16-channel analog input module
- Family check: SIMATIC ET 200PA SMART
The Siemens 6ES7650-8AK60-0AA0 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6ES7650-8AK60-0AA0
- Product family: SIMATIC ET 200PA SMART
- Exact Siemens identity required before service
Documentation for Siemens 6ES7650-8AK60-0AA0 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size16.0 x 13.0 x 6.0 cm
-
Shipping weight0.40 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538909190
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7650-8AK60-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which resolution of 15 bits + sign (regardless of integration time) confirms the correct 6ES7650-8AK60-0AA0?
Match the complete 6ES7650-8AK60-0AA0 label and verify resolution of 15 bits + sign (regardless of integration time) is Setting of the transducer for each module (via a jumper at terminals 10 and 11) before accepting the 16-channel analog input module. -
What must engineering check around ambient temperature?
For 6ES7650-8AK60-0AA0, compare ambient temperature (permissible, 18) with the installed wiring, host hardware and controlled project. -
Can another SIMATIC ET 200PA SMART article replace this unit?
Do not select a substitute from appearance alone. Compare 6ES7650-8AK60-0AA0, resolution of 15 bits + sign (regardless of integration time), ambient temperature, connectors, firmware and the saved configuration. -
Which records protect the existing interface module im 650 setup?
Before removing 6ES7650-8AK60-0AA0, photograph labels and connections, then save configuration evidence associated with interface module im 650 (9). -
How should the 16-channel analog input module be inspected on arrival?
Inspect 6ES7650-8AK60-0AA0 for the exact article marking, connector damage, bent hardware, missing accessories and transport damage before disturbing the installed spare. -
Which functional test follows the 6ES7650-8AK60-0AA0 exchange?
Restore the approved setup, review diagnostics and test the affected SIMATIC ET 200PA SMART signal, network, control or drive path at a safe operating point. -
What data should a distributor quote for this configuration?
Provide 6ES7650-8AK60-0AA0, quantity, nameplate photographs, installed SIMATIC ET 200PA SMART system, required interfaces and destination country. -
How can MRO avoid receiving the wrong hardware revision?
Ask the supplier to confirm the full 6ES7650-8AK60-0AA0 identity, visible revision, resolution of 15 bits + sign (regardless of integration time) and connector layout against photographs before shipment.
READY TO VERIFY YOUR PART?
Get a 6ES7650-8AK60-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
