PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- 6FM1726-3CA00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6FM1726-3CA00 positioning control module
spare part positioning module WF 726C V 1.5 for serial-absolute and incremental position encoders Confirm the complete article identity, installed configuration and manufacturer documentation before ordering or replacement.
BEFORE YOU BUY
Confirm the complete positioning control module
ACTUAL APPLICATIONS
Application context for 6FM1726-3CA00
Manufacturer documentation places the Positioning Control Module in practical automation applications. The three cases below describe different operating tasks in which 6FM1726-3CA00 performs its documented product-family role with the configured companion equipment.
-
01 · MACHINERY MANUFACTURING
Balance press sequencing with Positioning Control
Across the feed systems, dies and safety interfaces, 6FM1726-3CA00 provides its specified system function as a Positioning Control Module. During part change, the system uses this function to apply the selected product recipe to the sequence, helping it produce the intended part without skipping an interlock. -
02 · CHEMICAL & PETROCHEMICAL
Verify reactor charging with Positioning Control
For the coordinated operation of the feed valves, vessels and agitators, 6FM1726-3CA00 provides its specified system function as a Positioning Control Module. During batch initiation, the system uses this function to sequence the material path against vessel readiness, helping it begin the reaction from a verified state. -
03 · POWER GENERATION
Monitor cooling-water circulation with Positioning Control
Within the circulating pumps and heat exchangers, 6FM1726-3CA00 serves its documented function as a Positioning Control Module. During controlled shutdown, the system uses this function to sequence redundant equipment around the operating unit, helping it keep heat rejection available to the process.
Technical specifications for 6FM1726-3CA00
-
Product Model6FM1726-3CA00
-
Product Parameterspositioning control module
-
In stock1 unit
-
ManufacturerSiemens
-
Controller TypeWF 715
-
Control FunctionShaft cam control
-
Module FormatS5 rack module
-
Position InputIncremental encoder
-
Digital OutputsCam switching outputs
-
Control SupplyBackplane supplied
-
MountingAutomation rack
-
Protection ClassIP20
-
ProgrammingParameter set
-
Diagnostic ModeModule status
View all additional
Alternative Names
6FM1726 3CA00
SIMATIC automation modules positioning control module
Siemens positioning control module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6FM1726-3CA00 to the installed SIMATIC automation modules
Siemens 6FM1726-3CA00 is a positioning control module used in the SIMATIC automation modules. Apply 6FM1726-3CA00 only in the manufacturer-specified SIMATIC automation modules position. Match the complete article number, electrical interfaces and adjacent hardware before service.
Record connector keying, terminal assignments, shields, protective earth and neighboring assemblies for 6FM1726-3CA00; restore the same controlled arrangement during installation. Confirm digital outputs (Cam switching outputs), control supply (Backplane supplied), the exact mechanical position and approved system configuration before connection.
After installing 6FM1726-3CA00, review system diagnostics and test the affected signals, communication or controlled equipment at a safe operating point. Record the final acceptance results. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 6FM1726-3CA00
- Product class: positioning control module
- Family: SIMATIC automation modules
The Siemens 6FM1726-3CA00 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6FM1726-3CA00 identity before exchange
Replace 6FM1726-3CA00 only after matching the full article identity, positioning control module, module format (S5 rack module) and documented system role. Confirm that the installed hardware version and controlled configuration agree with the manufacturer record.
Before removal, photograph the product label, mounting position, protection class (IP20), cable routing, shields, earth connections and adjacent assemblies. Preserve the approved program, parameter set or network configuration needed for recovery.
After installation, verify programming (Parameter set) and diagnostic mode (Module status). Review diagnostics, test the affected function at a safe operating point and record the final maintenance acceptance evidence.
Features:
- Exact identity: 6FM1726-3CA00
- Protection Class: IP20
- Diagnostic Mode: Module status
The Siemens 6FM1726-3CA00 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 6FM1726-3CA00
- Installation checks matched to SIMATIC automation modules
- Exact Siemens identity required before service
Documentation for Siemens 6FM1726-3CA00 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30 × 4 cm
-
Shipping weight1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6FM1726-3CA00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which controller type value must match when sourcing 6FM1726-3CA00?
6FM1726-3CA00 is documented with Controller Type WF 715. Compare this value, the full order number and installed system record before purchase. -
How should engineering verify control function for 6FM1726-3CA00?
Use the manufacturer data and installed configuration to confirm Control Function Shaft cam control; retain the checked value in the replacement work pack. -
What does module format S5 rack module mean for installing 6FM1726-3CA00?
The installation must satisfy Module Format S5 rack module together with the documented power, interface, mounting and environmental limits for 6FM1726-3CA00. -
Which compatibility records should accompany a distributor quote for 6FM1726-3CA00?
Provide the complete model, quantity, nameplate photos, installed SIMATIC automation modules, required interfaces and destination country. Include project or network records when relevant. -
Can 6FM1726-3CA00 replace a similar positioning control module without configuration changes?
Do not decide by appearance. Match the full order number, hardware or firmware level, Position Input Incremental encoder, interfaces and approved project before exchange. -
What should receiving inspection check on 6FM1726-3CA00 before installation?
Check the exact label, housing, connectors, terminals, mounting points and supplied accessories. Reject damage, contamination, bent pins or unreadable identification. -
Which connection evidence should maintenance capture before removing 6FM1726-3CA00?
Photograph connector keying, cable destinations, port assignments, shields, protective earth and adjacent modules. Save the controlled configuration and current diagnostics. -
What commissioning result confirms 6FM1726-3CA00 is ready for service?
Confirm normal diagnostics, communication and affected equipment response, then test the documented positioning control module function under controlled conditions and record acceptance.
READY TO VERIFY YOUR PART?
Get a 6FM1726-3CA00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
