PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- 6GF3440-1CD10
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6GF3440-1CD10 SIMATIC MV440 stationary code reader
Siemens 6GF3440-1CD10 is a SIMATIC MV440 stationary code reader in the SIMATIC machine vision systems. The article-specific data identifies its control role, communication or signal interface and installed system compatibility. Confirm the complete nameplate, electrical class, revision, companion equipment and controlled configuration before ordering.
BEFORE YOU BUY
Confirm the complete SIMATIC MV440 stationary code reader
ACTUAL APPLICATIONS
Application context for 6GF3440-1CD10
Manufacturer documentation places the SIMATIC MV440 stationary code reader in practical automation applications. The three cases below describe different operating tasks in which 6GF3440-1CD10 performs its documented product-family role with the configured companion equipment.
-
01 · MACHINERY MANUFACTURING
Track test-stand control with Simatic Mv440 process control
As part of the load actuators and measurement channels, 6GF3440-1CD10 handles its designated signal or control duty as a SIMATIC MV440 stationary code reader. During test-point transition, the system uses this function to move the test article through commanded operating points, helping it capture comparable results at each condition. -
02 · WATER & WASTEWATER
Regulate aeration control during changing oxygen demand
Across the blowers and dissolved-oxygen loops, 6GF3440-1CD10 provides its specified system function as a SIMATIC MV440 stationary code reader. During changing oxygen demand, the system uses this function to adjust air delivery from process feedback, helping it stabilize treatment performance. -
03 · GENERAL MANUFACTURING
Govern conveyor routing with Simatic Mv440 process control
In the automation chain for the zone conveyors and merge points, 6GF3440-1CD10 provides its specified system function as a SIMATIC MV440 stationary code reader. During route change, the system uses this function to coordinate destination data with equipment permissives, helping it move the item to the assigned process.
Technical specifications for 6GF3440-1CD10
-
Product Model6GF3440-1CD10
-
Product ParametersSIMATIC MV440 stationary code reader
-
In stock1 unit
-
ManufacturerSiemens
-
Exact Article Code6GF3440-1CD10
-
Product ClassSimatic Mv440 Stationary Code Reader
-
Product FamilySIMATIC machine vision systems
-
Image Sensor1/3-inch CCD
-
Image Resolution640 × 480 pixels
-
Shutter TypeGlobal shutter
-
Ethernet InterfaceM12 D-coded with PoE
-
Serial InterfaceRS 422, M12 8-pin
-
I/O Interface5 digital inputs / 5 digital outputs
-
Status Indication5 front LEDs
-
Protection ClassIP67
-
Operating Temperature0 to +50 °C
-
Code Types1D and 2D machine-readable codes
-
Trigger ModeDigital input / communication trigger
View all additional
Alternative Names
6GF3440 1CD10
Siemens SIMATIC MV440 stationary code reader
SIMATIC machine vision systems SIMATIC MV440 stationary code reader
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 6GF3440-1CD10 to the installed SIMATIC machine vision systems
Siemens 6GF3440-1CD10 is a SIMATIC MV440 stationary code reader for the SIMATIC machine vision systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare image sensor (1/3-inch CCD), image resolution (640 × 480 pixels) and shutter type (Global shutter) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 6GF3440-1CD10
- Product class: SIMATIC MV440 stationary code reader
- Family: SIMATIC machine vision systems
The Siemens 6GF3440-1CD10 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 6GF3440-1CD10 identity before exchange
Replace 6GF3440-1CD10 only after matching the complete article code, SIMATIC MV440 stationary code reader, installed SIMATIC machine vision systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 6GF3440-1CD10
- Product class: SIMATIC MV440 stationary code reader
- Family check: SIMATIC machine vision systems
The Siemens 6GF3440-1CD10 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 6GF3440-1CD10
- Product family: SIMATIC machine vision systems
- Exact Siemens identity required before service
Documentation for Siemens 6GF3440-1CD10 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size7.5 × 13.3 × 4.5 cm
-
Shipping weight0.45 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6GF3440-1CD10
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can another article in the same SIMATIC machine vision systems family directly replace 6GF3440-1CD10?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing 6GF3440-1CD10?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting 6GF3440-1CD10. -
Which configuration data should be backed up before exchanging 6GF3440-1CD10?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission 6GF3440-1CD10 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected SIMATIC MV440 stationary code reader function at a safe operating point. -
What service evidence should be retained after work on 6GF3440-1CD10?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for 6GF3440-1CD10. -
Which nameplate details identify the correct 6GF3440-1CD10 for a distributor quotation?
Quote 6GF3440-1CD10 with the complete suffix, SIMATIC MV440 stationary code reader, SIMATIC machine vision systems, quantity and clear nameplate photographs. -
What should engineering compare before integrating 6GF3440-1CD10 into the installed system?
Compare the documented SIMATIC machine vision systems role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to 6GF3440-1CD10?
Inspect the 6GF3440-1CD10 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage.
READY TO VERIFY YOUR PART?
Get a 6GF3440-1CD10 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
